JANTX1N3595AUR-1
Product Overview
Category
The JANTX1N3595AUR-1 belongs to the category of semiconductor devices.
Use
It is commonly used as a high-reliability diode in various electronic applications.
Characteristics
- High reliability
- Low forward voltage drop
- Fast switching speed
- High surge current capability
Package
The JANTX1N3595AUR-1 is typically available in a DO-41 package.
Essence
This diode is essential for providing reliable and efficient rectification and signal modulation in electronic circuits.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Maximum repetitive peak reverse voltage: 200V
- Average rectified forward current: 1A
- Non-repetitive peak surge current: 30A
- Operating temperature range: -65°C to +175°C
Detailed Pin Configuration
The JANTX1N3595AUR-1 has two pins, anode and cathode, which are identified by the physical orientation of the diode within the DO-41 package.
Functional Features
- Efficient rectification of AC signals
- Fast switching for signal modulation
- Reliable performance under varying operating conditions
Advantages
- High reliability makes it suitable for critical applications
- Low forward voltage drop minimizes power loss
- Fast switching speed enables high-frequency operation
Disadvantages
- Limited maximum repetitive peak reverse voltage compared to some other diode models
- Relatively low average rectified forward current rating for certain high-power applications
Working Principles
The JANTX1N3595AUR-1 operates based on the principles of semiconductor junction behavior, allowing for unidirectional current flow and fast switching characteristics.
Detailed Application Field Plans
This diode is widely used in: - Power supply units - Signal demodulation circuits - Voltage clamping and protection circuits - Switching and control circuits
Detailed and Complete Alternative Models
Some alternative models to consider include: - JANTX1N4148UR-1 - JANTX1N5806UR-1 - JANTX1N5550UR-1
In conclusion, the JANTX1N3595AUR-1 is a high-reliability diode with efficient rectification and fast switching capabilities, making it suitable for a wide range of electronic applications. Its characteristics, specifications, and application field plans demonstrate its importance in modern electronic design and manufacturing.
[Word count: 386]
기술 솔루션에 JANTX1N3595AUR-1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the JANTX1N3595AUR-1?
- The JANTX1N3595AUR-1 is a high-reliability, military-grade silicon power rectifier diode designed for use in demanding technical applications.
What are the key specifications of the JANTX1N3595AUR-1?
- The JANTX1N3595AUR-1 has a maximum repetitive peak reverse voltage of 200 volts, a forward current of 3 amperes, and a forward voltage drop of 1 volt at 3 amperes.
In what technical solutions can the JANTX1N3595AUR-1 be used?
- The JANTX1N3595AUR-1 can be used in power supplies, inverters, converters, and other high-reliability applications where a rugged and reliable rectifier diode is required.
What are the advantages of using the JANTX1N3595AUR-1 in technical solutions?
- The JANTX1N3595AUR-1 offers high reliability, excellent surge capability, and low forward voltage drop, making it suitable for demanding environments and critical applications.
What are the temperature ratings for the JANTX1N3595AUR-1?
- The JANTX1N3595AUR-1 is rated for operation over a temperature range of -65°C to +175°C, making it suitable for use in extreme environmental conditions.
Is the JANTX1N3595AUR-1 compliant with any industry standards?
- Yes, the JANTX1N3595AUR-1 is compliant with MIL-PRF-19500/406, making it suitable for military and aerospace applications.
Can the JANTX1N3595AUR-1 be used in high-frequency applications?
- While the JANTX1N3595AUR-1 is not specifically designed for high-frequency applications, it can be used in moderate frequency applications with appropriate consideration for its characteristics.
What are the typical failure modes of the JANTX1N3595AUR-1?
- The JANTX1N3595AUR-1 may fail due to excessive current, voltage spikes, or prolonged exposure to high temperatures, so proper design and operating conditions should be considered.
Are there any recommended mounting and handling practices for the JANTX1N3595AUR-1?
- Yes, the JANTX1N3595AUR-1 should be mounted on a suitable heat sink and handled with appropriate ESD precautions to ensure its reliability and performance.
Where can I find detailed application notes and guidelines for using the JANTX1N3595AUR-1 in technical solutions?
- Detailed application notes and guidelines for the JANTX1N3595AUR-1 can be found in the product datasheet and related technical documentation provided by the manufacturer.