Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
JANTX1N935B-1
자세히보기 데이터시트

JANTX1N935B-1

Introduction

The JANTX1N935B-1 is a semiconductor diode that belongs to the category of high-reliability rectifiers. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the JANTX1N935B-1.

Basic Information Overview

  • Category: High-reliability rectifier diode
  • Use: Rectification and voltage regulation in high-reliability applications
  • Characteristics: High reliability, low forward voltage drop, high surge current capability
  • Package: Axial leaded package
  • Essence: Reliable rectification and voltage regulation
  • Packaging/Quantity: Available in bulk packaging with specified quantities

Specifications

  • Forward Voltage Drop: [Specify value]
  • Reverse Voltage: [Specify value]
  • Maximum Forward Current: [Specify value]
  • Surge Current Capability: [Specify value]
  • Operating Temperature Range: [Specify range]

Detailed Pin Configuration

The JANTX1N935B-1 has an axial leaded package with two leads. The anode and cathode terminals are clearly marked for easy identification.

Functional Features

  • High reliability suitable for critical applications
  • Low forward voltage drop for efficient energy conversion
  • High surge current capability for robust performance in transient conditions

Advantages and Disadvantages

Advantages

  • High reliability makes it suitable for critical applications
  • Low forward voltage drop ensures efficient energy conversion
  • High surge current capability provides robust performance in transient conditions

Disadvantages

  • [Specify any known disadvantages]

Working Principles

The JANTX1N935B-1 operates based on the principle of rectification, allowing current to flow in one direction while blocking it in the reverse direction. This enables it to regulate voltage and convert alternating current (AC) to direct current (DC) in high-reliability applications.

Detailed Application Field Plans

The JANTX1N935B-1 is commonly used in the following application fields: - Aerospace and defense systems - Medical equipment - Industrial power supplies - Telecommunications infrastructure

Detailed and Complete Alternative Models

  • JANTX1N935B: Similar specifications and characteristics
  • JANTX1N936B-1: Higher reverse voltage rating
  • JANTX1N934B-1: Lower forward voltage drop

In conclusion, the JANTX1N935B-1 is a high-reliability rectifier diode with specific characteristics and applications. Its robust performance, low forward voltage drop, and high surge current capability make it well-suited for critical applications in various industries.

[Word count: 398]

기술 솔루션에 JANTX1N935B-1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the JANTX1N935B-1 diode used for?

    • The JANTX1N935B-1 diode is commonly used for voltage regulation, signal rectification, and protection in various technical solutions.

  2. What are the key specifications of the JANTX1N935B-1 diode?

    • The JANTX1N935B-1 diode typically has a maximum repetitive peak reverse voltage of 200V, a forward current of 3A, and a forward voltage drop of around 1V at the rated current.

  3. How does the JANTX1N935B-1 diode compare to similar diodes in terms of performance?

    • The JANTX1N935B-1 diode offers high reliability, low leakage current, and fast switching characteristics, making it suitable for demanding technical applications.

  4. Can the JANTX1N935B-1 diode be used in high-temperature environments?

    • Yes, the JANTX1N935B-1 diode is designed to operate reliably at elevated temperatures, making it suitable for applications where thermal stability is crucial.

  5. What are some common technical solutions that benefit from using the JANTX1N935B-1 diode?

    • Technical solutions such as power supplies, voltage regulators, electronic instrumentation, and industrial control systems often utilize the JANTX1N935B-1 diode for its robust performance.

  6. Does the JANTX1N935B-1 diode require any special handling or mounting considerations?

    • The JANTX1N935B-1 diode should be handled with standard ESD precautions and mounted using appropriate techniques to ensure proper heat dissipation and electrical connections.

  7. Are there any known failure modes or reliability issues associated with the JANTX1N935B-1 diode?

    • The JANTX1N935B-1 diode is known for its high reliability and long operational lifespan when operated within its specified parameters, with minimal risk of failure under normal usage conditions.

  8. Can the JANTX1N935B-1 diode be used in automotive or aerospace applications?

    • Yes, the JANTX1N935B-1 diode meets stringent quality and reliability standards, making it suitable for use in automotive, aerospace, and other mission-critical applications.

  9. What are the typical packaging options available for the JANTX1N935B-1 diode?

    • The JANTX1N935B-1 diode is commonly available in industry-standard packages such as DO-41, DO-201AD, and axial leaded formats, offering flexibility for different application requirements.

  10. Where can I find detailed application notes and technical resources for integrating the JANTX1N935B-1 diode into my design?

    • Detailed application notes, datasheets, and technical resources for the JANTX1N935B-1 diode can be obtained from authorized distributors, manufacturer websites, and industry publications.