Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC24FJ128GA202-E/SS
자세히보기 데이터시트

PIC24FJ128GA202-E/SS

Product Overview

Category

The PIC24FJ128GA202-E/SS belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for control and processing purposes.

Characteristics

  • High-performance 16-bit architecture
  • Flash memory for program storage
  • Integrated peripherals for enhanced functionality
  • Low power consumption
  • Wide operating voltage range
  • Robust communication interfaces
  • Extensive development tools and support

Package

The PIC24FJ128GA202-E/SS is available in a SSOP package, which stands for Shrink Small Outline Package. This package offers compact size and ease of integration into circuit boards.

Essence

The essence of the PIC24FJ128GA202-E/SS lies in its ability to provide efficient and reliable control and processing capabilities in a wide range of applications.

Packaging/Quantity

The PIC24FJ128GA202-E/SS is typically packaged in reels or tubes, with a quantity of 1000 units per package.

Specifications

  • Microcontroller core: 16-bit PIC24F
  • Flash memory: 128 KB
  • RAM: 8 KB
  • Operating voltage: 2.0V to 3.6V
  • Maximum CPU speed: 32 MHz
  • Number of I/O pins: 28
  • Communication interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 16 channels
  • Timers: Multiple timers/counters with various modes
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The PIC24FJ128GA202-E/SS has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. RB0 - General-purpose I/O pin
  10. RB1 - General-purpose I/O pin
  11. RB2 - General-purpose I/O pin
  12. RB3 - General-purpose I/O pin
  13. RB4 - General-purpose I/O pin
  14. RB5 - General-purpose I/O pin
  15. RB6 - General-purpose I/O pin
  16. RB7 - General-purpose I/O pin
  17. RB8 - General-purpose I/O pin
  18. RB9 - General-purpose I/O pin
  19. RB10 - General-purpose I/O pin
  20. RB11 - General-purpose I/O pin
  21. RB12 - General-purpose I/O pin
  22. RB13 - General-purpose I/O pin
  23. RB14 - General-purpose I/O pin
  24. RB15 - General-purpose I/O pin
  25. VCAP - Capacitor connection for internal voltage regulator
  26. VUSB - USB power supply
  27. AVSS - Analog ground
  28. AVDD - Analog power supply

Functional Features

The PIC24FJ128GA202-E/SS offers a range of functional features that enhance its usability and performance:

  • High-speed processing capabilities
  • Flash memory for program storage and flexibility in firmware updates
  • Integrated peripherals such as UART, SPI, and I2C for communication purposes
  • Analog-to-Digital Converter (ADC) for precise analog signal measurements
  • Timers/counters for accurate timing and event management
  • Low power consumption modes for energy-efficient operation
  • Robust communication interfaces for seamless integration with other devices
  • Extensive development tools and support from the manufacturer

Advantages and Disadvantages

Advantages

  • High-performance 16-bit architecture provides efficient processing capabilities
  • Flash memory allows for flexible firmware updates
  • Integrated peripherals simplify system design and reduce external component count
  • Wide operating voltage range enables compatibility with various power sources
  • Low power consumption extends battery life in portable applications
  • Robust communication interfaces facilitate seamless data exchange
  • Extensive development tools and support ensure ease of use and quick time-to-market

Disadvantages

  • Limited number of I/O pins may restrict the complexity of certain applications
  • Higher cost compared to lower-end microcontrollers with similar specifications
  • Steeper learning curve for beginners due to the advanced features and architecture

Working Principles

The PIC24FJ128GA202-E/SS operates based on the principles of a microcontroller. It executes instructions stored in its flash memory, processes data, and controls various peripherals and I/O pins according to the program logic. The microcontroller interacts with

기술 솔루션에 PIC24FJ128GA202-E/SS 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. Question: What are the key features of PIC24FJ128GA202-E/SS?
    Answer: The PIC24FJ128GA202-E/SS features 16-bit microcontroller architecture, up to 128 KB flash program memory, and various communication interfaces.

  2. Question: How can I interface sensors with PIC24FJ128GA202-E/SS?
    Answer: You can interface sensors with PIC24FJ128GA202-E/SS using its built-in analog-to-digital converter (ADC) and various communication protocols.

  3. Question: What development tools are available for programming PIC24FJ128GA202-E/SS?
    Answer: Development tools such as MPLAB X IDE and MPLAB XC16 Compiler are commonly used for programming PIC24FJ128GA202-E/SS.

  4. Question: Can PIC24FJ128GA202-E/SS be used in battery-powered applications?
    Answer: Yes, PIC24FJ128GA202-E/SS is suitable for battery-powered applications due to its low power consumption features.

  5. Question: What communication interfaces are supported by PIC24FJ128GA202-E/SS?
    Answer: PIC24FJ128GA202-E/SS supports interfaces such as UART, SPI, I2C, and USB for communication with other devices.

  6. Question: Is it possible to implement real-time control using PIC24FJ128GA202-E/SS?
    Answer: Yes, PIC24FJ128GA202-E/SS is capable of real-time control applications due to its high-performance core and peripherals.

  7. Question: How can I debug my code running on PIC24FJ128GA202-E/SS?
    Answer: Debugging can be done using in-circuit debugging tools like MPLAB REAL ICE or MPLAB ICD 3.

  8. Question: What are the temperature operating ranges for PIC24FJ128GA202-E/SS?
    Answer: PIC24FJ128GA202-E/SS operates within a temperature range of -40°C to 125°C.

  9. Question: Can PIC24FJ128GA202-E/SS be used in industrial automation applications?
    Answer: Yes, PIC24FJ128GA202-E/SS is suitable for industrial automation applications due to its robust features and communication capabilities.

  10. Question: Are there any application notes or reference designs available for PIC24FJ128GA202-E/SS?
    Answer: Yes, Microchip provides application notes and reference designs to help users implement PIC24FJ128GA202-E/SS in various technical solutions.