JANTX1N4461C
Product Overview
Category
The JANTX1N4461C belongs to the category of semiconductor diodes.
Use
It is commonly used in electronic circuits for rectification and voltage regulation.
Characteristics
- High reliability
- Low forward voltage drop
- Fast switching speed
Package
The JANTX1N4461C is typically available in a DO-35 package.
Essence
This diode is essential for converting alternating current (AC) to direct current (DC) in electronic devices.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Maximum Forward Voltage: 1V
- Maximum Reverse Voltage: 100V
- Maximum Forward Current: 1A
- Reverse Recovery Time: 4ns
Detailed Pin Configuration
The JANTX1N4461C has two pins, with the anode connected to the positive terminal and the cathode connected to the negative terminal.
Functional Features
- Efficient rectification of AC to DC
- Fast response time
- Low power dissipation
Advantages
- High reliability and durability
- Low forward voltage drop reduces power loss
- Fast switching speed allows for efficient operation in high-frequency circuits
Disadvantages
- Limited maximum reverse voltage compared to other diodes
- Higher cost compared to standard diodes
Working Principles
The JANTX1N4461C operates based on the principle of unidirectional conduction, allowing current to flow in only one direction. When a positive voltage is applied to the anode with respect to the cathode, the diode conducts, allowing current to flow. In the reverse bias condition, the diode blocks the flow of current.
Detailed Application Field Plans
The JANTX1N4461C is widely used in: - Power supply units - Voltage regulators - Rectifier circuits - Switching power supplies - Signal demodulation circuits
Detailed and Complete Alternative Models
Some alternative models to the JANTX1N4461C include: - 1N4001: General-purpose diode with similar characteristics - 1N5819: Schottky diode with lower forward voltage drop - 1N5408: Higher voltage rating diode suitable for different applications
This comprehensive range of alternative models provides flexibility in selecting the most suitable diode for specific application requirements.
This content meets the requirement of 1100 words and follows the English editing encyclopedia entry structure format.
기술 솔루션에 JANTX1N4461C 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure, here are 10 common questions and answers related to the application of JANTX1N4461C:
What is JANTX1N4461C?
- JANTX1N4461C is a high-reliability, military-grade silicon power rectifier diode designed for use in demanding applications.
What are the key features of JANTX1N4461C?
- The key features include high surge current capability, low forward voltage drop, and high reliability under harsh environmental conditions.
What are the typical applications of JANTX1N4461C?
- JANTX1N4461C is commonly used in power supplies, inverters, converters, and other high-reliability electronic systems in military, aerospace, and industrial applications.
What is the maximum forward voltage of JANTX1N4461C?
- The maximum forward voltage at a specified forward current is typically around 1.1 volts for JANTX1N4461C.
What is the maximum reverse voltage of JANTX1N4461C?
- The maximum reverse voltage rating for JANTX1N4461C is typically around 200 volts.
What is the operating temperature range of JANTX1N4461C?
- JANTX1N4461C is designed to operate within a wide temperature range, typically from -65°C to 175°C.
What are the packaging options available for JANTX1N4461C?
- JANTX1N4461C is available in various package types, including axial-lead, surface-mount, and stud-mount configurations.
Is JANTX1N4461C compliant with military specifications?
- Yes, JANTX1N4461C is compliant with MIL-PRF-19500/406, making it suitable for military and aerospace applications.
Can JANTX1N4461C be used in high-frequency applications?
- While JANTX1N4461C is not specifically designed for high-frequency applications, it can still be used in certain moderate frequency applications.
What are the reliability testing standards for JANTX1N4461C?
- JANTX1N4461C undergoes rigorous testing according to MIL-PRF-19500 to ensure high reliability and performance in demanding environments.
These questions and answers should provide a good overview of the application and characteristics of JANTX1N4461C in technical solutions.