이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SST39VF401C-70-4C-EKE-T

SST39VF401C-70-4C-EKE-T

Product Overview

Category

The SST39VF401C-70-4C-EKE-T belongs to the category of Flash Memory ICs.

Use

This product is primarily used for data storage and retrieval in electronic devices such as computers, smartphones, tablets, and other digital devices.

Characteristics

  • Non-volatile memory: The SST39VF401C-70-4C-EKE-T retains stored data even when power is turned off.
  • High capacity: This flash memory IC has a capacity of 4 megabits (512 kilobytes).
  • Fast access time: With a speed rating of 70 nanoseconds, it allows for quick data retrieval.
  • Low power consumption: The SST39VF401C-70-4C-EKE-T operates efficiently with low power requirements.
  • Wide temperature range: It can function reliably within a temperature range of -40°C to +85°C.

Package

The SST39VF401C-70-4C-EKE-T is available in a surface mount package. The specific package type is EKE-T.

Essence

The essence of this product lies in its ability to provide reliable and high-capacity non-volatile memory for various electronic devices.

Packaging/Quantity

The SST39VF401C-70-4C-EKE-T is typically packaged in reels or tubes, depending on the manufacturer's specifications. The quantity per package varies but is commonly around 250 units.

Specifications

  • Memory Type: Flash
  • Memory Size: 4 Megabits (512 Kilobytes)
  • Access Time: 70 Nanoseconds
  • Supply Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Interface: Parallel
  • Package Type: EKE-T

Detailed Pin Configuration

The SST39VF401C-70-4C-EKE-T has a total of 48 pins. The pin configuration is as follows:

  1. VCC - Power Supply
  2. A0-A18 - Address Inputs
  3. DQ0-DQ7 - Data Inputs/Outputs
  4. CE# - Chip Enable
  5. OE# - Output Enable
  6. WE# - Write Enable
  7. RESET# - Reset
  8. RP# - Ready/Busy
  9. BYTE# - Byte/Word Organization Select
  10. RY/BY# - Ready/Busy Output
  11. VSS - Ground

(Note: The remaining pins are not listed here for brevity.)

Functional Features

  • Erase and Program Operations: The SST39VF401C-70-4C-EKE-T supports both sector erase and byte program operations, allowing for flexible data manipulation.
  • Automatic Write Timing: This flash memory IC features an automatic write timing generator, simplifying the programming process.
  • Hardware Reset: The RESET# pin enables a hardware reset function, providing a convenient way to reset the device.
  • Low Power Consumption: The SST39VF401C-70-4C-EKE-T operates with low power consumption, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages

  • High capacity storage
  • Fast access time
  • Non-volatile memory
  • Wide temperature range operation
  • Low power consumption

Disadvantages

  • Limited compatibility with certain interfaces
  • Relatively higher cost compared to other memory options

Working Principles

The SST39VF401C-70-4C-EKE-T utilizes flash memory technology, which stores data in floating gate transistors. These transistors can retain their charge even when power is turned off, ensuring non-volatile storage. The device can be programmed by applying appropriate voltage levels to the control pins, and data can be read by accessing the memory address.

Detailed Application Field Plans

The SST39VF401C-70-4C-EKE-T is widely used in various applications, including but not limited to: - Computer systems - Mobile devices - Automotive electronics - Industrial control systems - Consumer electronics

Its high capacity, fast access time, and reliability make it suitable for storing firmware, operating systems, and other critical data in these fields.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the SST39VF401C-70-4C-EKE-T include: - AT49BV4096A: 4 Megabit Flash Memory IC - MX25L4006E: 4 Megabit Serial Flash Memory - W25Q32JV: 4 Megabit Quad-SPI Flash Memory

These alternatives provide comparable features and can be considered as substitutes depending on specific requirements and compatibility with the target system.

(Note: The list of alternative models can be expanded based on specific needs and availability in the market.)

기술 솔루션에 SST39VF401C-70-4C-EKE-T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of SST39VF401C-70-4C-EKE-T in technical solutions:

  1. Q: What is the maximum operating frequency of the SST39VF401C-70-4C-EKE-T? A: The maximum operating frequency of this device is 70 MHz.

  2. Q: What is the capacity of the SST39VF401C-70-4C-EKE-T? A: The SST39VF401C-70-4C-EKE-T has a capacity of 4 megabits (512 kilobytes).

  3. Q: Can I use this flash memory for code storage in an embedded system? A: Yes, the SST39VF401C-70-4C-EKE-T is commonly used for code storage in various embedded systems.

  4. Q: Does this flash memory support both read and write operations? A: Yes, the SST39VF401C-70-4C-EKE-T supports both read and write operations.

  5. Q: What is the typical power supply voltage range for this device? A: The typical power supply voltage range for the SST39VF401C-70-4C-EKE-T is 2.7V to 3.6V.

  6. Q: Is this flash memory compatible with SPI (Serial Peripheral Interface)? A: Yes, the SST39VF401C-70-4C-EKE-T uses the SPI interface for communication.

  7. Q: Can I use this flash memory in automotive applications? A: Yes, the SST39VF401C-70-4C-EKE-T is designed to meet automotive industry requirements.

  8. Q: What is the endurance rating of this flash memory? A: The SST39VF401C-70-4C-EKE-T has an endurance rating of 100,000 program/erase cycles.

  9. Q: Does this flash memory have any built-in security features? A: Yes, the SST39VF401C-70-4C-EKE-T offers various security features like software protection and hardware protection.

  10. Q: Can I operate this flash memory in a wide temperature range? A: Yes, the SST39VF401C-70-4C-EKE-T is designed to operate in a wide temperature range, typically from -40°C to +85°C.

Please note that these answers are based on general information about the SST39VF401C-70-4C-EKE-T and may vary depending on specific application requirements.