Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SST25VF016B-75-4I-S2AF
자세히보기 데이터시트

SST25VF016B-75-4I-S2AF

Product Overview

Category

The SST25VF016B-75-4I-S2AF belongs to the category of Serial Flash Memory.

Use

This product is primarily used for storing and retrieving digital data in electronic devices such as microcontrollers, embedded systems, and consumer electronics.

Characteristics

  • High-speed data transfer rate
  • Non-volatile memory
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Package

The SST25VF016B-75-4I-S2AF is available in a small form factor package, making it suitable for space-constrained applications. It is commonly found in an 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of the SST25VF016B-75-4I-S2AF lies in its ability to provide reliable and fast non-volatile memory storage for various electronic devices.

Packaging/Quantity

This product is typically sold in reels or tubes containing multiple units. The exact quantity may vary depending on the supplier and customer requirements.

Specifications

  • Memory Capacity: 16 Megabits (2 Megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage Range: 2.7V to 3.6V
  • Data Transfer Rate: Up to 75 MHz
  • Erase/Program Cycle Endurance: 100,000 cycles
  • Data Retention: Up to 20 years
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input/Output (SI/SO)
  4. Write Protect (/WP)
  5. Hold (/HOLD)
  6. VCC (Power Supply)
  7. Ground (GND)
  8. Not Connected (NC)

Functional Features

  • High-speed data transfer: The SST25VF016B-75-4I-S2AF supports a fast data transfer rate of up to 75 MHz, enabling quick read and write operations.
  • Non-volatile memory: The data stored in this flash memory is retained even when power is disconnected, ensuring data integrity.
  • Low power consumption: The product is designed to consume minimal power during both active and standby modes, making it suitable for battery-powered devices.
  • Flexible erase and program options: The flash memory can be erased and programmed at the sector or block level, providing flexibility in managing data storage.
  • Hardware and software protection features: The chip select (/CS) pin, write protect (/WP) pin, and hold (/HOLD) pin allow for hardware-based protection against accidental writes or erases. Additionally, software commands can be used to protect specific memory regions.

Advantages and Disadvantages

Advantages

  • High-speed data transfer enables efficient data handling.
  • Non-volatile memory ensures data retention even during power loss.
  • Low power consumption prolongs battery life in portable devices.
  • Compact size allows for integration into space-constrained designs.
  • Flexible erase and program options provide versatility in data management.

Disadvantages

  • Limited storage capacity compared to higher-capacity flash memory options.
  • Relatively higher cost per unit compared to lower-capacity alternatives.
  • Requires proper handling and precautions to prevent damage from electrostatic discharge (ESD).

Working Principles

The SST25VF016B-75-4I-S2AF utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in non-volatile memory cells that can be electrically erased and reprogrammed. The SPI interface allows for high-speed data transfer between the flash memory and the host device.

When data needs to be written or read, the host device sends commands and addresses to the flash memory through the SPI interface. The flash memory then performs the requested operation and returns the data or status information to the host device.

Detailed Application Field Plans

The SST25VF016B-75-4I-S2AF is widely used in various applications, including but not limited to:

  1. Microcontrollers: Used for storing firmware, configuration data, and program code.
  2. Embedded Systems: Provides non-volatile storage for system parameters, bootloaders, and application data.
  3. Consumer Electronics: Used in devices such as smart TVs, set-top boxes, and gaming consoles for firmware updates and data storage.
  4. Automotive Electronics: Enables storage of critical data, calibration parameters, and firmware in automotive systems.
  5. Industrial Control Systems: Used for storing configuration data, log files, and firmware in industrial automation and control applications.

Detailed and Complete Alternative Models

  1. Winbond W25Q16JVSSIQ: Similar specifications and functionality, available in a 16-pin SOIC package.
  2. Macronix MX25L1606EZNI-12G: Comparable

기술 솔루션에 SST25VF016B-75-4I-S2AF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of SST25VF016B-75-4I-S2AF in technical solutions:

  1. Q: What is the SST25VF016B-75-4I-S2AF? A: The SST25VF016B-75-4I-S2AF is a serial flash memory device with a capacity of 16 megabits (2 megabytes). It is commonly used for storing program code or data in various electronic devices.

  2. Q: What is the interface used by the SST25VF016B-75-4I-S2AF? A: The SST25VF016B-75-4I-S2AF uses the Serial Peripheral Interface (SPI) for communication with the host microcontroller or system.

  3. Q: What voltage levels does the SST25VF016B-75-4I-S2AF support? A: The SST25VF016B-75-4I-S2AF supports a voltage range of 2.7V to 3.6V, making it compatible with most standard microcontrollers and systems.

  4. Q: Can the SST25VF016B-75-4I-S2AF be easily soldered onto a PCB? A: Yes, the SST25VF016B-75-4I-S2AF comes in a standard 8-pin SOIC package, which can be easily soldered onto a PCB using standard surface mount techniques.

  5. Q: Is the SST25VF016B-75-4I-S2AF suitable for high-speed data transfer? A: Yes, the SST25VF016B-75-4I-S2AF supports a maximum clock frequency of 75 MHz, allowing for fast data transfer rates.

  6. Q: Can the SST25VF016B-75-4I-S2AF be used for code execution in microcontrollers? A: Yes, the SST25VF016B-75-4I-S2AF can be used as an external program memory for microcontrollers, allowing for flexible code storage and execution.

  7. Q: Does the SST25VF016B-75-4I-S2AF have any built-in security features? A: Yes, the SST25VF016B-75-4I-S2AF provides hardware and software protection mechanisms, such as write protection and password protection, to secure the stored data.

  8. Q: Can the SST25VF016B-75-4I-S2AF operate in extreme temperature conditions? A: Yes, the SST25VF016B-75-4I-S2AF has an extended temperature range of -40°C to +85°C, making it suitable for applications in harsh environments.

  9. Q: Is the SST25VF016B-75-4I-S2AF compatible with industry-standard flash memory protocols? A: Yes, the SST25VF016B-75-4I-S2AF supports the JEDEC standard command set, ensuring compatibility with other flash memory devices and systems.

  10. Q: Are there any application notes or reference designs available for the SST25VF016B-75-4I-S2AF? A: Yes, the manufacturer provides application notes, datasheets, and reference designs that can help developers integrate the SST25VF016B-75-4I-S2AF into their technical solutions efficiently.

Please note that the answers provided here are general and may vary depending on specific implementation requirements. It is always recommended to refer to the device's datasheet and documentation for accurate information.