Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC18F4423-E/P
자세히보기 데이터시트

PIC18F4423-E/P

Product Overview

Category

The PIC18F4423-E/P belongs to the category of microcontrollers.

Use

This microcontroller is widely used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 8-bit architecture
  • Flash-based program memory
  • Enhanced features for efficient code execution
  • Wide range of peripherals for versatile application development

Package

The PIC18F4423-E/P is available in a 40-pin PDIP (Plastic Dual Inline Package) format.

Essence

The essence of the PIC18F4423-E/P lies in its ability to provide advanced control and processing capabilities in a compact and easily integrable package.

Packaging/Quantity

The PIC18F4423-E/P is typically packaged in reels or tubes, with quantities varying based on the manufacturer's specifications.

Specifications

  • Microcontroller Family: PIC18F
  • Core Size: 8-bit
  • Program Memory Size: 16KB
  • RAM Size: 768 bytes
  • Number of I/O Pins: 33
  • Operating Voltage Range: 2.0V to 5.5V
  • Maximum Clock Frequency: 40 MHz
  • Data Bus Width: 8-bit
  • ADC Resolution: 10-bit
  • Communication Interfaces: UART, SPI, I2C

Detailed Pin Configuration

The PIC18F4423-E/P has a total of 40 pins, each serving a specific purpose. The detailed pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RB0 - General-purpose I/O pin
  18. RB1 - General-purpose I/O pin
  19. RB2 - General-purpose I/O pin
  20. RB3 - General-purpose I/O pin
  21. RB4 - General-purpose I/O pin
  22. RB5 - General-purpose I/O pin
  23. RB6 - General-purpose I/O pin
  24. RB7 - General-purpose I/O pin
  25. RB8 - General-purpose I/O pin
  26. RB9 - General-purpose I/O pin
  27. RB10 - General-purpose I/O pin
  28. RB11 - General-purpose I/O pin
  29. RB12 - General-purpose I/O pin
  30. RB13 - General-purpose I/O pin
  31. RB14 - General-purpose I/O pin
  32. RB15 - General-purpose I/O pin
  33. VCAP - Capacitor connection for voltage regulator
  34. VUSB - USB power supply
  35. VDD - Power supply voltage
  36. VSS - Ground
  37. RE0 - General-purpose I/O pin
  38. RE1 - General-purpose I/O pin
  39. RE2 - General-purpose I/O pin
  40. MCLR/VPP - Master Clear/Voltage Programming Pin

Functional Features

The PIC18F4423-E/P offers a range of functional features that enhance its usability and performance. Some notable features include:

  • Enhanced Flash program memory for efficient code execution
  • High-resolution Analog-to-Digital Converter (ADC) for accurate analog signal processing
  • Multiple communication interfaces (UART, SPI, I2C) for seamless integration with other devices
  • Timers and PWM modules for precise timing control
  • Interrupt handling capabilities for real-time event-driven applications

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption
  • Wide range of peripherals for versatile application development
  • Efficient code execution and high-performance architecture
  • Extensive community support and documentation available

Disadvantages

  • Limited program memory size compared to higher-end microcontrollers
  • Limited RAM size for complex data processing tasks
  • Lack of built-in Ethernet or Wi-Fi connectivity options

Working Principles

The PIC18F4423-E/P operates based on the Harvard architecture, which separates program and data memory spaces. It executes instructions fetched from the program memory and performs operations on data stored in the data memory. The microcontroller's central processing unit (CPU) controls the flow of instructions and data

기술 솔루션에 PIC18F4423-E/P 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum operating frequency of PIC18F4423-E/P?

    • The maximum operating frequency of PIC18F4423-E/P is 40 MHz.

  2. What are the key features of PIC18F4423-E/P?

    • PIC18F4423-E/P features 16 KB Flash program memory, 768 bytes of RAM, 256 bytes of EEPROM data memory, and 10-bit analog-to-digital converter.

  3. How many I/O pins does PIC18F4423-E/P have?

    • PIC18F4423-E/P has 36 I/O pins.

  4. What communication interfaces are supported by PIC18F4423-E/P?

    • PIC18F4423-E/P supports SPI, I2C, and USART communication interfaces.

  5. Can PIC18F4423-E/P be used in low-power applications?

    • Yes, PIC18F4423-E/P features multiple low-power modes, making it suitable for low-power applications.

  6. Is PIC18F4423-E/P suitable for industrial control applications?

    • Yes, PIC18F4423-E/P is well-suited for industrial control applications due to its robust features and performance.

  7. What development tools are available for programming PIC18F4423-E/P?

    • Development tools such as MPLAB X IDE and PICkit programmers can be used for programming PIC18F4423-E/P.

  8. Does PIC18F4423-E/P support external interrupts?

    • Yes, PIC18F4423-E/P supports external interrupts on its I/O pins.

  9. What are the recommended operating conditions for PIC18F4423-E/P?

    • The recommended operating voltage range for PIC18F4423-E/P is 2.0V to 5.5V, with a typical operating voltage of 3.3V.

  10. Can PIC18F4423-E/P be used in automotive electronics applications?

    • Yes, PIC18F4423-E/P is suitable for automotive electronics applications, offering reliability and performance required for such environments.