Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC18F46K20T-I/MV
자세히보기 데이터시트

PIC18F46K20T-I/MV

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics:
    • High-performance RISC CPU
    • Flash program memory
    • EEPROM data memory
    • Analog-to-Digital Converter (ADC)
    • Enhanced Capture/Compare/PWM (ECCP) module
    • Communication interfaces (UART, SPI, I2C)
  • Package: TQFP-44
  • Essence: The PIC18F46K20T-I/MV is a versatile microcontroller designed for various embedded control applications.
  • Packaging/Quantity: Available in tape and reel packaging, quantity depends on the supplier.

Specifications

  • CPU Speed: Up to 64 MHz
  • Program Memory Size: 64 KB
  • RAM Size: 3.8 KB
  • Data EEPROM Size: 256 bytes
  • ADC Resolution: 10-bit
  • Number of I/O Pins: 36
  • Operating Voltage Range: 2.0V to 5.5V
  • Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The PIC18F46K20T-I/MV microcontroller has a total of 44 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. MCLR - Master Clear input
  10. RC0 - General-purpose I/O pin
  11. RC1 - General-purpose I/O pin
  12. RC2 - General-purpose I/O pin
  13. RC3 - General-purpose I/O pin
  14. RC4 - General-purpose I/O pin
  15. RC5 - General-purpose I/O pin
  16. RC6 - General-purpose I/O pin
  17. RC7 - General-purpose I/O pin
  18. VSS - Ground
  19. OSC1/CLKI - Oscillator input
  20. OSC2/CLKO - Oscillator output
  21. RB0 - General-purpose I/O pin
  22. RB1 - General-purpose I/O pin
  23. RB2 - General-purpose I/O pin
  24. RB3 - General-purpose I/O pin
  25. RB4 - General-purpose I/O pin
  26. RB5 - General-purpose I/O pin
  27. RB6 - General-purpose I/O pin
  28. RB7 - General-purpose I/O pin
  29. VDD - Power supply voltage
  30. RD0 - General-purpose I/O pin
  31. RD1 - General-purpose I/O pin
  32. RD2 - General-purpose I/O pin
  33. RD3 - General-purpose I/O pin
  34. RD4 - General-purpose I/O pin
  35. RD5 - General-purpose I/O pin
  36. RD6 - General-purpose I/O pin
  37. RD7 - General-purpose I/O pin
  38. VSS - Ground
  39. AVDD - Analog power supply voltage
  40. AN0 - Analog input channel 0
  41. AN1 - Analog input channel 1
  42. AN2 - Analog input channel 2
  43. AN3 - Analog input channel 3
  44. AVSS - Analog ground

Functional Features

  • High-performance RISC CPU for efficient execution of instructions
  • Flash program memory for storing the application code
  • EEPROM data memory for non-volatile storage
  • Analog-to-Digital Converter (ADC) for analog signal conversion
  • Enhanced Capture/Compare/PWM (ECCP) module for advanced control applications
  • Communication interfaces such as UART, SPI, and I2C for data exchange

Advantages and Disadvantages

Advantages: - High-performance CPU allows for efficient execution of instructions - Ample program memory and data EEPROM for storing application code and data - Versatile analog-to-digital converter for precise analog signal conversion - Enhanced Capture/Compare/PWM module enables advanced control applications - Multiple communication interfaces provide flexibility in data exchange

Disadvantages: - Limited RAM size may restrict the complexity of applications - TQFP-44 package may require careful PCB layout design - Higher power consumption compared to low-power microcontrollers

Working Principles

The PIC18F46K20T-I/MV microcontroller operates based on the principles of a RISC (Reduced Instruction Set Computer) architecture. It executes instructions stored in its flash program memory to perform various tasks. The CPU fetches instructions, decodes them, and executes them sequentially. Input/output operations are performed through

기술 솔루션에 PIC18F46K20T-I/MV 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. Question: What is the maximum operating frequency of PIC18F46K20T-I/MV?
    Answer: The maximum operating frequency of PIC18F46K20T-I/MV is 64 MHz.

  2. Question: What are the key features of PIC18F46K20T-I/MV?
    Answer: Some key features of PIC18F46K20T-I/MV include 64 KB Flash program memory, 3.5 KB RAM, and 1.8V to 3.6V operating voltage range.

  3. Question: Can PIC18F46K20T-I/MV be used in battery-powered applications?
    Answer: Yes, PIC18F46K20T-I/MV's low power consumption makes it suitable for battery-powered applications.

  4. Question: What communication interfaces are supported by PIC18F46K20T-I/MV?
    Answer: PIC18F46K20T-I/MV supports SPI, I2C, and UART communication interfaces.

  5. Question: Is PIC18F46K20T-I/MV suitable for motor control applications?
    Answer: Yes, PIC18F46K20T-I/MV's enhanced PWM modules make it suitable for motor control applications.

  6. Question: Can PIC18F46K20T-I/MV be programmed using C language?
    Answer: Yes, PIC18F46K20T-I/MV can be programmed using C language with the appropriate compiler.

  7. Question: What development tools are available for PIC18F46K20T-I/MV?
    Answer: Development tools such as MPLAB X IDE and PICkit programmers are available for PIC18F46K20T-I/MV.

  8. Question: Does PIC18F46K20T-I/MV have analog-to-digital conversion capabilities?
    Answer: Yes, PIC18F46K20T-I/MV has integrated 10-bit ADC modules for analog-to-digital conversion.

  9. Question: Can PIC18F46K20T-I/MV be used in temperature sensing applications?
    Answer: Yes, PIC18F46K20T-I/MV can be used in temperature sensing applications with external temperature sensors.

  10. Question: What are the available package options for PIC18F46K20T-I/MV?
    Answer: PIC18F46K20T-I/MV is available in various package options including 44-pin QFN and 40-pin PDIP.