이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
1N5230B (DO-35)

1N5230B (DO-35) - Encyclopedia Entry

Introduction

The 1N5230B (DO-35) is a semiconductor diode that belongs to the category of Zener diodes. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and voltage reference
  • Characteristics: Reverse breakdown voltage, low impedance, and precise voltage regulation
  • Package: DO-35
  • Essence: Semiconductor diode for voltage regulation
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Voltage Range: 4.3V to 75V
  • Power Dissipation: 500mW
  • Operating Temperature Range: -65°C to +200°C
  • Zener Impedance: 5Ω to 100Ω

Detailed Pin Configuration

The 1N5230B (DO-35) has two pins, anode, and cathode. The anode is connected to the positive terminal, while the cathode is connected to the negative terminal.

Functional Features

  • Precise Voltage Regulation: Maintains a constant voltage across the load
  • Low Impedance: Allows for efficient current flow
  • Reverse Breakdown Voltage: Protects circuits from overvoltage conditions

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low impedance for efficient current flow
  • Compact size and easy to use

Disadvantages

  • Limited power dissipation capability
  • Susceptible to damage from overcurrent conditions

Working Principles

The 1N5230B (DO-35) operates based on the principle of the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse biased. This allows it to regulate voltage within a specific range.

Detailed Application Field Plans

The 1N5230B (DO-35) is commonly used in various applications such as: - Voltage regulators - Voltage references - Overvoltage protection circuits - Signal clamping circuits

Detailed and Complete Alternative Models

Some alternative models to the 1N5230B (DO-35) include: - 1N5221B - 1N5226B - 1N5229B - BZX55C series

In summary, the 1N5230B (DO-35) Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and protection against overvoltage conditions. Its compact size and efficiency make it suitable for various applications in electronics.

[Word count: 386]

기술 솔루션에 1N5230B (DO-35) 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the 1N5230B (DO-35) diode used for?

    • The 1N5230B (DO-35) diode is commonly used as a voltage regulator or reference in various technical solutions.
  2. What is the maximum forward current rating of the 1N5230B (DO-35) diode?

    • The maximum forward current rating of the 1N5230B (DO-35) diode is typically around 500 mA.
  3. What is the voltage rating of the 1N5230B (DO-35) diode?

    • The 1N5230B (DO-35) diode has a nominal voltage rating of 5.1 volts.
  4. Can the 1N5230B (DO-35) diode be used for voltage regulation in power supply circuits?

    • Yes, the 1N5230B (DO-35) diode can be used for low-power voltage regulation in certain power supply circuits.
  5. Is the 1N5230B (DO-35) diode suitable for precision voltage references?

    • The 1N5230B (DO-35) diode can be used as a basic voltage reference, but for precision applications, additional circuitry may be required.
  6. What are the typical applications of the 1N5230B (DO-35) diode?

    • Typical applications include voltage clamping, overvoltage protection, and voltage regulation in low-power circuits.
  7. Does the 1N5230B (DO-35) diode require a heat sink for normal operation?

    • In most cases, the 1N5230B (DO-35) diode does not require a heat sink for normal operation due to its low power dissipation.
  8. Can the 1N5230B (DO-35) diode be used in reverse bias as a zener diode?

    • Yes, the 1N5230B (DO-35) diode can be used in reverse bias as a zener diode for voltage regulation purposes.
  9. What is the temperature coefficient of the 1N5230B (DO-35) diode?

    • The temperature coefficient of the 1N5230B (DO-35) diode is typically around -2 mV/°C.
  10. Are there any specific precautions to consider when using the 1N5230B (DO-35) diode in technical solutions?

    • It's important to ensure that the maximum power dissipation and current ratings are not exceeded, and to follow the manufacturer's datasheet recommendations for proper usage.