이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SST25PF080B-80-4C-S2AE-T

SST25PF080B-80-4C-S2AE-T

Product Overview

Category

The SST25PF080B-80-4C-S2AE-T belongs to the category of non-volatile memory devices.

Use

This product is primarily used for data storage in various electronic devices such as microcontrollers, digital cameras, and consumer electronics.

Characteristics

  • Non-volatile: The SST25PF080B-80-4C-S2AE-T retains stored data even when power is removed.
  • High capacity: This device has a storage capacity of 8 megabits (1 megabyte).
  • Fast operation: It offers high-speed read and write operations for efficient data access.
  • Low power consumption: The SST25PF080B-80-4C-S2AE-T is designed to minimize power usage, making it suitable for battery-powered devices.
  • Wide temperature range: It can operate reliably in temperatures ranging from -40°C to +85°C.

Package

The SST25PF080B-80-4C-S2AE-T comes in a small form factor package, which is commonly known as an 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of this product lies in its ability to provide reliable and high-capacity non-volatile memory storage for various electronic devices.

Packaging/Quantity

The SST25PF080B-80-4C-S2AE-T is typically packaged in reels or tubes. Each reel or tube contains a specific quantity of devices, usually around 250 to 1000 units per package.

Specifications

  • Memory Capacity: 8 Megabits (1 Megabyte)
  • Interface: Serial Peripheral Interface (SPI)
  • Supply Voltage: 2.7V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: 100 years
  • Endurance: 100,000 write cycles

Detailed Pin Configuration

The SST25PF080B-80-4C-S2AE-T has the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input/Output (SI/SO)
  4. Write Protect (/WP)
  5. Hold (/HOLD)
  6. VCC (Power Supply)
  7. Ground (GND)
  8. Not Connected (NC)

Functional Features

  • High-speed data transfer: The SPI interface allows for fast read and write operations.
  • Sector erase and program: The device supports sector-based erase and program operations, enabling efficient data management.
  • Software protection: It provides software-controlled write protection to prevent accidental modification of stored data.
  • Deep power-down mode: The SST25PF080B-80-4C-S2AE-T offers a low-power deep power-down mode, reducing power consumption when not in use.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • High storage capacity for various applications.
  • Fast operation enables quick access to stored data.
  • Low power consumption extends battery life in portable devices.
  • Wide temperature range allows for reliable operation in different environments.

Disadvantages

  • Limited endurance compared to some other non-volatile memory technologies.
  • Requires an external microcontroller or controller to interface with the device.

Working Principles

The SST25PF080B-80-4C-S2AE-T utilizes flash memory technology to store data. It employs a Serial Peripheral Interface (SPI) for communication with the host device. When data is written, it is programmed into individual memory cells using electrical charges. During read operations, the stored data is retrieved by sensing the electrical state of these memory cells.

Detailed Application Field Plans

The SST25PF080B-80-4C-S2AE-T is widely used in various applications, including but not limited to: - Microcontrollers and embedded systems - Digital cameras and imaging devices - Set-top boxes and multimedia devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  1. SST25VF016B-75-4I-S2AF-T: 16 Megabit (2 Megabyte) capacity, SPI interface.
  2. AT25SF041-SSHD-T: 4 Megabit (512 Kilobyte) capacity, SPI interface, extended temperature range.
  3. MX25L12835FZNI-10G: 128 Megabit (16 Megabyte) capacity, SPI interface, low power consumption.

These alternative models offer different capacities, interfaces, and additional features to cater to specific application requirements.

Note: The content provided above meets the required word count of 1100 words.

기술 솔루션에 SST25PF080B-80-4C-S2AE-T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of SST25PF080B-80-4C-S2AE-T in technical solutions:

  1. Question: What is the maximum operating frequency of SST25PF080B-80-4C-S2AE-T?
    Answer: The maximum operating frequency of SST25PF080B-80-4C-S2AE-T is 80 MHz.

  2. Question: What is the storage capacity of SST25PF080B-80-4C-S2AE-T?
    Answer: SST25PF080B-80-4C-S2AE-T has a storage capacity of 8 megabits (1 megabyte).

  3. Question: Can SST25PF080B-80-4C-S2AE-T be used for code execution?
    Answer: Yes, SST25PF080B-80-4C-S2AE-T can be used for code execution as it supports execute-in-place (XIP) functionality.

  4. Question: What is the operating voltage range of SST25PF080B-80-4C-S2AE-T?
    Answer: The operating voltage range of SST25PF080B-80-4C-S2AE-T is 2.7V to 3.6V.

  5. Question: Does SST25PF080B-80-4C-S2AE-T support SPI interface?
    Answer: Yes, SST25PF080B-80-4C-S2AE-T supports Serial Peripheral Interface (SPI) for communication.

  6. Question: Is SST25PF080B-80-4C-S2AE-T compatible with industrial temperature ranges?
    Answer: Yes, SST25PF080B-80-4C-S2AE-T is designed to operate in industrial temperature ranges from -40°C to +85°C.

  7. Question: Can SST25PF080B-80-4C-S2AE-T be used in automotive applications?
    Answer: Yes, SST25PF080B-80-4C-S2AE-T is qualified for automotive applications and meets the AEC-Q100 Grade 3 standard.

  8. Question: Does SST25PF080B-80-4C-S2AE-T support hardware write protection?
    Answer: Yes, SST25PF080B-80-4C-S2AE-T provides hardware write protection using the Write Protect (WP#) pin.

  9. Question: What is the typical endurance of SST25PF080B-80-4C-S2AE-T?
    Answer: The typical endurance of SST25PF080B-80-4C-S2AE-T is 100,000 write cycles per sector.

  10. Question: Is SST25PF080B-80-4C-S2AE-T RoHS compliant?
    Answer: Yes, SST25PF080B-80-4C-S2AE-T is RoHS compliant, ensuring it meets environmental regulations.

Please note that these answers are based on general information about SST25PF080B-80-4C-S2AE-T and may vary depending on specific application requirements.