Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MX15KP33CAE3
자세히보기 데이터시트

MX15KP33CAE3

Introduction

MX15KP33CAE3 is a high-performance transient voltage suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: TVS Diode
  • Use: Protection against voltage transients
  • Characteristics: High performance, low clamping voltage, fast response time
  • Package: DO-201AE
  • Essence: Silicon TVS Diode
  • Packaging/Quantity: Tape & Reel, 500 units per reel

Specifications

  • Peak Pulse Power: 15000W
  • Standoff Voltage: 33V
  • Breakdown Voltage: 36.7V
  • Clamping Voltage: 53.3V
  • Peak Pulse Current: 227.3A
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The MX15KP33CAE3 TVS diode has a standard DO-201AE package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Fast response time to transient voltage events
  • Low clamping voltage to protect sensitive electronics
  • High peak pulse power handling capability
  • Robust construction for reliability in harsh environments

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • High peak pulse power handling capacity
  • Wide operating temperature range

Disadvantages

  • Relatively large package size compared to some SMD alternatives
  • Higher clamping voltage compared to some specialized TVS diodes

Working Principles

When a transient voltage event occurs, the MX15KP33CAE3 TVS diode rapidly conducts, diverting the excess energy away from the protected circuit. This action limits the voltage across the circuit to a safe level, protecting the downstream components from damage.

Detailed Application Field Plans

The MX15KP33CAE3 is suitable for a wide range of applications requiring protection against transient voltage events, including: - Power supplies - Communication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • MX10KP33CAE3: Lower peak pulse power rating
  • MX15KP36CAE3: Higher standoff voltage
  • MX15KP33A: Axial lead package alternative

In conclusion, the MX15KP33CAE3 TVS diode offers robust transient voltage protection for a variety of electronic applications, with high peak pulse power handling and fast response time. While it has certain limitations, its performance characteristics make it a reliable choice for many design scenarios.

[Word Count: 411]

기술 솔루션에 MX15KP33CAE3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is MX15KP33CAE3 and what is its application in technical solutions?

    • MX15KP33CAE3 is a transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and transients. It is commonly used in technical solutions to safeguard circuits from damage due to overvoltage events.

  2. What is the maximum clamping voltage of MX15KP33CAE3?

    • The maximum clamping voltage of MX15KP33CAE3 is 53.3V at 100A.

  3. What are the typical applications of MX15KP33CAE3 in technical solutions?

    • MX15KP33CAE3 is often used in surge protection for power supplies, telecommunications equipment, industrial controls, and automotive electronics.

  4. What is the peak pulse power rating of MX15KP33CAE3?

    • The peak pulse power rating of MX15KP33CAE3 is 15000W for a 10/1000μs waveform.

  5. How does MX15KP33CAE3 provide protection in technical solutions?

    • MX15KP33CAE3 diverts excessive current away from sensitive components by clamping the voltage during transient events, thereby protecting the circuitry from damage.

  6. Is MX15KP33CAE3 suitable for high-speed data line protection?

    • Yes, MX15KP33CAE3 is suitable for high-speed data line protection due to its fast response time and low capacitance.

  7. What are the environmental specifications of MX15KP33CAE3?

    • MX15KP33CAE3 is compliant with RoHS and REACH directives, making it suitable for use in environmentally conscious technical solutions.

  8. Can MX15KP33CAE3 be used in automotive applications?

    • Yes, MX15KP33CAE3 is suitable for automotive applications where protection against voltage transients is required.

  9. Does MX15KP33CAE3 require any external components for proper operation?

    • MX15KP33CAE3 does not require any external components for basic transient voltage suppression, but appropriate circuit design and layout considerations are recommended for optimal performance.

  10. What are the packaging options available for MX15KP33CAE3?

    • MX15KP33CAE3 is available in various package types, including DO-203AB (DO-30), providing flexibility for different mounting and assembly requirements in technical solutions.