JANTXV1N3595AUR-1
Product Overview
Category
The JANTXV1N3595AUR-1 belongs to the category of semiconductor devices.
Use
It is commonly used in electronic circuits for voltage regulation and transient suppression.
Characteristics
- High reliability
- Low leakage current
- Fast response time
Package
The JANTXV1N3595AUR-1 is typically available in a DO-41 package.
Essence
This product serves as a critical component in protecting electronic circuits from voltage spikes and transients.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Maximum Reverse Voltage: 30V
- Peak Pulse Current: 40A
- Breakdown Voltage: 33.3V
- Operating Temperature Range: -65°C to 175°C
Detailed Pin Configuration
The JANTXV1N3595AUR-1 has a two-pin configuration, with the anode and cathode serving as the primary connection points.
Functional Features
- Transient voltage suppression
- Overvoltage protection
- Fast response to voltage spikes
Advantages
- High reliability
- Low leakage current
- Wide operating temperature range
Disadvantages
- Limited peak pulse current handling capacity
- Requires careful consideration of mounting and layout for optimal performance
Working Principles
The JANTXV1N3595AUR-1 operates by diverting excessive voltage away from sensitive electronic components, thereby safeguarding them from damage due to transient events.
Detailed Application Field Plans
This product finds extensive use in: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
- JANTXV1N3595AUR
- JANTXV1N3595B
- JANTXV1N3595BUR
In conclusion, the JANTXV1N3595AUR-1 is a reliable semiconductor device that plays a crucial role in protecting electronic circuits from voltage transients and spikes. Its high reliability and fast response make it a preferred choice in various applications, despite its limitations in peak pulse current handling. Additionally, there are alternative models available for users to consider based on specific requirements.
[Word Count: 298]
기술 솔루션에 JANTXV1N3595AUR-1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the JANTXV1N3595AUR-1 diode used for?
- The JANTXV1N3595AUR-1 diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.
What are the key specifications of the JANTXV1N3595AUR-1 diode?
- The JANTXV1N3595AUR-1 diode typically has a maximum repetitive reverse voltage of 200V, a forward current of 3A, and a low forward voltage drop.
How does the JANTXV1N3595AUR-1 diode compare to other similar diodes?
- The JANTXV1N3595AUR-1 diode offers high reliability, low leakage current, and excellent surge-handling capabilities compared to other diodes in its class.
In what applications is the JANTXV1N3595AUR-1 diode commonly used?
- This diode is often used in power supplies, voltage regulators, inverters, and industrial control systems due to its robustness and performance.
What are the temperature and storage requirements for the JANTXV1N3595AUR-1 diode?
- The diode is designed to operate within a temperature range of -65°C to +175°C and should be stored in a dry environment at room temperature.
Does the JANTXV1N3595AUR-1 diode require any special mounting considerations?
- It is recommended to mount the diode on a suitable heat sink to ensure optimal thermal management and long-term reliability.
Can the JANTXV1N3595AUR-1 diode handle high-frequency applications?
- While it is not specifically designed for high-frequency applications, it can still perform adequately in moderate frequency ranges.
What are the potential failure modes of the JANTXV1N3595AUR-1 diode?
- Common failure modes include overvoltage breakdown, thermal overstress, and excessive reverse current leading to degradation or short-circuiting.
Are there any recommended circuit protection measures when using the JANTXV1N3595AUR-1 diode?
- Employing appropriate overvoltage protection devices and ensuring proper current limiting can help safeguard the diode and the overall circuit.
Where can I find detailed application notes and reference designs for the JANTXV1N3595AUR-1 diode?
- Detailed application notes and reference designs can typically be found in the product datasheet, manufacturer's website, or through technical support channels.