Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
1N5929C
자세히보기 데이터시트

1N5929C Diode

Product Overview

The 1N5929C diode is a semiconductor device belonging to the category of Zener diodes. It is commonly used for voltage regulation and protection in electronic circuits. The diode exhibits specific characteristics, comes in various packages, and is available in different quantities.

Basic Information

  • Category: Zener Diode
  • Use: Voltage Regulation and Protection
  • Characteristics: Reverse breakdown voltage, low impedance, temperature stability
  • Package: DO-41, SOD-123, SMA, SMB, SMC
  • Essence: Regulating voltage in electronic circuits
  • Packaging/Quantity: Available in tape and reel packaging, with varying quantities

Specifications

The 1N5929C diode has the following specifications: - Voltage Range: 3.3V to 200V - Power Dissipation: 1.5W - Operating Temperature: -65°C to +200°C - Zener Impedance: 10Ω to 1000Ω

Detailed Pin Configuration

The 1N5929C diode typically has two pins, anode, and cathode. The anode is connected to the positive side of the circuit, while the cathode is connected to the negative side.

Functional Features

  • Voltage Regulation: Maintains a constant voltage across its terminals.
  • Overvoltage Protection: Safeguards sensitive components by diverting excess voltage.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low impedance
  • Temperature stability

Disadvantages

  • Limited power dissipation capability
  • Susceptible to damage from excessive current

Working Principles

The 1N5929C diode operates based on the principle of the Zener effect. When the reverse voltage across the diode reaches the specified breakdown voltage, it begins to conduct, effectively regulating the voltage across its terminals.

Detailed Application Field Plans

The 1N5929C diode finds applications in various fields, including: - Power Supplies - Voltage Regulators - Overvoltage Protection Circuits - Signal Clipping Circuits

Detailed and Complete Alternative Models

Some alternative models to the 1N5929C diode include: - 1N4733A - BZX55C - MMBZ5221B - LM431

In conclusion, the 1N5929C diode is a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its characteristics, specifications, and application field plans make it a versatile choice for various electronic designs.

[Word Count: 349]

기술 솔루션에 1N5929C 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the 1N5929C diode used for?

    • The 1N5929C is a Zener diode commonly used for voltage regulation and protection in electronic circuits.

  2. What is the maximum power dissipation of the 1N5929C?

    • The maximum power dissipation of the 1N5929C is typically 1.5 watts.

  3. What is the voltage rating of the 1N5929C?

    • The 1N5929C has a nominal Zener voltage of 6.2 volts.

  4. How does the 1N5929C function in voltage regulation?

    • The 1N5929C conducts current in reverse-bias mode when the voltage across it exceeds its Zener voltage, effectively regulating the voltage.

  5. Can the 1N5929C be used for overvoltage protection?

    • Yes, the 1N5929C can be used to protect sensitive components from overvoltage by shunting excess voltage to ground.

  6. What are the typical applications of the 1N5929C in technical solutions?

    • The 1N5929C is commonly used in voltage regulators, voltage references, and surge suppressors in various electronic devices and circuits.

  7. What is the temperature coefficient of the 1N5929C?

    • The temperature coefficient of the 1N5929C is typically around -2 mV/°C, indicating a relatively stable voltage reference over a range of temperatures.

  8. What is the maximum forward voltage of the 1N5929C?

    • The maximum forward voltage of the 1N5929C is typically around 1.5 volts at a specified forward current.

  9. Is the 1N5929C suitable for high-frequency applications?

    • The 1N5929C is not specifically designed for high-frequency applications and may exhibit limitations in such scenarios.

  10. Are there any specific precautions to consider when using the 1N5929C in technical solutions?

    • It's important to ensure proper heat sinking and current limiting to prevent the 1N5929C from exceeding its maximum ratings, and to follow manufacturer guidelines for optimal performance.