이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
1PMT4109C/TR13

1PMT4109C/TR13

Product Overview

Category

The 1PMT4109C/TR13 belongs to the category of semiconductor devices, specifically zener diodes.

Use

It is commonly used for voltage regulation and protection in electronic circuits.

Characteristics

  • Zener voltage: 10V
  • Power dissipation: 1.5W
  • Package type: SOD-123

Package

The 1PMT4109C/TR13 is typically available in reels or tape and reel packaging.

Essence

This zener diode serves as a critical component in maintaining stable voltage levels within electronic circuits.

Packaging/Quantity

It is usually packaged in quantities of 3000 units per reel.

Specifications

  • Zener voltage: 10V
  • Power dissipation: 1.5W
  • Forward voltage: 1.2V
  • Reverse current: 5µA
  • Operating temperature range: -65°C to +150°C

Detailed Pin Configuration

The 1PMT4109C/TR13 has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.

Functional Features

  • Precise voltage regulation
  • Overvoltage protection
  • Low reverse leakage current

Advantages

  • High reliability
  • Small form factor
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Sensitivity to temperature variations

Working Principles

The zener diode operates by allowing current to flow in the forward direction like a normal diode, but also permits it to flow in the reverse direction when the voltage reaches the zener voltage. This characteristic makes it suitable for voltage regulation and protection applications.

Detailed Application Field Plans

The 1PMT4109C/TR13 is widely used in: - Voltage regulators - Overvoltage protection circuits - Power supplies - Electronic equipment requiring stable voltage levels

Detailed and Complete Alternative Models

Some alternative models to the 1PMT4109C/TR13 include: - BZX84C10 - MMBZ5248B - P6SMB10CA

In conclusion, the 1PMT4109C/TR13 zener diode is a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its compact size and wide operating temperature range make it suitable for various applications, although its limited power dissipation capability and sensitivity to temperature variations should be considered when designing circuits.

[Word count: 344]

기술 솔루션에 1PMT4109C/TR13 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is 1PMT4109C/TR13?

    • 1PMT4109C/TR13 is a 1W Zener diode with a voltage range of 3.3V to 200V, designed for use in various technical solutions.
  2. What are the typical applications of 1PMT4109C/TR13?

    • It is commonly used in voltage regulation, surge suppression, and overvoltage protection in electronic circuits and systems.
  3. What is the maximum power dissipation of 1PMT4109C/TR13?

    • The maximum power dissipation is 1W, making it suitable for low to moderate power applications.
  4. What is the operating temperature range of 1PMT4109C/TR13?

    • The operating temperature range is typically -65°C to +150°C, allowing for use in a wide range of environments.
  5. How does 1PMT4109C/TR13 provide overvoltage protection?

    • It conducts current when the voltage across it exceeds its breakdown voltage, effectively clamping the voltage to protect downstream components.
  6. Can 1PMT4109C/TR13 be used in automotive applications?

    • Yes, it can be used in automotive electronics for voltage regulation and transient protection.
  7. What are the key electrical characteristics of 1PMT4109C/TR13?

    • These include its zener voltage, reverse leakage current, and dynamic impedance, which are important for its performance in various applications.
  8. Is 1PMT4109C/TR13 suitable for high-frequency applications?

    • While it can function at moderate frequencies, it may not be ideal for very high-frequency applications due to its inherent capacitance and response time.
  9. Can 1PMT4109C/TR13 be used in power supply designs?

    • Yes, it can be employed in power supply circuits to regulate output voltage and protect against voltage spikes.
  10. Are there any specific layout considerations when using 1PMT4109C/TR13 in a circuit?

    • It is important to minimize trace lengths and keep the device close to the protected circuit to reduce parasitic inductance and ensure effective protection.

Please let me know if you need further information on any of these questions!