TC1072-1.8VCH713
Product Overview
Category
TC1072-1.8VCH713 belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- Voltage: 1.8V
- Package: CH713
- Essence: Voltage regulator
- Packaging/Quantity: Varies based on supplier
Specifications
The specifications of TC1072-1.8VCH713 are as follows:
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 1.8V ± 2%
- Maximum Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 50µA (typical)
- Operating Temperature Range: -40°C to +85°C
- Package Type: CH713
Detailed Pin Configuration
The pin configuration of TC1072-1.8VCH713 is as follows:
- Pin 1: VIN (Input Voltage)
- Pin 2: GND (Ground)
- Pin 3: VOUT (Output Voltage)
Functional Features
TC1072-1.8VCH713 offers the following functional features:
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit current limiting
Advantages and Disadvantages
Advantages: - Stable output voltage - Low power consumption - Compact package size
Disadvantages: - Limited maximum output current - Narrow input voltage range
Working Principles
TC1072-1.8VCH713 operates based on the principle of a linear voltage regulator. It regulates the input voltage to a stable 1.8V output voltage by dissipating excess energy as heat.
Detailed Application Field Plans
TC1072-1.8VCH713 finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to TC1072-1.8VCH713 are: - LM1117-1.8V - MCP1700-1802E/TO - LP2985-18DBVR
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
In conclusion, TC1072-1.8VCH713 is a voltage regulator with a 1.8V output voltage. It offers low dropout voltage, low quiescent current, and thermal shutdown protection. While it has limitations in terms of maximum output current and input voltage range, it is suitable for various applications in battery-powered and portable electronic devices. Alternative models such as LM1117-1.8V, MCP1700-1802E/TO, and LP2985-18DBVR can also be considered based on specific needs.
기술 솔루션에 TC1072-1.8VCH713 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of TC1072-1.8VCH713 in technical solutions:
Q1: What is TC1072-1.8VCH713? A1: TC1072-1.8VCH713 is a specific model of voltage regulator used in electronic circuits to provide a stable output voltage of 1.8V.
Q2: What are the typical applications of TC1072-1.8VCH713? A2: TC1072-1.8VCH713 is commonly used in battery-powered devices, low-power microcontrollers, sensors, and other electronic systems that require a regulated 1.8V power supply.
Q3: What is the input voltage range for TC1072-1.8VCH713? A3: The input voltage range for TC1072-1.8VCH713 is typically between 2.5V and 6.0V.
Q4: How much current can TC1072-1.8VCH713 provide? A4: TC1072-1.8VCH713 can provide a maximum output current of 250mA.
Q5: Does TC1072-1.8VCH713 have built-in thermal protection? A5: Yes, TC1072-1.8VCH713 has built-in thermal shutdown protection to prevent overheating and damage.
Q6: Can TC1072-1.8VCH713 operate in both linear and switching modes? A6: No, TC1072-1.8VCH713 operates only in linear mode.
Q7: Is TC1072-1.8VCH713 suitable for automotive applications? A7: Yes, TC1072-1.8VCH713 is designed to meet the requirements of automotive applications, including temperature and voltage variations.
Q8: What is the typical dropout voltage of TC1072-1.8VCH713? A8: The typical dropout voltage of TC1072-1.8VCH713 is around 200mV at 100mA load current.
Q9: Can TC1072-1.8VCH713 be used in high-temperature environments? A9: Yes, TC1072-1.8VCH713 is capable of operating in temperatures up to 125°C.
Q10: Does TC1072-1.8VCH713 require any external components for operation? A10: TC1072-1.8VCH713 requires a minimum number of external components, typically an input capacitor and an output capacitor for stability.
Please note that the specific details and specifications may vary depending on the manufacturer's datasheet and application requirements.