Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MX5KP5.0CA
자세히보기 데이터시트

MX5KP5.0CA

Introduction

MX5KP5.0CA is a diode belonging to the category of transient voltage suppressors (TVS). This device is designed to protect sensitive electronics from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage transients
  • Characteristics: Fast response time, low clamping voltage, high surge capability
  • Package: DO-214AC (SMA), DO-15, SMC, SMB, or other surface mount packages
  • Essence: Provides a low-impedance path for transient currents to flow to ground
  • Packaging/Quantity: Available in tape and reel packaging, with quantities varying based on manufacturer specifications

Specifications

  • Peak Pulse Power: 5000W
  • Standoff Voltage: 5.0V
  • Breakdown Voltage Range: 6.40V to 7.00V
  • Maximum Clamping Voltage: 9.2V at 100A
  • Operating Temperature Range: -55°C to 150°C
  • Storage Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The MX5KP5.0CA typically features two pins in a standard diode configuration. The pinout may vary slightly based on the specific package type chosen.

Functional Features

  • Rapid response to transient voltage events
  • Low clamping voltage to minimize stress on protected components
  • High surge capability for reliable protection in harsh environments

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • Wide operating temperature range

Disadvantages

  • May require additional circuitry for comprehensive overvoltage protection
  • Limited to specific voltage ranges

Working Principles

When a transient voltage event occurs, the MX5KP5.0CA provides a low-impedance path to divert excess current away from sensitive components. This action limits the voltage across the protected circuit, safeguarding it from damage.

Detailed Application Field Plans

MX5KP5.0CA is commonly used in various electronic systems, including: - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics - Power supplies

Detailed and Complete Alternative Models

  • Alternative Model 1: MX5KP6.0CA (6.0V Standoff Voltage)
  • Alternative Model 2: MX5KP7.0CA (7.0V Standoff Voltage)
  • Alternative Model 3: MX5KP8.0CA (8.0V Standoff Voltage)

In conclusion, MX5KP5.0CA serves as a crucial component in protecting electronic devices from transient voltage events. Its fast response time, low clamping voltage, and high surge capability make it an essential part of many electronic systems.

[Word Count: 398]

기술 솔루션에 MX5KP5.0CA 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is MX5KP5.0CA?

    • MX5KP5.0CA is a high-voltage diode array designed for ESD and surge protection applications in sensitive electronics.

  2. What are the key features of MX5KP5.0CA?

    • The key features include a peak pulse power of 5000W, low clamping voltage, fast response time, and compatibility with automated placement equipment.

  3. Where can MX5KP5.0CA be used in technical solutions?

    • MX5KP5.0CA can be used in various technical solutions such as power supplies, telecommunications equipment, industrial controls, and automotive electronics.

  4. How does MX5KP5.0CA provide ESD protection?

    • MX5KP5.0CA provides ESD protection by diverting transient surges and high-voltage spikes away from sensitive components, thereby safeguarding them from damage.

  5. What is the operating temperature range of MX5KP5.0CA?

    • MX5KP5.0CA typically operates within a temperature range of -55°C to +175°C, making it suitable for diverse environmental conditions.

  6. Can MX5KP5.0CA be used in combination with other protective components?

    • Yes, MX5KP5.0CA can be used in conjunction with other protective components such as varistors and gas discharge tubes to create comprehensive protection solutions.

  7. Does MX5KP5.0CA require any special handling during assembly?

    • MX5KP5.0CA is designed for compatibility with automated placement equipment, simplifying the assembly process and reducing the need for special handling.

  8. What certifications or standards does MX5KP5.0CA comply with?

    • MX5KP5.0CA complies with industry standards such as IEC 61000-4-2 for ESD protection and is often certified to meet RoHS and REACH requirements.

  9. Are there any application notes or design guidelines available for using MX5KP5.0CA?

    • Yes, detailed application notes and design guidelines are provided by the manufacturer to assist engineers in integrating MX5KP5.0CA effectively into their technical solutions.

  10. What are the typical failure modes of MX5KP5.0CA and how can they be mitigated?

    • Typical failure modes include thermal runaway and degradation due to prolonged exposure to high currents. These can be mitigated by proper heat sinking and current-limiting circuitry in the application design.