MPLAD36KP110AE3 Encyclopedia Entry
Product Overview
The MPLAD36KP110AE3 belongs to the category of transient voltage suppressor diodes. These diodes are commonly used to protect sensitive electronic components from voltage spikes and transients. The MPLAD36KP110AE3 is designed to exhibit high surge capability, low clamping voltage, and fast response time. It is typically packaged in a compact, surface-mount package and is available in various quantities per package.
Basic Information
- Category: Transient Voltage Suppressor Diode
- Use: Protection against voltage spikes and transients
- Characteristics: High surge capability, low clamping voltage, fast response time
- Package: Surface-mount package
- Essence: Protecting sensitive electronic components
- Packaging/Quantity: Available in various quantities per package
Specifications
The MPLAD36KP110AE3 features a breakdown voltage of 110V, with a peak pulse power dissipation of [insert value] watts. It has a low maximum clamping voltage and a fast response time, making it suitable for applications requiring robust transient voltage protection.
Detailed Pin Configuration
The MPLAD36KP110AE3 follows a standard diode pin configuration, with clear markings for anode, cathode, and other relevant terminals. Refer to the datasheet for specific details.
Functional Features
- Transient Voltage Suppression: Effectively clamps transient voltages to protect downstream components.
- Fast Response Time: Rapid reaction to voltage spikes ensures minimal impact on the protected circuitry.
- High Surge Capability: Capable of withstanding high surge currents without degradation.
Advantages and Disadvantages
Advantages
- Effective protection against voltage spikes and transients
- Fast response time
- High surge capability
Disadvantages
- May exhibit some leakage current in certain operating conditions
- Sensitive to reverse polarity connection
Working Principles
The MPLAD36KP110AE3 operates by diverting excessive transient currents away from sensitive components, thereby limiting the voltage across them. This is achieved through the use of semiconductor junctions that rapidly conduct when subjected to high voltages.
Detailed Application Field Plans
The MPLAD36KP110AE3 is widely used in various electronic systems where protection against voltage surges is critical. Common applications include: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
- MPLAD36KP120AE3: Similar characteristics with a higher breakdown voltage of 120V
- MPLAD36KP100AE3: Lower breakdown voltage of 100V, suitable for applications with lower voltage requirements
In conclusion, the MPLAD36KP110AE3 transient voltage suppressor diode offers robust protection against voltage spikes and transients, making it an essential component in numerous electronic systems.
Word Count: [insert word count]
기술 솔루션에 MPLAD36KP110AE3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is MPLAD36KP110AE3?
- MPLAD36KP110AE3 is a high-performance transient voltage suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
What are the key features of MPLAD36KP110AE3?
- The key features of MPLAD36KP110AE3 include a peak pulse power dissipation of 110kW, low clamping voltage, fast response time, and high surge current capability.
How is MPLAD36KP110AE3 used in technical solutions?
- MPLAD36KP110AE3 is commonly used in technical solutions to provide overvoltage protection for sensitive electronic components and circuits, such as in power supplies, communication systems, industrial equipment, and automotive electronics.
What are the typical applications of MPLAD36KP110AE3?
- Typical applications of MPLAD36KP110AE3 include surge protection in data lines, power buses, and signal lines, as well as in transient voltage suppression for electronic equipment and systems.
What standards does MPLAD36KP110AE3 comply with?
- MPLAD36KP110AE3 complies with industry standards such as IEC 61000-4-5 for surge immunity and AEC-Q101 for automotive-grade reliability.
What are the environmental specifications of MPLAD36KP110AE3?
- MPLAD36KP110AE3 is designed to operate in a wide temperature range and is compliant with RoHS and REACH directives for environmental sustainability.
How does MPLAD36KP110AE3 contribute to system reliability?
- MPLAD36KP110AE3 enhances system reliability by diverting damaging transient currents away from sensitive components, thereby preventing equipment damage and downtime.
Can MPLAD36KP110AE3 be used in harsh environments?
- Yes, MPLAD36KP110AE3 is suitable for use in harsh environments due to its rugged construction and high surge current handling capability.
What are the packaging options available for MPLAD36KP110AE3?
- MPLAD36KP110AE3 is available in various package options, including surface mount and through-hole configurations, to accommodate different assembly requirements.
Where can I find detailed technical specifications and application notes for MPLAD36KP110AE3?
- Detailed technical specifications and application notes for MPLAD36KP110AE3 can be found on the manufacturer's website or by contacting their technical support team.