Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MAPLAD6.5KP17CA
자세히보기 데이터시트

MAPLAD6.5KP17CA

Introduction

The MAPLAD6.5KP17CA belongs to the category of transient voltage suppressor (TVS) diodes and is widely used for surge protection in various electronic circuits. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MAPLAD6.5KP17CA.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Surge protection in electronic circuits
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: DO-203AB (DO-5)
  • Essence: Silicon TVS Diode
  • Packaging/Quantity: Available in reels or bulk packaging

Specifications

  • Peak Pulse Power: 6500 W
  • Standoff Voltage: 17 V
  • Breakdown Voltage: 18.9 V to 21 V
  • Maximum Clamping Voltage: 27.4 V
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The MAPLAD6.5KP17CA typically has two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.

Functional Features

  • Provides protection against voltage transients
  • Fast response time to clamp transient voltages
  • Low leakage current
  • High surge capability

Advantages and Disadvantages

Advantages

  • Effective surge protection
  • Fast response time
  • Low clamping voltage

Disadvantages

  • Limited to specific voltage ranges
  • May require additional circuitry for comprehensive protection

Working Principles

When a transient voltage spike occurs in the circuit, the TVS diode conducts and clamps the voltage to a safe level, protecting the downstream components from damage.

Detailed Application Field Plans

The MAPLAD6.5KP17CA is commonly used in: - Power supplies - Communication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • Alternative Model 1: MAPLAD6.5KP15CA (Peak Pulse Power: 6500 W, Standoff Voltage: 15 V)
  • Alternative Model 2: MAPLAD6.5KP20CA (Peak Pulse Power: 6500 W, Standoff Voltage: 20 V)
  • Alternative Model 3: MAPLAD6.5KP24CA (Peak Pulse Power: 6500 W, Standoff Voltage: 24 V)

In conclusion, the MAPLAD6.5KP17CA is a high-performance TVS diode that offers effective surge protection and fast response time, making it suitable for a wide range of electronic applications.

[Word count: 394]

기술 솔루션에 MAPLAD6.5KP17CA 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure, here are 10 common questions and answers related to the application of MAPLAD6.5KP17CA in technical solutions:

  1. What is MAPLAD6.5KP17CA?

    • MAPLAD6.5KP17CA is a type of transient voltage suppressor diode designed to protect electronic circuits from overvoltage transients.

  2. What are the key features of MAPLAD6.5KP17CA?

    • The key features include a peak pulse power of 6.5 kilowatts, a breakdown voltage of 17 volts, and fast response time.

  3. Where can MAPLAD6.5KP17CA be used in technical solutions?

    • MAPLAD6.5KP17CA can be used in various technical solutions such as power supplies, automotive electronics, industrial equipment, and telecommunications systems.

  4. How does MAPLAD6.5KP17CA protect electronic circuits?

    • MAPLAD6.5KP17CA protects electronic circuits by diverting excessive current away from sensitive components when a voltage surge occurs.

  5. What are the typical applications of MAPLAD6.5KP17CA in power supplies?

    • In power supplies, MAPLAD6.5KP17CA is commonly used to protect against voltage spikes and surges that could damage sensitive components.

  6. Can MAPLAD6.5KP17CA be used in automotive electronics?

    • Yes, MAPLAD6.5KP17CA is suitable for use in automotive electronics to safeguard against voltage transients caused by factors such as load dump and jump starts.

  7. What is the operating temperature range of MAPLAD6.5KP17CA?

    • The operating temperature range typically extends from -55°C to 175°C, making it suitable for a wide range of environments.

  8. Does MAPLAD6.5KP17CA require any external components for proper operation?

    • MAPLAD6.5KP17CA may require additional circuitry such as resistors or capacitors for optimal performance in specific applications.

  9. Are there any reliability certifications associated with MAPLAD6.5KP17CA?

    • Yes, MAPLAD6.5KP17CA may have certifications such as AEC-Q101 qualification for automotive applications and compliance with industry standards like RoHS.

  10. What are the recommended mounting and handling practices for MAPLAD6.5KP17CA?

    • It is recommended to follow proper ESD precautions during handling and to mount the device using appropriate techniques such as through-hole or surface mount methods.

I hope these questions and answers provide a good overview of the application of MAPLAD6.5KP17CA in technical solutions. Let me know if you need further information!