Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC17LC44-08I/L
자세히보기 데이터시트

PIC17LC44-08I/L

Product Overview

Category

The PIC17LC44-08I/L belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for controlling and processing data.

Characteristics

  • High-performance microcontroller with advanced features
  • Low power consumption
  • Compact size
  • Wide operating voltage range
  • Robust design for reliable operation

Package

The PIC17LC44-08I/L is available in a compact package, suitable for surface mount technology (SMT) applications.

Essence

The essence of the PIC17LC44-08I/L lies in its ability to provide efficient control and processing capabilities in a small form factor.

Packaging/Quantity

The microcontroller is typically packaged in reels or tubes, containing a specific quantity per package. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Architecture: 8-bit
  • CPU Speed: 8 MHz
  • Program Memory Size: 4 KB
  • RAM Size: 192 bytes
  • Number of I/O Pins: 13
  • Operating Voltage Range: 2.5V - 5.5V
  • Data Bus Width: 8 bits
  • ADC Channels: 4
  • Timers: 1 x 8-bit, 1 x 16-bit
  • Communication Interfaces: UART, SPI, I2C

Detailed Pin Configuration

The PIC17LC44-08I/L has a total of 20 pins, each serving a specific function. Here is the detailed pin configuration:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. MCLR - Master Clear input
  8. VSS - Ground
  9. RB0 - General-purpose I/O pin
  10. RB1 - General-purpose I/O pin
  11. RB2 - General-purpose I/O pin
  12. RB3 - General-purpose I/O pin
  13. RB4 - General-purpose I/O pin
  14. RB5 - General-purpose I/O pin
  15. RB6 - General-purpose I/O pin
  16. RB7 - General-purpose I/O pin
  17. OSC1/CLKIN - Oscillator input
  18. OSC2/CLKOUT - Oscillator output
  19. VDD - Power supply voltage
  20. VSS - Ground

Functional Features

  • High-speed processing capabilities
  • On-chip memory for program storage and data handling
  • Multiple communication interfaces for seamless integration with other devices
  • Analog-to-Digital Converter (ADC) for analog signal processing
  • Timers for precise timing control
  • General-purpose I/O pins for flexible connectivity
  • Low power consumption for energy-efficient operation

Advantages and Disadvantages

Advantages

  • Compact size allows for space-saving designs
  • Wide operating voltage range enables compatibility with various power sources
  • Robust design ensures reliable performance in demanding environments
  • Versatile I/O pins offer flexibility in connecting external components
  • Low power consumption prolongs battery life in portable applications

Disadvantages

  • Limited program memory size may restrict the complexity of applications
  • Limited RAM size may impose constraints on data storage and manipulation
  • Lack of advanced features found in higher-end microcontrollers

Working Principles

The PIC17LC44-08I/L operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, processes data from various sources, and controls external devices through its I/O pins. The microcontroller's central processing unit (CPU) performs arithmetic, logic, and control operations to carry out the desired tasks.

Detailed Application Field Plans

The PIC17LC44-08I/L finds applications in various fields, including but not limited to:

  1. Home automation systems
  2. Industrial control systems
  3. Automotive electronics
  4. Medical devices
  5. Consumer electronics
  6. Internet of Things (IoT) devices
  7. Robotics
  8. Security systems

Detailed and Complete Alternative Models

  1. PIC16F877A
  2. PIC18F4520
  3. ATmega328P
  4. STM32F103C8T6
  5. MSP430G2553

These alternative models offer similar functionalities and can be considered as alternatives to the PIC17LC44-08I/L depending on specific requirements and preferences.

In conclusion, the PIC17LC44-08I/L is a high-performance microcontroller with advanced features, compact size, and low power consumption. It finds applications in various fields and offers flexibility through its I/O pins. While it has certain limitations,

기술 솔루션에 PIC17LC44-08I/L 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the operating voltage range of PIC17LC44-08I/L?
    - The operating voltage range of PIC17LC44-08I/L is 2.5V to 5.5V.

  2. What is the maximum clock frequency supported by PIC17LC44-08I/L?
    - PIC17LC44-08I/L supports a maximum clock frequency of 20 MHz.

  3. Can PIC17LC44-08I/L be used in battery-powered applications?
    - Yes, PIC17LC44-08I/L's low operating voltage range makes it suitable for battery-powered applications.

  4. Does PIC17LC44-08I/L have built-in analog-to-digital conversion capabilities?
    - No, PIC17LC44-08I/L does not have built-in analog-to-digital conversion capabilities.

  5. What are the available communication interfaces on PIC17LC44-08I/L?
    - PIC17LC44-08I/L supports SPI and I2C communication interfaces.

  6. Is PIC17LC44-08I/L suitable for motor control applications?
    - Yes, PIC17LC44-08I/L can be used for simple motor control applications.

  7. Can PIC17LC44-08I/L be programmed using C language?
    - Yes, PIC17LC44-08I/L can be programmed using C language with appropriate compilers.

  8. What is the maximum number of I/O pins available on PIC17LC44-08I/L?
    - PIC17LC44-08I/L has 33 I/O pins available for general-purpose use.

  9. Does PIC17LC44-08I/L have any built-in security features?
    - Yes, PIC17LC44-08I/L includes hardware and software security features to protect code and data.

  10. Can PIC17LC44-08I/L be used in industrial automation applications?
    - Yes, PIC17LC44-08I/L is suitable for various industrial automation applications due to its robust features and performance.