SST39VF402C-70-4I-B3KE-T
Product Overview
Category
The SST39VF402C-70-4I-B3KE-T belongs to the category of flash memory devices.
Use
This product is primarily used for data storage in various electronic devices such as computers, smartphones, tablets, and other digital devices.
Characteristics
- Non-volatile: The SST39VF402C-70-4I-B3KE-T retains stored data even when power is removed.
- High capacity: This flash memory device has a capacity of 4 gigabits (512 megabytes).
- Fast access time: It operates at a speed of 70 nanoseconds, allowing for quick data retrieval.
- Low power consumption: The SST39VF402C-70-4I-B3KE-T is designed to minimize power usage, making it suitable for battery-powered devices.
- Reliable: It offers high endurance and data retention reliability.
Package
The SST39VF402C-70-4I-B3KE-T is available in a surface-mount package, which facilitates easy integration onto printed circuit boards (PCBs).
Essence
The essence of this product lies in its ability to provide reliable and high-capacity data storage in a compact form factor.
Packaging/Quantity
The SST39VF402C-70-4I-B3KE-T is typically packaged in reels or trays, with each reel or tray containing a specific quantity of devices. The exact packaging and quantity may vary depending on the supplier.
Specifications
- Memory Type: Flash
- Capacity: 4 gigabits (512 megabytes)
- Access Time: 70 nanoseconds
- Supply Voltage: 2.7V - 3.6V
- Operating Temperature Range: -40°C to +85°C
- Interface: Parallel
- Package Type: Surface Mount
- RoHS Compliance: Yes
Detailed Pin Configuration
The SST39VF402C-70-4I-B3KE-T has a total of 48 pins. The pin configuration is as follows:
- VCC - Power supply voltage
- A0-A18 - Address inputs
- DQ0-DQ15 - Data input/output lines
- WE# - Write enable
- CE# - Chip enable
- OE# - Output enable
- RP# - Reset/Protection
- RY/BY# - Ready/Busy status
- WP# - Write protect
- VSS - Ground
(Note: This is a simplified representation of the pin configuration. Please refer to the datasheet for the complete pinout details.)
Functional Features
- Erase and Program Operations: The SST39VF402C-70-4I-B3KE-T supports both sector erase and byte program operations, allowing for flexible data manipulation.
- Sector Protection: It provides sector protection features to prevent accidental erasure or modification of critical data.
- Burst Mode: This flash memory device supports burst mode operation, enabling faster data transfer rates.
- Software/Hardware Data Protection: The SST39VF402C-70-4I-B3KE-T offers various methods of protecting stored data, including software and hardware-based protection mechanisms.
Advantages and Disadvantages
Advantages
- High capacity storage
- Fast access time
- Low power consumption
- Reliable data retention
- Sector protection features
Disadvantages
- Limited endurance (compared to other non-volatile memory technologies)
- Relatively higher cost per unit compared to some alternative memory options
Working Principles
The SST39VF402C-70-4I-B3KE-T utilizes a floating gate transistor technology to store data. It employs a combination of electrical charges to represent binary data (0s and 1s). The stored data can be read, erased, and programmed using specific voltage levels and control signals.
Detailed Application Field Plans
The SST39VF402C-70-4I-B3KE-T is widely used in various applications, including but not limited to: - Embedded systems - Solid-state drives (SSDs) - Automotive electronics - Industrial control systems - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the SST39VF402C-70-4I-B3KE-T include: - Micron MT29F4G08ABAEAWP - Samsung K9F4G08U0D - Toshiba TC58NVG2S0FTA00
These alternative models may have slightly different specifications and pin configurations, so it is important to consult their respective datasheets for detailed information.
In conclusion, the SST39VF402C-70-4I-B3KE-T flash memory device offers high-capacity, reliable data storage with fast access times. Its compact package and low power consumption make
기술 솔루션에 SST39VF402C-70-4I-B3KE-T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of SST39VF402C-70-4I-B3KE-T in technical solutions:
Q: What is the maximum operating frequency of the SST39VF402C-70-4I-B3KE-T? A: The maximum operating frequency of this device is 70 MHz.
Q: What is the capacity of the SST39VF402C-70-4I-B3KE-T? A: It has a capacity of 4 megabits (512 kilobytes).
Q: Can I use this flash memory for data storage in an embedded system? A: Yes, the SST39VF402C-70-4I-B3KE-T is commonly used for data storage in various embedded systems.
Q: Does this flash memory support both read and write operations? A: Yes, it supports both read and write operations.
Q: What is the operating voltage range of the SST39VF402C-70-4I-B3KE-T? A: The operating voltage range is typically between 2.7V and 3.6V.
Q: Is this flash memory compatible with SPI (Serial Peripheral Interface)? A: Yes, the SST39VF402C-70-4I-B3KE-T uses the SPI interface for communication.
Q: Can I use this flash memory in automotive applications? A: Yes, the SST39VF402C-70-4I-B3KE-T is designed to meet automotive industry requirements.
Q: What is the typical access time of this flash memory? A: The typical access time is around 70 nanoseconds.
Q: Does this flash memory have any built-in security features? A: Yes, it includes several security features like software and hardware protection mechanisms.
Q: Can I operate this flash memory in a wide temperature range? A: Yes, the SST39VF402C-70-4I-B3KE-T is designed to operate in a wide temperature range, typically from -40°C to 85°C.
Please note that these answers are based on general information about the SST39VF402C-70-4I-B3KE-T flash memory. For specific technical details, it is recommended to refer to the datasheet or consult the manufacturer's documentation.