Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MAPLAD36KP110AE3
자세히보기 데이터시트

MAPLAD36KP110AE3

Product Overview

Category

The MAPLAD36KP110AE3 belongs to the category of electronic components, specifically a transient voltage suppressor (TVS) diode.

Use

It is used to protect sensitive electronic components from voltage spikes and transients.

Characteristics

  • High surge capability
  • Low clamping voltage
  • Fast response time
  • RoHS compliant

Package

The MAPLAD36KP110AE3 is available in a DO-203AB package.

Essence

The essence of this product lies in its ability to divert excessive current away from sensitive components during voltage surges.

Packaging/Quantity

The MAPLAD36KP110AE3 is typically packaged in reels and is available in quantities suitable for industrial applications.

Specifications

  • Peak Pulse Power: 36kW
  • Standoff Voltage: 110V
  • Breakdown Voltage: 122V
  • Maximum Clamping Voltage: 177V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The MAPLAD36KP110AE3 has a standard axial lead configuration with two leads.

Functional Features

  • Provides protection against voltage transients
  • Fast response time ensures minimal impact on the protected circuit
  • High surge capability allows it to handle large transient currents

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes
  • Fast response time
  • RoHS compliant

Disadvantages

  • May require additional circuitry for comprehensive overvoltage protection

Working Principles

The MAPLAD36KP110AE3 works by shunting excessive current away from the protected circuit when a voltage transient occurs. It achieves this through rapid conduction and clamping of the transient voltage to a safe level.

Detailed Application Field Plans

The MAPLAD36KP110AE3 is commonly used in various electronic systems, including: - Power supplies - Communication equipment - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

  • Alternative Model 1: MAPLAD36KP120AE3

    • Standoff Voltage: 120V
    • Breakdown Voltage: 133V
    • Maximum Clamping Voltage: 193V

  • Alternative Model 2: MAPLAD36KP150AE3

    • Standoff Voltage: 150V
    • Breakdown Voltage: 165V
    • Maximum Clamping Voltage: 241V

  • Alternative Model 3: MAPLAD36KP200AE3

    • Standoff Voltage: 200V
    • Breakdown Voltage: 222V
    • Maximum Clamping Voltage: 332V

This completes the entry for the MAPLAD36KP110AE3, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

기술 솔루션에 MAPLAD36KP110AE3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is MAPLAD36KP110AE3?

    • MAPLAD36KP110AE3 is a high-power, high-reliability silicon carbide (SiC) Schottky diode designed for various power electronic applications.

  2. What are the key features of MAPLAD36KP110AE3?

    • The key features include a high surge capability, low forward voltage drop, fast switching speed, and high temperature operation.

  3. What are the typical applications of MAPLAD36KP110AE3?

    • Typical applications include power factor correction, solar inverters, motor drives, and other high-power systems requiring efficient and reliable diodes.

  4. What is the maximum forward current rating of MAPLAD36KP110AE3?

    • The maximum forward current rating is typically 36A.

  5. What is the reverse recovery time of MAPLAD36KP110AE3?

    • The reverse recovery time is typically very short, contributing to its fast switching speed.

  6. Does MAPLAD36KP110AE3 have any thermal management requirements?

    • Yes, it is recommended to use proper heat sinking or thermal management techniques due to its high-power capabilities.

  7. What are the environmental ratings for MAPLAD36KP110AE3?

    • It is typically rated for operation in harsh environments with wide temperature ranges and high humidity.

  8. Can MAPLAD36KP110AE3 be used in parallel configurations for higher current applications?

    • Yes, it can be used in parallel to increase the overall current handling capability.

  9. Are there any specific layout considerations when using MAPLAD36KP110AE3?

    • Proper layout design, including minimizing parasitic inductance and ensuring good thermal conductivity, is important for optimal performance.

  10. Where can I find detailed technical specifications and application notes for MAPLAD36KP110AE3?

    • Detailed technical specifications and application notes can be found in the product datasheet provided by the manufacturer or distributor.