Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC16LC65B-04/P
자세히보기 데이터시트

PIC16LC65B-04/P

Product Overview

Category

The PIC16LC65B-04/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • Low power consumption
  • High performance
  • Compact size
  • Versatile functionality

Package

The PIC16LC65B-04/P is available in a 40-pin PDIP (Plastic Dual In-line Package) package.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact form factor.

Packaging/Quantity

The PIC16LC65B-04/P is typically packaged in reels or tubes, with a quantity of 100 units per package.

Specifications

  • Architecture: 8-bit
  • CPU Speed: 4 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 368 bytes
  • Number of I/O Pins: 33
  • Operating Voltage Range: 2.5V to 5.5V
  • Data Bus Width: 8 bits
  • ADC Channels: 5
  • Timers: 3
  • Communication Interfaces: USART, SPI, I2C

Detailed Pin Configuration

The PIC16LC65B-04/P has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. MCLR - Master Clear input
  9. VSS - Ground
  10. RB0 - General-purpose I/O pin
  11. RB1 - General-purpose I/O pin
  12. RB2 - General-purpose I/O pin
  13. RB3 - General-purpose I/O pin
  14. RB4 - General-purpose I/O pin
  15. RB5 - General-purpose I/O pin
  16. RB6 - General-purpose I/O pin
  17. RB7 - General-purpose I/O pin
  18. VDD - Power supply voltage
  19. RC0 - General-purpose I/O pin
  20. RC1 - General-purpose I/O pin
  21. RC2 - General-purpose I/O pin
  22. RC3 - General-purpose I/O pin
  23. RC4 - General-purpose I/O pin
  24. RC5 - General-purpose I/O pin
  25. RC6 - General-purpose I/O pin
  26. RC7 - General-purpose I/O pin
  27. OSC1 - Oscillator input
  28. OSC2 - Oscillator output
  29. VSS - Ground
  30. RD0 - General-purpose I/O pin
  31. RD1 - General-purpose I/O pin
  32. RD2 - General-purpose I/O pin
  33. RD3 - General-purpose I/O pin
  34. RD4 - General-purpose I/O pin
  35. RD5 - General-purpose I/O pin
  36. RD6 - General-purpose I/O pin
  37. RD7 - General-purpose I/O pin
  38. VDD - Power supply voltage
  39. VSS - Ground
  40. RB3/PGM - Programming mode select

Functional Features

The PIC16LC65B-04/P microcontroller offers the following functional features:

  1. Central Processing Unit (CPU): Executes instructions and performs calculations.
  2. Memory: Stores program code and data.
  3. Input/Output (I/O) Ports: Facilitates communication with external devices.
  4. Timers: Enables precise timing and event triggering.
  5. Analog-to-Digital Converter (ADC): Converts analog signals to digital for processing.
  6. Communication Interfaces: Supports serial communication protocols like USART, SPI, and I2C.

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered applications.
  • High-performance capabilities enable efficient data processing.
  • Compact size allows for integration into space-constrained designs.
  • Versatile functionality meets the requirements of various applications.

Disadvantages

  • Limited program memory size may restrict the complexity of applications.
  • Relatively low RAM size may limit the amount of data that can be processed simultaneously.
  • Lack of advanced features compared to more modern microcontrollers.

Working Principles

The PIC16LC65B-04/P operates based on the principles of a typical microcontroller. It follows a fetch-decode-execute cycle, where instructions are fetched from program memory, decoded, and executed by the CPU. The microcontroller interacts with external devices through its I/O ports, enabling input and output operations.

기술 솔루션에 PIC16LC65B-04/P 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the operating voltage range of PIC16LC65B-04/P?
    - The operating voltage range of PIC16LC65B-04/P is 2.5V to 5.5V.

  2. What is the maximum clock frequency supported by PIC16LC65B-04/P?
    - PIC16LC65B-04/P supports a maximum clock frequency of 20 MHz.

  3. Can PIC16LC65B-04/P be used in battery-powered applications?
    - Yes, PIC16LC65B-04/P's low operating voltage range makes it suitable for battery-powered applications.

  4. What are the key features of PIC16LC65B-04/P?
    - Key features of PIC16LC65B-04/P include 8-bit CPU, 14-bit instruction set, and multiple communication interfaces.

  5. Is PIC16LC65B-04/P suitable for temperature-sensitive environments?
    - Yes, PIC16LC65B-04/P has a wide operating temperature range, making it suitable for temperature-sensitive environments.

  6. Can PIC16LC65B-04/P be programmed using standard programming tools?
    - Yes, PIC16LC65B-04/P can be programmed using standard programming tools such as MPLAB® ICD 4.

  7. What are the available memory options for PIC16LC65B-04/P?
    - PIC16LC65B-04/P is available with various memory options including Flash, EEPROM, and SRAM.

  8. Does PIC16LC65B-04/P support analog-to-digital conversion?
    - Yes, PIC16LC65B-04/P features an integrated 10-bit ADC module for analog-to-digital conversion.

  9. Can PIC16LC65B-04/P be used in industrial control applications?
    - Yes, PIC16LC65B-04/P is suitable for industrial control applications due to its robust design and communication capabilities.

  10. Are there any development boards available for PIC16LC65B-04/P?
    - Yes, there are development boards specifically designed for PIC16LC65B-04/P to aid in rapid prototyping and testing.