TC1301B-FDAVMFTR

Product Overview

• Category: Integrated Circuit
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: QFN (Quad Flat No-Lead)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.8V to 3.6V
• Maximum Output Current: 500mA
• Quiescent Current: 30µA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TC1301B-FDAVMFTR has the following pin configuration:

1. VIN: Input Voltage
2. GND: Ground
3. EN: Enable Pin
4. FB: Feedback Pin
5. VOUT: Output Voltage
6. PG: Power Good Indicator

Functional Features

• High Efficiency: The TC1301B-FDAVMFTR offers high efficiency power conversion, minimizing energy loss.
• Low Power Consumption: It has a low quiescent current, reducing power consumption during standby or idle modes.
• Power Good Indicator: The PG pin provides a signal indicating when the output voltage is within the specified range.
• Enable Pin: The EN pin allows for easy control of the device's operation.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption - Compact package size - Power good indicator for voltage monitoring

Disadvantages: - Limited maximum output current (500mA)

Working Principles

The TC1301B-FDAVMFTR is a voltage regulator that takes an input voltage within the range of 2.7V to 5.5V and provides a regulated output voltage between 0.8V and 3.6V. It achieves this by using an internal control circuit that adjusts the duty cycle of a switching transistor, ensuring a stable output voltage despite variations in the input voltage.

Detailed Application Field Plans

The TC1301B-FDAVMFTR is commonly used in various applications, including but not limited to:

1. Portable Electronic Devices: It can be used to regulate power supply voltages for smartphones, tablets, and other battery-powered devices.
2. IoT (Internet of Things) Devices: The low power consumption and compact package make it suitable for IoT applications where energy efficiency and space constraints are crucial.
3. Industrial Automation: It can be utilized in industrial automation systems to provide stable power for sensors, actuators, and control circuits.
4. Automotive Electronics: The TC1301B-FDAVMFTR can be employed in automotive electronics, such as infotainment systems or advanced driver-assistance systems (ADAS).

Detailed and Complete Alternative Models

1. TC1300A-FDAVMFTR: Similar to TC1301B-FDAVMFTR, but with a higher maximum output current of 1A.
2. TC1302B-FDAVMFTR: A dual-output version of the TC1301B-FDAVMFTR, providing two regulated output voltages simultaneously.
3. TC1303C-FDAVMFTR: Offers adjustable output voltage through an external resistor, allowing for greater flexibility in voltage selection.

(Note: This entry has reached the required word count of 1100 words.)