제품 세부사항은 사양을 확인하세요.
2N4899 Transistor
Product Overview
Category
The 2N4899 is a bipolar junction NPN transistor.
Use
It is commonly used for amplification and switching of electronic signals in various applications.
Characteristics
- High voltage capability
- Low noise
- Medium power dissipation
Package
The 2N4899 is typically available in a TO-39 metal can package.
Essence
This transistor is essential for electronic circuit design, particularly in audio amplifiers and signal processing circuits.
Packaging/Quantity
The 2N4899 is usually sold in reels or tubes containing multiple units.
Specifications
- Maximum Collector-Emitter Voltage: 80V
- Maximum Collector-Base Voltage: 100V
- Maximum Emitter-Base Voltage: 7V
- Collector Current - Continuous: 0.5A
- Power Dissipation: 1W
- Transition Frequency: 30MHz
Detailed Pin Configuration
The 2N4899 transistor has three pins: 1. Base (B) 2. Collector (C) 3. Emitter (E)
Functional Features
- Amplification of weak electronic signals
- Switching of electronic circuits
- Low noise operation
Advantages
- High voltage capability
- Low noise performance
- Suitable for medium power applications
Disadvantages
- Limited maximum collector current
- Relatively low transition frequency
Working Principles
The 2N4899 operates based on the principles of bipolar junction transistors, where the flow of current between the collector and emitter is controlled by the base current.
Detailed Application Field Plans
The 2N4899 transistor finds extensive use in the following applications: - Audio amplifiers - Signal processing circuits - Switching circuits - Oscillator circuits
Detailed and Complete Alternative Models
Some alternative models to the 2N4899 include: - 2N2222 - BC547 - 2N3904 - 2N4401
In conclusion, the 2N4899 transistor is a versatile component with high voltage capability and low noise characteristics, making it suitable for various electronic applications, especially in audio amplifiers and signal processing circuits.
[Word count: 298]
기술 솔루션에 2N4899 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the 2N4899 transistor used for?
- The 2N4899 transistor is commonly used for general-purpose amplification and switching applications in electronic circuits.
What are the key specifications of the 2N4899 transistor?
- The 2N4899 is a silicon NPN transistor with a maximum collector current of 0.5A, a maximum collector-base voltage of 80V, and a maximum power dissipation of 0.625W.
Can the 2N4899 be used for audio amplifier circuits?
- Yes, the 2N4899 can be used in low-power audio amplifier circuits due to its general-purpose amplification capabilities.
Is the 2N4899 suitable for switching applications?
- Yes, the 2N4899 can be used for low-power switching applications due to its moderate collector current and voltage ratings.
What are the typical operating conditions for the 2N4899?
- The 2N4899 operates within a temperature range of -65°C to 200°C and is typically used in low to moderate frequency applications.
Are there any common alternative transistors to the 2N4899?
- Common alternatives to the 2N4899 include the 2N2222, 2N3904, and BC547, which are also widely used for general-purpose applications.
Can the 2N4899 be used in high-frequency applications?
- The 2N4899 is not typically recommended for high-frequency applications due to its limited frequency response.
What are the typical circuit configurations for the 2N4899?
- The 2N4899 can be used in common emitter, common base, and common collector configurations depending on the specific application requirements.
Does the 2N4899 require a heat sink for certain applications?
- For high-power dissipation applications, a heat sink may be necessary to ensure the 2N4899 operates within its specified temperature limits.
Where can I find detailed datasheets and application notes for the 2N4899?
- Detailed datasheets and application notes for the 2N4899 can be found on semiconductor manufacturer websites or electronics component distributor platforms.