MAPLAD36KP70CAE3
Introduction
The MAPLAD36KP70CAE3 belongs to the category of transient voltage suppressor (TVS) diodes and is commonly used for protecting electronic circuits from voltage spikes and transients. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MAPLAD36KP70CAE3.
Basic Information Overview
- Category: Transient Voltage Suppressor (TVS) Diode
- Use: Protection against voltage spikes and transients in electronic circuits
- Characteristics: High surge capability, low clamping voltage, fast response time
- Package: SMC (DO-214AB)
- Essence: Safeguarding sensitive electronic components
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Peak Pulse Power: 36kW
- Standoff Voltage: 70V
- Breakdown Voltage: 77.8V to 86V
- Maximum Clamping Voltage: 113V at 58.9A
- Operating Temperature Range: -55°C to +175°C
- Storage Temperature Range: -55°C to +175°C
Detailed Pin Configuration
The MAPLAD36KP70CAE3 TVS diode has a standard SMC (DO-214AB) package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode
Functional Features
- Transient Voltage Suppression: Provides protection by diverting excessive current away from sensitive components during voltage spikes.
- Fast Response Time: Reacts quickly to transient events, minimizing the risk of damage to connected devices.
- High Surge Capability: Can withstand high surge currents without degradation.
Advantages and Disadvantages
Advantages
- Effective protection against voltage transients
- Fast response time
- High surge capability
Disadvantages
- May exhibit leakage current at lower voltages
- Requires careful consideration of placement in circuit design
Working Principles
The MAPLAD36KP70CAE3 operates based on the principle of avalanche breakdown, where it rapidly conducts excess current when the voltage exceeds the breakdown voltage, thereby protecting downstream components.
Detailed Application Field Plans
The MAPLAD36KP70CAE3 is widely used in various applications, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the MAPLAD36KP70CAE3 include: - SMAJ36A: Standoff Voltage - 36V, Peak Pulse Power - 400W - P6KE68CA: Standoff Voltage - 68V, Peak Pulse Power - 600W - 1.5KE82A: Standoff Voltage - 82V, Peak Pulse Power - 1500W - SMBJ100A: Standoff Voltage - 100V, Peak Pulse Power - 600W
In conclusion, the MAPLAD36KP70CAE3 TVS diode offers robust transient voltage suppression capabilities, making it an essential component for safeguarding sensitive electronic circuits across various industries.
Word Count: 443
기술 솔루션에 MAPLAD36KP70CAE3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is MAPLAD36KP70CAE3?
- MAPLAD36KP70CAE3 is a high-power, high-voltage diode array designed for use in surge protection and transient voltage suppression applications.
What are the key features of MAPLAD36KP70CAE3?
- The key features of MAPLAD36KP70CAE3 include a peak pulse power dissipation of 36kW, a breakdown voltage of 70V, and a low clamping voltage to provide effective protection against transient events.
In what technical solutions can MAPLAD36KP70CAE3 be used?
- MAPLAD36KP70CAE3 can be used in various technical solutions such as power supplies, motor drives, industrial equipment, and telecommunications systems to protect sensitive components from voltage surges and transients.
How does MAPLAD36KP70CAE3 provide surge protection?
- MAPLAD36KP70CAE3 provides surge protection by quickly diverting excess voltage away from sensitive components and limiting the voltage to a safe level, thus preventing damage from transient events.
What are the typical applications for MAPLAD36KP70CAE3 in technical solutions?
- Typical applications for MAPLAD36KP70CAE3 include surge protection in power distribution systems, transient voltage suppression in electronic equipment, and overvoltage protection in industrial machinery.
What are the advantages of using MAPLAD36KP70CAE3 in technical solutions?
- The advantages of using MAPLAD36KP70CAE3 include its high power handling capability, low clamping voltage, and fast response time, which make it an effective solution for protecting sensitive electronics from voltage transients.
Can MAPLAD36KP70CAE3 be used in automotive applications?
- Yes, MAPLAD36KP70CAE3 can be used in automotive applications to provide surge protection for electronic control units, sensors, and other critical components in vehicles.
Are there any specific mounting or thermal considerations for using MAPLAD36KP70CAE3?
- It is important to ensure proper thermal management and mounting techniques when using MAPLAD36KP70CAE3 to maximize its performance and reliability in technical solutions.
What standards or certifications does MAPLAD36KP70CAE3 comply with?
- MAPLAD36KP70CAE3 may comply with industry standards such as IEC 61000-4-5 for surge immunity and may have relevant certifications for use in specific applications.
Where can I find detailed technical specifications and application notes for MAPLAD36KP70CAE3?
- Detailed technical specifications and application notes for MAPLAD36KP70CAE3 can be found on the manufacturer's website or in the product datasheet, providing comprehensive information for integrating it into technical solutions.