Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
1N5260A (DO-35)
자세히보기 데이터시트

1N5260A (DO-35) - Encyclopedia Entry

Introduction

The 1N5260A (DO-35) is a diode belonging to the category of semiconductor devices. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Rectification, voltage regulation, signal demodulation
  • Characteristics: Small size, high reliability, low forward voltage drop
  • Package: DO-35 glass axial package
  • Essence: Silicon rectifier diode
  • Packaging/Quantity: Typically available in reels or bulk packaging

Specifications

  • Voltage Rating: 60V
  • Forward Current: 500mA
  • Reverse Leakage Current: 5µA
  • Operating Temperature Range: -65°C to +175°C
  • Storage Temperature Range: -65°C to +200°C

Detailed Pin Configuration

The 1N5260A (DO-35) diode has two leads, with the cathode marked by a band on the body of the diode.

Functional Features

  • Efficient rectification of AC signals
  • Low forward voltage drop for minimal power loss
  • Fast switching characteristics

Advantages and Disadvantages

Advantages

  • Small form factor
  • High reliability
  • Low forward voltage drop

Disadvantages

  • Limited reverse voltage tolerance
  • Sensitive to temperature variations

Working Principles

The 1N5260A operates based on the principle of semiconductor junction behavior, allowing current flow in one direction while blocking it in the opposite direction.

Detailed Application Field Plans

The 1N5260A (DO-35) diode finds applications in: - Power supply units - Voltage regulation circuits - Signal demodulation circuits - Overvoltage protection circuits

Detailed and Complete Alternative Models

Some alternative models to the 1N5260A (DO-35) diode include: - 1N4001 (DO-41) - 1N4148 (DO-35) - 1N5819 (DO-41) - 1N5399 (DO-15)

In conclusion, the 1N5260A (DO-35) diode is a versatile semiconductor device with applications in various electronic circuits, offering efficient rectification and voltage regulation capabilities within a small form factor.

Word Count: 320

기술 솔루션에 1N5260A (DO-35) 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the 1N5260A (DO-35) diode used for?

    • The 1N5260A diode is commonly used for voltage regulation, signal demodulation, and protection in electronic circuits.

  2. What are the electrical characteristics of the 1N5260A diode?

    • The 1N5260A diode has a maximum forward voltage of 1.0V at 200mA and a reverse voltage of 60V.

  3. How do I connect the 1N5260A diode in a circuit?

    • The 1N5260A diode is typically connected in series with the load to provide reverse polarity protection or in parallel to shunt excess voltage.

  4. Can the 1N5260A diode handle high currents?

    • The 1N5260A diode is rated for a maximum continuous forward current of 200mA, making it suitable for low to moderate current applications.

  5. What is the temperature range for the 1N5260A diode?

    • The 1N5260A diode is designed to operate within a temperature range of -65°C to +175°C.

  6. Is the 1N5260A diode suitable for use in automotive applications?

    • Yes, the 1N5260A diode is often used in automotive electronics for voltage regulation and protection against voltage spikes.

  7. Can the 1N5260A diode be used in rectifier circuits?

    • While the 1N5260A diode can be used in rectifier circuits, it is more commonly employed for voltage regulation and protection purposes.

  8. What are some typical applications for the 1N5260A diode?

    • Typical applications include power supplies, voltage regulators, signal demodulation, and overvoltage protection in various electronic devices.

  9. Does the 1N5260A diode require a heat sink for certain applications?

    • For most standard applications within its specified ratings, the 1N5260A diode does not require a heat sink. However, in high-power or high-temperature scenarios, a heat sink may be necessary.

  10. Are there any common failure modes associated with the 1N5260A diode?

    • Common failure modes include thermal runaway due to excessive current or voltage, as well as breakdown under reverse bias conditions beyond its rated specifications. Proper circuit design and operating within specified limits can mitigate these risks.