PIC16LC57C-04I/SP

Product Overview

Category

The PIC16LC57C-04I/SP belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

• Low power consumption
• High performance
• Small form factor
• Wide operating voltage range
• Integrated peripherals for enhanced functionality

Package

The PIC16LC57C-04I/SP is available in a 28-pin plastic dual inline package (DIP).

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact and low-power package.

Packaging/Quantity

The PIC16LC57C-04I/SP is typically packaged in reels or tubes, with a quantity of 25 units per package.

Specifications

• Microcontroller Family: PIC16
• CPU Speed: 4 MHz
• Program Memory Size: 2 KB
• RAM Size: 72 bytes
• Number of I/O Pins: 22
• ADC Channels: 5
• Timers: 1 x 8-bit, 1 x 16-bit
• Operating Voltage Range: 2.0V to 5.5V
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC16LC57C-04I/SP has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

1. VDD - Power supply voltage
2. RA0 - General-purpose I/O pin
3. RA1 - General-purpose I/O pin
4. RA2 - General-purpose I/O pin
5. RA3 - General-purpose I/O pin
6. RA4 - General-purpose I/O pin
7. RA5 - General-purpose I/O pin
8. VSS - Ground
9. OSC1/CLKIN - Oscillator input
10. OSC2/CLKOUT - Oscillator output
11. RC0 - General-purpose I/O pin
12. RC1 - General-purpose I/O pin
13. RC2 - General-purpose I/O pin
14. RC3 - General-purpose I/O pin
15. RC4 - General-purpose I/O pin
16. RC5 - General-purpose I/O pin
17. MCLR/VPP - Master Clear/Voltage Programming Pin
18. RB0/INT - General-purpose I/O pin / External Interrupt
19. RB1 - General-purpose I/O pin
20. RB2 - General-purpose I/O pin
21. RB3 - General-purpose I/O pin
22. RB4 - General-purpose I/O pin
23. RB5 - General-purpose I/O pin
24. RB6 - General-purpose I/O pin
25. RB7 - General-purpose I/O pin
26. VDD - Power supply voltage
27. VSS - Ground
28. RB3/PGM - General-purpose I/O pin / In-Circuit Serial Programming

Functional Features

The PIC16LC57C-04I/SP microcontroller offers the following functional features:

1. Central Processing Unit (CPU) with 8-bit architecture for efficient data processing.
2. Flash program memory for storing user programs and data.
3. EEPROM data memory for non-volatile storage of critical information.
4. Analog-to-Digital Converter (ADC) for converting analog signals into digital values.
5. Timers for precise timing and event generation.
6. Various communication interfaces such as UART, SPI, and I2C for seamless connectivity.
7. Integrated peripherals like comparators, PWM modules, and GPIO pins for enhanced functionality.

Advantages and Disadvantages

Advantages

• Low power consumption makes it suitable for battery-powered applications.
• Compact form factor allows for integration into space-constrained designs.
• Wide operating voltage range provides flexibility in different power supply scenarios.
• Integrated peripherals reduce the need for external components, saving cost and board space.

Disadvantages

• Limited program memory size may restrict the complexity of applications.
• Limited RAM size may impose constraints on data storage and manipulation.
• Lack of advanced features compared to higher-end microcontrollers.

Working Principles

The PIC16LC57C-04I/SP operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its program memory, processes data, and interacts with various peripherals and external devices as per the user's program.

Detailed Application Field Plans

The PIC16LC57C-04I/SP finds applications in a wide range of fields, including but not limited to:

1. Home automation systems
2. Industrial control systems
3. Automotive electronics
4. Medical devices
5. Consumer electronics
6. Internet of Things (IoT) devices