Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC16HV753-I/P
자세히보기 데이터시트

PIC16HV753-I/P

Introduction

The PIC16HV753-I/P is a microcontroller belonging to the PIC16 family of microcontrollers produced by Microchip Technology. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded control applications
  • Characteristics: High voltage operation, low power consumption
  • Package: 18-pin PDIP (Plastic Dual In-line Package)
  • Essence: Control and monitoring of various electronic systems
  • Packaging/Quantity: Tube/50 units

Specifications

  • Operating Voltage: 2.5V - 5.5V
  • CPU Speed: 20 MHz
  • Program Memory Size: 3.5 KB
  • RAM Size: 128 Bytes
  • I/O Pins: 12
  • Timers: 1 x 8-bit, 1 x 16-bit
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The PIC16HV753-I/P features an 18-pin PDIP package with the following pin configuration: 1. VDD 2. RA0/AN0 3. RA1/AN1 4. RA2/AN2 5. RA3/AN3/VREF- 6. RA4/T0CKI/C1OUT 7. VSS 8. OSC1/CLKIN 9. OSC2/CLKOUT 10. RC0/T1OSO/T1CKI 11. RC1/T1OSI/CCP2 12. RC2/CCP1 13. RC3/SCL/SDA 14. RC4/SDI/SDA 15. RC5/SDO 16. RC6/TX/CK 17. RC7/RX/DT 18. VSS

Functional Features

  • High-voltage operation allows direct drive of LEDs and relays
  • Low-power consumption for energy-efficient applications
  • Integrated analog peripherals for sensor interfacing
  • Enhanced capture/compare/PWM (ECCP) module for motor control applications

Advantages and Disadvantages

Advantages

  • High voltage operation expands application possibilities
  • Low power consumption prolongs battery life in portable devices
  • Integrated analog peripherals simplify sensor interfacing
  • ECCP module enhances motor control capabilities

Disadvantages

  • Limited program memory size may restrict complex application development
  • Limited RAM size may constrain data processing capabilities

Working Principles

The PIC16HV753-I/P operates based on the Harvard architecture, featuring separate program and data memories. It executes instructions fetched from program memory and manipulates data stored in data memory to perform various control and monitoring tasks in embedded systems.

Detailed Application Field Plans

The PIC16HV753-I/P is suitable for a wide range of embedded control applications, including but not limited to: - Home automation systems - Industrial control systems - Automotive electronics - Consumer electronics - Medical devices

Detailed and Complete Alternative Models

  • PIC16F753
  • PIC16LF753
  • PIC16HV753

In summary, the PIC16HV753-I/P microcontroller offers high-voltage operation, low power consumption, and integrated analog peripherals, making it suitable for diverse embedded control applications. While it has limitations in program and data memory size, it provides enhanced motor control capabilities through its ECCP module. Its versatility and compatibility with alternative models make it a valuable choice for various electronic system designs.

Word count: 536

기술 솔루션에 PIC16HV753-I/P 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum operating frequency of PIC16HV753-I/P?
    - The maximum operating frequency of PIC16HV753-I/P is 20 MHz.

  2. Can PIC16HV753-I/P be used in automotive applications?
    - Yes, PIC16HV753-I/P is suitable for automotive applications due to its robust design and wide operating voltage range.

  3. Does PIC16HV753-I/P have built-in analog-to-digital converters (ADC)?
    - Yes, PIC16HV753-I/P features a 10-bit ADC with up to 8 channels.

  4. What communication interfaces are supported by PIC16HV753-I/P?
    - PIC16HV753-I/P supports SPI, I2C, and UART communication interfaces.

  5. Is PIC16HV753-I/P compatible with MPLAB X IDE for programming and debugging?
    - Yes, PIC16HV753-I/P is fully compatible with MPLAB X IDE for development and debugging.

  6. What is the typical power consumption of PIC16HV753-I/P in active mode?
    - The typical power consumption of PIC16HV753-I/P in active mode is 50 µA/MHz.

  7. Can PIC16HV753-I/P operate in harsh industrial environments?
    - Yes, PIC16HV753-I/P is designed to operate reliably in harsh industrial environments with its wide temperature range and robust construction.

  8. Does PIC16HV753-I/P support low-power sleep modes?
    - Yes, PIC16HV753-I/P offers multiple low-power sleep modes to minimize power consumption during idle periods.

  9. What is the maximum number of I/O pins available on PIC16HV753-I/P?
    - PIC16HV753-I/P provides up to 25 I/O pins for versatile connectivity and control.

  10. Is there a development board available for PIC16HV753-I/P to facilitate rapid prototyping?
    - Yes, there are several development boards and evaluation kits available for PIC16HV753-I/P to aid in rapid prototyping and testing.