1N5347BE3/TR8 - Semiconductor Diode
Basic Information Overview
- Category: Semiconductor Diode
- Use: Voltage regulation and rectification
- Characteristics: High current capability, low forward voltage drop
- Package: Through-hole, axial lead
- Essence: Regulating and rectifying electrical signals
- Packaging/Quantity: Bulk packaging, typically in reels or tubes
Specifications
- Voltage Rating: 10V
- Current Rating: 5W
- Operating Temperature Range: -65°C to 175°C
- Forward Voltage Drop: 0.9V at 1A
Detailed Pin Configuration
The 1N5347BE3/TR8 has a standard axial lead package with two leads. The anode is connected to the positive terminal, while the cathode is connected to the negative terminal.
Functional Features
- Voltage Regulation: Maintains a constant voltage output under varying load conditions.
- Rectification: Converts alternating current (AC) to direct current (DC).
Advantages and Disadvantages
Advantages
- High current capability
- Low forward voltage drop
- Reliable voltage regulation
Disadvantages
- Limited voltage rating
- Not suitable for high-frequency applications
Working Principles
The 1N5347BE3/TR8 operates based on the principles of semiconductor diode behavior. When forward-biased, it allows current flow in one direction, while blocking current in the reverse direction.
Detailed Application Field Plans
The 1N5347BE3/TR8 is commonly used in voltage regulation circuits, power supplies, and rectification applications. It is suitable for low to moderate power systems where a stable voltage output is required.
Detailed and Complete Alternative Models
- 1N5347B: Similar specifications but in a different package
- 1N5348BE3/TR8: Higher voltage rating with similar characteristics
- 1N5346BE3/TR8: Lower voltage rating with similar characteristics
This comprehensive entry provides detailed information about the 1N5347BE3/TR8 semiconductor diode, covering its basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.
기술 솔루션에 1N5347BE3/TR8 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the 1N5347BE3/TR8 diode used for?
- The 1N5347BE3/TR8 diode is commonly used as a voltage regulator in various technical solutions.
What is the maximum voltage rating of the 1N5347BE3/TR8 diode?
- The maximum voltage rating of the 1N5347BE3/TR8 diode is 20 volts.
What is the current rating of the 1N5347BE3/TR8 diode?
- The current rating of the 1N5347BE3/TR8 diode is typically around 5 amps.
How does the 1N5347BE3/TR8 diode regulate voltage?
- The 1N5347BE3/TR8 diode regulates voltage by maintaining a constant output voltage despite changes in input voltage or load conditions.
What are the typical applications of the 1N5347BE3/TR8 diode?
- Typical applications of the 1N5347BE3/TR8 diode include power supplies, voltage regulators, and other electronic circuits requiring stable voltage output.
Is the 1N5347BE3/TR8 diode suitable for automotive applications?
- Yes, the 1N5347BE3/TR8 diode is suitable for automotive applications where stable voltage regulation is required.
What are the temperature specifications for the 1N5347BE3/TR8 diode?
- The 1N5347BE3/TR8 diode is typically rated for operation within a temperature range of -65°C to 175°C.
Can the 1N5347BE3/TR8 diode be used in parallel to increase current handling capacity?
- Yes, the 1N5347BE3/TR8 diode can be used in parallel to increase current handling capacity in certain applications.
Does the 1N5347BE3/TR8 diode require a heat sink for high-power applications?
- Yes, a heat sink may be necessary for the 1N5347BE3/TR8 diode in high-power applications to dissipate excess heat.
Are there any common failure modes associated with the 1N5347BE3/TR8 diode?
- Common failure modes for the 1N5347BE3/TR8 diode include overcurrent conditions, thermal stress, and voltage spikes. Proper design and protection measures can mitigate these risks.