PIC24F16KA101T-I/MQ

Product Overview

Category

The PIC24F16KA101T-I/MQ belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for control and processing purposes.

Characteristics

• High-performance 16-bit architecture
• Low power consumption
• Integrated peripherals for enhanced functionality
• Wide operating voltage range
• Compact size

Package

The PIC24F16KA101T-I/MQ is available in a small form factor package, suitable for surface mount technology (SMT) applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact and low-power package.

Packaging/Quantity

The PIC24F16KA101T-I/MQ is typically packaged in reels or tubes, with a quantity of several hundred units per package.

Specifications

• Architecture: 16-bit
• Flash Memory: 16 KB
• RAM: 1 KB
• Operating Voltage Range: 2.0V to 3.6V
• Maximum Clock Speed: 32 MHz
• Number of I/O Pins: 28
• Communication Interfaces: UART, SPI, I2C
• Analog-to-Digital Converter (ADC): 10-bit, 12 channels
• Timers: Multiple timers/counters
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC24F16KA101T-I/MQ microcontroller has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

• Pin 1: VDD - Power supply voltage
• Pin 2: VSS - Ground
• Pin 3: RA0 - General-purpose I/O pin
• Pin 4: RA1 - General-purpose I/O pin
• Pin 5: RA2 - General-purpose I/O pin
• Pin 6: RA3 - General-purpose I/O pin
• Pin 7: RA4 - General-purpose I/O pin
• Pin 8: RA5 - General-purpose I/O pin
• Pin 9: MCLR - Master Clear input
• Pin 10: VCAP - Capacitor connection for internal voltage regulator
• Pin 11: RB0 - General-purpose I/O pin
• Pin 12: RB1 - General-purpose I/O pin
• Pin 13: RB2 - General-purpose I/O pin
• Pin 14: RB3 - General-purpose I/O pin
• Pin 15: RB4 - General-purpose I/O pin
• Pin 16: RB5 - General-purpose I/O pin
• Pin 17: RB6 - General-purpose I/O pin
• Pin 18: RB7 - General-purpose I/O pin
• Pin 19: VSS - Ground
• Pin 20: OSC1 - Oscillator input
• Pin 21: OSC2 - Oscillator output
• Pin 22: RC0 - General-purpose I/O pin
• Pin 23: RC1 - General-purpose I/O pin
• Pin 24: RC2 - General-purpose I/O pin
• Pin 25: RC3 - General-purpose I/O pin
• Pin 26: RC4 - General-purpose I/O pin
• Pin 27: RC5 - General-purpose I/O pin
• Pin 28: VDD - Power supply voltage

Functional Features

The PIC24F16KA101T-I/MQ microcontroller offers a range of functional features, including:

• High-performance processing capabilities
• Integrated peripherals such as UART, SPI, and I2C for communication
• Analog-to-Digital Converter (ADC) for precise analog signal measurement
• Timers/counters for accurate timing and event management
• Low power consumption for energy-efficient operation
• Wide operating voltage range for flexibility in various applications

Advantages and Disadvantages

Advantages

• High-performance 16-bit architecture enables efficient processing.
• Integrated peripherals enhance functionality and reduce external component count.
• Low power consumption extends battery life in portable devices.
• Compact size allows for space-saving designs.
• Wide operating voltage range accommodates different power supply configurations.

Disadvantages

• Limited flash memory and RAM capacity may restrict the complexity of applications.
• The number of I/O pins may be insufficient for certain projects requiring extensive interfacing.

Working Principles

The PIC24F16KA101T-I/MQ microcontroller operates based on the principles of digital logic and embedded systems. It executes instructions stored in its flash memory to perform specific tasks, such as data processing, control operations, and communication with external devices. The microcontroller's integrated peripherals and I/O pins enable it to interact with the surrounding environment and interface with other electronic components.

Detailed Application Field Plans