Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PIC32MX230F256D-50I/TL
자세히보기 데이터시트

PIC32MX230F256D-50I/TL

Product Overview

Category

The PIC32MX230F256D-50I/TL belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 32-bit microcontroller
  • Low power consumption
  • Large memory capacity
  • Integrated peripherals for enhanced functionality
  • Wide operating voltage range

Package

The PIC32MX230F256D-50I/TL is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for electronic devices.

Packaging/Quantity

The PIC32MX230F256D-50I/TL is typically packaged in reels or trays, with a quantity of several hundred units per package.

Specifications

  • Microcontroller core: MIPS32® M4K® Core
  • Clock speed: 50 MHz
  • Flash memory: 256 KB
  • RAM: 32 KB
  • Operating voltage: 2.3V - 3.6V
  • Digital I/O pins: 35
  • Analog input channels: 12
  • Communication interfaces: UART, SPI, I2C, USB

Detailed Pin Configuration

The PIC32MX230F256D-50I/TL has a total of 44 pins, each serving a specific purpose. The pin configuration is as follows:

  • Pin 1: VDD (Power supply)
  • Pin 2: VSS (Ground)
  • Pin 3: RA0 (General-purpose I/O)
  • Pin 4: RA1 (General-purpose I/O)
  • ...
  • Pin 44: RB15 (General-purpose I/O)

Functional Features

  • High-speed processing capabilities
  • Rich set of integrated peripherals for various applications
  • Flexible I/O options for interfacing with external devices
  • Extensive memory capacity for storing program code and data
  • Low power consumption for energy-efficient operation

Advantages and Disadvantages

Advantages

  • Powerful processing capabilities suitable for demanding applications
  • Wide range of communication interfaces for seamless connectivity
  • Ample memory capacity for storing complex programs
  • Low power consumption for extended battery life

Disadvantages

  • Relatively higher cost compared to lower-end microcontrollers
  • Steeper learning curve for beginners due to its advanced features

Working Principles

The PIC32MX230F256D-50I/TL operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its memory, interacts with external devices through its I/O pins, and performs calculations and data processing tasks.

Detailed Application Field Plans

The PIC32MX230F256D-50I/TL finds applications in various fields, including but not limited to: - Industrial automation - Consumer electronics - Automotive systems - Medical devices - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

  • PIC32MX230F256D-50I/PT
  • PIC32MX230F256D-50I/ML
  • PIC32MX230F256D-50I/PTG
  • PIC32MX230F256D-50I/PTL

These alternative models offer similar functionality and performance characteristics, providing flexibility in choosing the most suitable microcontroller for specific applications.

In conclusion, the PIC32MX230F256D-50I/TL is a high-performance microcontroller with a wide range of applications. Its powerful features, extensive memory capacity, and flexible I/O options make it an ideal choice for various electronic devices and embedded systems.

기술 솔루션에 PIC32MX230F256D-50I/TL 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. Question: What is the maximum operating frequency of PIC32MX230F256D-50I/TL?
    Answer: The maximum operating frequency of PIC32MX230F256D-50I/TL is 50 MHz.

  2. Question: What are the key features of PIC32MX230F256D-50I/TL?
    Answer: PIC32MX230F256D-50I/TL features 256 KB of Flash memory, 32 KB of RAM, USB, and multiple communication interfaces.

  3. Question: Can PIC32MX230F256D-50I/TL be used for real-time embedded systems?
    Answer: Yes, PIC32MX230F256D-50I/TL is suitable for real-time embedded systems due to its high performance and peripheral integration.

  4. Question: What development tools are available for programming PIC32MX230F256D-50I/TL?
    Answer: Development tools such as MPLAB X IDE and MPLAB Harmony framework can be used for programming PIC32MX230F256D-50I/TL.

  5. Question: Does PIC32MX230F256D-50I/TL support low-power operation?
    Answer: Yes, PIC32MX230F256D-50I/TL supports low-power operation through various power-saving modes.

  6. Question: What communication interfaces are supported by PIC32MX230F256D-50I/TL?
    Answer: PIC32MX230F256D-50I/TL supports SPI, I2C, UART, and USB communication interfaces.

  7. Question: Is PIC32MX230F256D-50I/TL suitable for industrial control applications?
    Answer: Yes, PIC32MX230F256D-50I/TL is suitable for industrial control applications due to its robust features and performance.

  8. Question: Can PIC32MX230F256D-50I/TL be used in automotive electronics?
    Answer: Yes, PIC32MX230F256D-50I/TL is suitable for automotive electronics applications with proper design considerations.

  9. Question: What are the security features of PIC32MX230F256D-50I/TL?
    Answer: PIC32MX230F256D-50I/TL offers security features such as code protection and secure boot capabilities.

  10. Question: Are there any application notes or reference designs available for PIC32MX230F256D-50I/TL?
    Answer: Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC32MX230F256D-50I/TL in technical solutions.