Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC18LF4220T-I/ML
자세히보기 데이터시트

PIC18LF4220T-I/ML

Overview

Category: Microcontroller
Use: Embedded systems, industrial automation, consumer electronics
Characteristics: Low power consumption, high performance, versatile
Package: 44-pin QFN
Essence: Advanced microcontroller with integrated peripherals
Packaging/Quantity: Tube packaging, 98 units per tube

Specifications

  • Architecture: 8-bit
  • CPU Speed: 40 MHz
  • Program Memory Size: 16 KB
  • RAM Size: 768 bytes
  • Data EEPROM Size: 256 bytes
  • Number of I/O Pins: 36
  • ADC Channels: 10
  • UART Modules: 2
  • SPI Modules: 1
  • I2C Modules: 1
  • Operating Voltage Range: 2.0V to 5.5V
  • Temperature Range: -40°C to +125°C

Pin Configuration

The PIC18LF4220T-I/ML microcontroller has a total of 44 pins. The pin configuration is as follows:

  1. VDD
  2. RA0/AN0
  3. RA1/AN1
  4. RA2/AN2/VREF-/CVREF
  5. RA3/AN3/VREF+
  6. RA4/T0CKI/C1OUT
  7. RA5/AN4/SS/C2OUT
  8. RE0/RD/AN5/CK1SPP
  9. RE1/WR/AN6/CK2SPP
  10. RE2/CS/AN7/CK3SPP
  11. VSS
  12. OSC1/CLKI
  13. OSC2/CLKO
  14. RC0/T1OSO/T1CKI
  15. RC1/T1OSI/CCP2
  16. RC2/CCP1/P1A
  17. RC3/SCK/SCL
  18. RC4/SDI/SDA
  19. RC5/SDO
  20. RC6/TX/CK
  21. RC7/RX/DT
  22. RD0/PSP0
  23. RD1/PSP1
  24. RD2/PSP2
  25. RD3/PSP3
  26. RD4/PSP4
  27. RD5/PSP5
  28. RD6/PSP6
  29. RD7/PSP7
  30. VSS
  31. RB0/INT0/FLT0
  32. RB1/INT1/FLT1
  33. RB2/INT2/FLT2
  34. RB3/INT3/FLT3
  35. RB4/KBI0/PGM
  36. RB5/KBI1/PGC
  37. RB6/KBI2/PGD
  38. RB7/KBI3/PGM
  39. VDD
  40. VSS
  41. RB8/KBI4/PGC
  42. RB9/KBI5/PGD
  43. RB10/KBI6/PGM
  44. RB11/KBI7/PGC

Functional Features

  • High-performance RISC CPU
  • Enhanced Flash program memory
  • Integrated peripherals for various applications
  • Low power consumption modes for energy efficiency
  • Multiple communication interfaces (UART, SPI, I2C)
  • Analog-to-Digital Converter (ADC) for sensor interfacing
  • Timers and PWM modules for precise timing control
  • Interrupt handling for real-time event processing
  • Wide operating voltage and temperature range

Advantages and Disadvantages

Advantages: - Versatile microcontroller suitable for a wide range of applications - High-performance CPU for efficient processing - Integrated peripherals reduce external component count - Low power consumption extends battery life - Ample program and data memory for complex tasks

Disadvantages: - Limited RAM size may restrict the complexity of programs - 8-bit architecture may not be sufficient for certain demanding applications - Availability of alternative models with more features or higher performance

Working Principles

The PIC18LF4220T-I/ML microcontroller operates based on the principles of a RISC (Reduced Instruction Set Computer) architecture. It executes instructions stored in its Flash program memory to perform various tasks. The integrated peripherals, such as UART, SPI, I2C, ADC, timers, and PWM modules, enable communication, data acquisition, and precise timing control.

The microcontroller can be programmed using high-level languages like C or assembly language. It responds to external events through interrupts, allowing real-time event handling. Its low power consumption modes make it suitable for battery-powered devices.

Application Field Plans

The PIC18LF4220T-I/ML microcontroller finds

기술 솔루션에 PIC18LF4220T-I/ML 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum operating frequency of PIC18LF4220T-I/ML?
    - The maximum operating frequency of PIC18LF4220T-I/ML is 40 MHz.

  2. What are the key features of PIC18LF4220T-I/ML?
    - Some key features of PIC18LF4220T-I/ML include 16KB Flash program memory, 256 bytes of EEPROM data memory, and 256 bytes of SRAM.

  3. Can PIC18LF4220T-I/ML be used in battery-powered applications?
    - Yes, PIC18LF4220T-I/ML is suitable for battery-powered applications due to its low power consumption features.

  4. What communication interfaces are supported by PIC18LF4220T-I/ML?
    - PIC18LF4220T-I/ML supports SPI, I2C, and UART communication interfaces.

  5. Is PIC18LF4220T-I/ML suitable for industrial control applications?
    - Yes, PIC18LF4220T-I/ML is well-suited for industrial control applications due to its robust design and wide operating temperature range.

  6. What development tools are available for programming PIC18LF4220T-I/ML?
    - Development tools such as MPLAB X IDE and PICkit programmers can be used for programming PIC18LF4220T-I/ML.

  7. Can PIC18LF4220T-I/ML be used in automotive electronics?
    - Yes, PIC18LF4220T-I/ML is suitable for automotive electronics applications due to its high temperature operation and robust design.

  8. What are the available package options for PIC18LF4220T-I/ML?
    - PIC18LF4220T-I/ML is available in a 28-pin QFN package.

  9. Does PIC18LF4220T-I/ML have built-in analog-to-digital converters (ADC)?
    - Yes, PIC18LF4220T-I/ML features built-in 10-bit ADC modules.

  10. Can PIC18LF4220T-I/ML be used in medical device applications?
    - Yes, PIC18LF4220T-I/ML can be used in medical device applications due to its reliability and low power consumption.