JANTXV1N751CUR-1
Introduction
The JANTXV1N751CUR-1 is a semiconductor diode belonging to the category of Zener diodes. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the JANTXV1N751CUR-1.
Basic Information Overview
- Category: Semiconductor Diode
- Use: Voltage Regulation
- Characteristics: Zener Diode, High Precision, Low Leakage Current
- Package: Axial Lead
- Essence: Voltage Stabilization
- Packaging/Quantity: Bulk Packaging, Quantity Varies
Specifications
- Voltage - Zener (Nom) (Vz): 5.6V
- Power - Max: 500mW
- Impedance (Max) (Zzt): 20 Ohm
- Current - Reverse Leakage @ Vr: 100nA @ 1V
- Tolerance: ±5%
- Operating Temperature: -65°C ~ 200°C
Detailed Pin Configuration
The JANTXV1N751CUR-1 has an axial lead package with two leads. The cathode is marked with a band on the body of the diode.
Functional Features
- Precise Voltage Regulation
- Low Reverse Leakage Current
- High Stability Over a Wide Temperature Range
Advantages and Disadvantages
Advantages
- Accurate Voltage Regulation
- Low Leakage Current
- High Temperature Stability
Disadvantages
- Limited Power Dissipation
- Sensitive to Overvoltage Conditions
Working Principles
The JANTXV1N751CUR-1 operates based on the Zener effect, where it maintains a constant voltage across its terminals when reverse-biased within its specified voltage range.
Detailed Application Field Plans
The JANTXV1N751CUR-1 is commonly used in precision voltage regulation circuits, overvoltage protection, and as a voltage reference in various electronic devices. It finds applications in power supplies, instrumentation, and automotive electronics.
Detailed and Complete Alternative Models
- JANTXV1N746A: 4.7V Zener Voltage, 500mW Power Dissipation
- JANTXV1N759A: 6.2V Zener Voltage, 500mW Power Dissipation
- JANTXV1N823A: 13V Zener Voltage, 500mW Power Dissipation
In conclusion, the JANTXV1N751CUR-1 is a semiconductor diode designed for precise voltage regulation and stabilization. Its high precision, low leakage current, and stability make it suitable for various electronic applications, despite its limitations in power dissipation and sensitivity to overvoltage conditions.
[Word Count: 411]
기술 솔루션에 JANTXV1N751CUR-1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the JANTXV1N751CUR-1?
- The JANTXV1N751CUR-1 is a high-reliability, military-grade diode designed for use in critical applications where performance and durability are essential.
What are the key specifications of the JANTXV1N751CUR-1?
- The JANTXV1N751CUR-1 is a 6.8V, 500mW Zener diode with a tolerance of ±5%.
In what technical solutions can the JANTXV1N751CUR-1 be used?
- The JANTXV1N751CUR-1 is commonly used in aerospace, defense, and other high-reliability applications where precise voltage regulation and protection against voltage spikes are required.
What are the temperature and storage requirements for the JANTXV1N751CUR-1?
- The JANTXV1N751CUR-1 is designed to operate within a temperature range of -65°C to +175°C and should be stored in a dry environment at temperatures between -10°C and +40°C.
How does the JANTXV1N751CUR-1 compare to commercial-grade diodes?
- The JANTXV1N751CUR-1 undergoes more rigorous testing and screening processes to ensure its reliability and performance under extreme conditions, making it suitable for mission-critical applications.
Can the JANTXV1N751CUR-1 be used in automotive electronics?
- While the JANTXV1N751CUR-1 is not specifically designed for automotive applications, its high-reliability features make it suitable for certain automotive systems that require robust components.
What are the potential failure modes of the JANTXV1N751CUR-1?
- Common failure modes include excessive current, voltage transients, and thermal stress. Proper design and application considerations can mitigate these risks.
Are there any recommended test procedures for validating the performance of the JANTXV1N751CUR-1?
- Standard electrical tests, such as forward voltage, reverse leakage, and zener impedance measurements, can be performed to verify the diode's conformance to specifications.
What are the soldering and handling guidelines for the JANTXV1N751CUR-1?
- The diode should be handled with ESD precautions and soldered using industry-standard methods to prevent damage to the device.
Where can I find detailed technical documentation for the JANTXV1N751CUR-1?
- Detailed technical specifications, application notes, and reliability data for the JANTXV1N751CUR-1 can be obtained from the manufacturer's datasheets and product literature.