PIC32MM0064GPM028T-I/SS

Product Overview

• Category: Microcontroller
• Use: Embedded systems, Internet of Things (IoT) devices, consumer electronics
• Characteristics: Low power consumption, high performance, small form factor
• Package: SSOP (Shrink Small Outline Package)
• Essence: A powerful microcontroller designed for various applications requiring low power and high performance.
• Packaging/Quantity: Available in tape and reel packaging, quantity depends on the supplier.

Specifications

• Processor Core: MIPS32® M4K® Core
• Clock Speed: Up to 50 MHz
• Flash Memory: 64 KB
• RAM: 8 KB
• Operating Voltage: 2.3V - 3.6V
• Digital I/O Pins: 28
• Analog Input Channels: 5
• Communication Interfaces: UART, SPI, I2C, USB
• Timers: 4 x 16-bit, 1 x 32-bit
• ADC Resolution: 10-bit
• PWM Channels: 4
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC32MM0064GPM028T-I/SS microcontroller has a total of 28 pins. The pin configuration is as follows:

• Pin 1: VDD (Power Supply)
• Pin 2: RA0 (General Purpose I/O)
• Pin 3: RA1 (General Purpose I/O)
• Pin 4: RA2 (General Purpose I/O)
• Pin 5: RA3 (General Purpose I/O)
• Pin 6: RA4 (General Purpose I/O)
• Pin 7: RA5 (General Purpose I/O)
• Pin 8: VSS (Ground)
• Pin 9: RB0 (General Purpose I/O)
• Pin 10: RB1 (General Purpose I/O)
• Pin 11: RB2 (General Purpose I/O)
• Pin 12: RB3 (General Purpose I/O)
• Pin 13: RB4 (General Purpose I/O)
• Pin 14: RB5 (General Purpose I/O)
• Pin 15: RB6 (General Purpose I/O)
• Pin 16: RB7 (General Purpose I/O)
• Pin 17: VDD (Power Supply)
• Pin 18: RC0 (General Purpose I/O)
• Pin 19: RC1 (General Purpose I/O)
• Pin 20: RC2 (General Purpose I/O)
• Pin 21: RC3 (General Purpose I/O)
• Pin 22: RC4 (General Purpose I/O)
• Pin 23: RC5 (General Purpose I/O)
• Pin 24: RC6 (General Purpose I/O)
• Pin 25: RC7 (General Purpose I/O)
• Pin 26: VSS (Ground)
• Pin 27: OSC1 (Oscillator Input)
• Pin 28: OSC2 (Oscillator Output)

Functional Features

• Low power consumption allows for extended battery life in portable devices.
• High-performance MIPS32® M4K® Core enables efficient execution of complex tasks.
• Multiple communication interfaces (UART, SPI, I2C, USB) facilitate connectivity with other devices.
• Integrated analog-to-digital converter (ADC) enables precise measurement of analog signals.
• Flexible digital I/O pins provide versatility for various applications.
• Timers and PWM channels allow for accurate timing and control.

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life. - High-performance processor core enables efficient execution of tasks. - Versatile digital I/O pins provide flexibility for different applications. - Integrated analog-to-digital converter simplifies analog signal measurement.

Disadvantages: - Limited flash memory and RAM compared to higher-end microcontrollers. - Limited number of I/O pins may restrict the number of peripherals that can be connected simultaneously.

Working Principles

The PIC32MM0064GPM028T-I/SS microcontroller operates based on the MIPS32® M4K® Core architecture. It executes instructions stored in its flash memory, processes data, and controls various peripherals and interfaces. The low power consumption is achieved through efficient power management techniques, allowing the microcontroller to operate for extended periods on battery power.

Detailed Application Field Plans

The PIC32MM0064GPM028T-I/SS microcontroller is suitable for a wide range of applications, including but not limited to:

1. Internet of Things (IoT) devices: Enables connectivity and control in smart home systems, industrial automation, and environmental monitoring.
2. Consumer electronics: Powers portable devices such as wearables, remote controls, and small appliances.
3. Embedded systems: Used in automotive electronics, medical devices, and industrial control systems.

Detailed and Complete Alternative