PIC24FJ64GA006-I/PT

Product Overview

Category

The PIC24FJ64GA006-I/PT belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

• High-performance 16-bit architecture
• Flash program memory
• Low power consumption
• Wide operating voltage range
• Integrated peripherals for enhanced functionality

Package

The PIC24FJ64GA006-I/PT is available in a small form factor package, known as TQFP (Thin Quad Flat Pack).

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact package.

Packaging/Quantity

The PIC24FJ64GA006-I/PT is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

• Microcontroller Family: PIC24F
• Core Size: 16-bit
• Program Memory Size: 64 KB
• RAM Size: 8 KB
• Number of I/O Pins: 35
• Operating Voltage Range: 2.0V to 3.6V
• Maximum Speed: 32 MHz
• Data Bus Width: 16-bit
• ADC Resolution: 10-bit
• Communication Interfaces: UART, SPI, I2C, USB

Detailed Pin Configuration

The PIC24FJ64GA006-I/PT has a total of 35 pins, each serving a specific purpose. The pin configuration is as follows:

1. VDD - Power supply voltage
2. VSS - Ground
3. RA0 - General-purpose I/O pin
4. RA1 - General-purpose I/O pin
5. RA2 - General-purpose I/O pin
6. RA3 - General-purpose I/O pin
7. RA4 - General-purpose I/O pin
8. RA5 - General-purpose I/O pin
9. RB0 - General-purpose I/O pin
10. RB1 - General-purpose I/O pin
11. RB2 - General-purpose I/O pin
12. RB3 - General-purpose I/O pin
13. RB4 - General-purpose I/O pin
14. RB5 - General-purpose I/O pin
15. RB6 - General-purpose I/O pin
16. RB7 - General-purpose I/O pin
17. RB8 - General-purpose I/O pin
18. RB9 - General-purpose I/O pin
19. RB10 - General-purpose I/O pin
20. RB11 - General-purpose I/O pin
21. RB12 - General-purpose I/O pin
22. RB13 - General-purpose I/O pin
23. RB14 - General-purpose I/O pin
24. RB15 - General-purpose I/O pin
25. VCAP - Capacitor connection for internal voltage regulator
26. VUSB - USB power supply
27. AVSS - Analog ground
28. AVDD - Analog power supply
29. AN0 - Analog input channel 0
30. AN1 - Analog input channel 1
31. AN2 - Analog input channel 2
32. AN3 - Analog input channel 3
33. MCLR - Master Clear (Reset) input
34. VREF+ - Positive reference voltage for ADC
35. VREF- - Negative reference voltage for ADC

Functional Features

The PIC24FJ64GA006-I/PT offers several functional features that enhance its capabilities:

• High-performance CPU with efficient instruction set
• Flash program memory for storing user code
• Integrated peripherals such as UART, SPI, I2C, and USB for communication
• Analog-to-Digital Converter (ADC) for precise analog measurements
• Timers and PWM modules for accurate timing and control
• Interrupt handling for real-time event processing
• Low-power modes for energy-efficient operation

Advantages and Disadvantages

Advantages

• High-performance 16-bit architecture enables efficient data processing.
• Flash program memory allows for easy reprogramming of the microcontroller.
• Integrated peripherals provide enhanced functionality without the need for external components.
• Low power consumption extends battery life in portable devices.
• Wide operating voltage range ensures compatibility with various power sources.

Disadvantages

• Limited program memory size may restrict the complexity of applications.
• The number of I/O pins may be insufficient for certain projects requiring extensive interfacing.
• Lack of built-in Ethernet or Wi-Fi connectivity limits networking capabilities.

Working Principles

The PIC24FJ64GA006-I/PT operates based on the principles of a microcontroller. It executes instructions stored in its program memory to perform specific tasks. The CPU fetches instructions, decodes them, and executes the corresponding operations. Input/output operations are handled through the I/O pins, allowing communication