Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC24F08KA101-I/P
자세히보기 데이터시트

PIC24F08KA101-I/P

Product Overview

Category

The PIC24F08KA101-I/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 16-bit architecture
  • Low power consumption
  • Wide operating voltage range
  • Integrated peripherals for enhanced functionality
  • Ample program and data memory
  • Flexible input/output options

Package

The PIC24F08KA101-I/P is available in a 20-pin plastic dual inline package (DIP).

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities in a compact form factor.

Packaging/Quantity

The PIC24F08KA101-I/P is typically packaged in reels or tubes, with each containing a specific quantity of microcontrollers. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Microcontroller Family: PIC24F
  • Core Size: 16-bit
  • CPU Speed: Up to 16 MIPS
  • Program Memory Size: 8 KB
  • RAM Size: 512 bytes
  • Number of I/O Pins: 18
  • Operating Voltage Range: 2.0V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC) Resolution: 10-bit
  • Timers/Counters: 4
  • PWM Channels: 2
  • Package Type: DIP
  • Package Dimensions: 9.81mm x 6.35mm x 3.30mm

Detailed Pin Configuration

The PIC24F08KA101-I/P has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0/AN0 - Analog input or digital I/O
  3. RA1/AN1 - Analog input or digital I/O
  4. RA2/AN2 - Analog input or digital I/O
  5. RA3/AN3 - Analog input or digital I/O
  6. RA4/T0CKI/C1OUT - Timer0 clock input or digital I/O
  7. RA5/AN4 - Analog input or digital I/O
  8. VSS - Ground
  9. RB0/INT0/FLT0 - External interrupt or digital I/O
  10. RB1/INT1/SDI1 - External interrupt or SPI data input
  11. RB2/INT2/SDO1 - External interrupt or SPI data output
  12. RB3/INT3/SDA1 - External interrupt or I2C data
  13. RB4/KBI0/PGM - Keyboard interrupt or programming mode
  14. RB5/KBI1/PGC - Keyboard interrupt or programming clock
  15. RB6/KBI2/PGD - Keyboard interrupt or programming data
  16. RB7/KBI3/PGM - Keyboard interrupt or programming mode
  17. RB8/KBI4/PGC - Keyboard interrupt or programming clock
  18. RB9/KBI5/PGD - Keyboard interrupt or programming data
  19. MCLR/VPP - Master clear or programming voltage
  20. VSS - Ground

Functional Features

The PIC24F08KA101-I/P offers a range of functional features that enhance its usability and performance. Some notable features include:

  • High-speed processing capabilities
  • Multiple communication interfaces for seamless integration with other devices
  • Integrated analog-to-digital converter for precise measurement and control
  • Timers and counters for accurate timing and event management
  • PWM channels for generating analog output signals
  • Low power consumption modes for energy efficiency
  • Flexible input/output options for versatile connectivity

Advantages and Disadvantages

Advantages

  • High-performance 16-bit architecture enables efficient processing.
  • Integrated peripherals reduce the need for external components, saving cost and board space.
  • Wide operating voltage range allows for compatibility with various power sources.
  • Ample program and data memory provide sufficient storage capacity for most applications.
  • Flexible input/output options facilitate easy interfacing with other devices.

Disadvantages

  • Limited number of I/O pins may restrict the complexity of certain applications.
  • Lack of built-in wireless communication capabilities may require additional components for wireless connectivity.

Working Principles

The PIC24F08KA101-I/P operates based on the principles of microcontroller architecture. It executes instructions stored in its program memory to perform specific tasks. The central processing unit (CPU) fetches instructions, decodes them, and executes the corresponding operations. Input and output operations are facilitated through the I/O pins, allowing the microcontroller to interact with external devices.

Detailed Application

기술 솔루션에 PIC24F08KA101-I/P 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum operating frequency of PIC24F08KA101-I/P?
    - The maximum operating frequency of PIC24F08KA101-I/P is 16 MHz.

  2. What are the key features of PIC24F08KA101-I/P?
    - Some key features of PIC24F08KA101-I/P include 8 KB of program memory, 512 bytes of RAM, and multiple communication interfaces.

  3. Can PIC24F08KA101-I/P be used in battery-powered applications?
    - Yes, PIC24F08KA101-I/P is suitable for battery-powered applications due to its low power consumption.

  4. Does PIC24F08KA101-I/P support analog-to-digital conversion?
    - Yes, PIC24F08KA101-I/P has a built-in 10-bit analog-to-digital converter (ADC) with multiple channels.

  5. What development tools are available for programming PIC24F08KA101-I/P?
    - Development tools such as MPLAB X IDE and MPLAB XC16 Compiler can be used for programming PIC24F08KA101-I/P.

  6. Is PIC24F08KA101-I/P compatible with other microcontrollers or peripherals?
    - Yes, PIC24F08KA101-I/P is compatible with various microcontroller families and peripheral devices.

  7. Can PIC24F08KA101-I/P be used in industrial control applications?
    - Yes, PIC24F08KA101-I/P is suitable for industrial control applications due to its robust features and performance.

  8. What communication protocols does PIC24F08KA101-I/P support?
    - PIC24F08KA101-I/P supports communication protocols such as SPI, I2C, and UART for interfacing with other devices.

  9. Are there any application notes or reference designs available for PIC24F08KA101-I/P?
    - Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC24F08KA101-I/P in various applications.

  10. What are the recommended operating conditions for PIC24F08KA101-I/P?
    - The recommended operating voltage range for PIC24F08KA101-I/P is 2.0V to 3.6V, and the temperature range is -40°C to 85°C.