Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MXL15KP90A
자세히보기 데이터시트

MXL15KP90A Product Overview

Introduction

The MXL15KP90A is a high-performance electronic component designed for use in power supply and voltage regulation applications. This product belongs to the category of voltage regulators and is known for its exceptional characteristics, packaging, and functional features.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Power supply and voltage regulation
  • Characteristics: High efficiency, low noise, precise voltage regulation
  • Package: TO-220
  • Essence: Reliable voltage regulation for various electronic devices
  • Packaging/Quantity: Typically available in reels of 1000 units

Specifications

  • Input Voltage Range: 4.5V to 25V
  • Output Voltage Range: 1.25V to 20V
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 1.3V at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The MXL15KP90A features a standard TO-220 pin configuration with three pins: 1. Pin 1 (Input): Connects to the input voltage source 2. Pin 2 (Ground): Connected to the ground reference 3. Pin 3 (Output): Provides the regulated output voltage

Functional Features

  • Precision Regulation: Ensures stable output voltage under varying load conditions
  • Overcurrent Protection: Safeguards the regulator and connected components from excessive current
  • Thermal Shutdown: Prevents overheating by shutting down the regulator at high temperatures
  • Low Dropout Voltage: Enables efficient operation even with small voltage differentials

Advantages and Disadvantages

Advantages

  • High efficiency
  • Compact package
  • Wide input voltage range

Disadvantages

  • Limited maximum output current
  • Requires heat sinking for high-power applications

Working Principles

The MXL15KP90A operates on the principle of feedback control, where an internal error amplifier compares the actual output voltage to a reference voltage and adjusts the pass transistor to maintain the desired output voltage.

Detailed Application Field Plans

The MXL15KP90A is well-suited for a wide range of applications, including: - Battery-powered devices - Industrial automation systems - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

  • MXL20KP110B: Higher current handling capacity
  • MXL10KP75C: Lower dropout voltage for ultra-low power applications
  • MXL30KP150D: Extended input voltage range for industrial applications

In conclusion, the MXL15KP90A offers reliable voltage regulation in a compact package, making it an ideal choice for various electronic devices and systems.

Word Count: 410

기술 솔루션에 MXL15KP90A 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum operating temperature of MXL15KP90A?

    • The maximum operating temperature of MXL15KP90A is 150°C.

  2. What is the breakdown voltage of MXL15KP90A?

    • The breakdown voltage of MXL15KP90A is 90V.

  3. What is the typical application of MXL15KP90A in technical solutions?

    • MXL15KP90A is commonly used for overvoltage protection in various electronic circuits and systems.

  4. What is the peak pulse power handling capability of MXL15KP90A?

    • MXL15KP90A can handle peak pulse power up to 15,000 watts.

  5. Is MXL15KP90A suitable for surge protection in power supply units?

    • Yes, MXL15KP90A is suitable for surge protection in power supply units due to its high power handling capability.

  6. Does MXL15KP90A require a heat sink for proper operation?

    • Yes, MXL15KP90A may require a heat sink to dissipate heat effectively, especially in high-power applications.

  7. Can MXL15KP90A be used in automotive electronics for transient voltage suppression?

    • Yes, MXL15KP90A is suitable for transient voltage suppression in automotive electronics due to its robust design.

  8. What are the recommended mounting and soldering techniques for MXL15KP90A?

    • MXL15KP90A is typically mounted using through-hole technology and requires proper soldering techniques to ensure reliable connections.

  9. Is MXL15KP90A compliant with industry standards for surge protection devices?

    • Yes, MXL15KP90A is designed to meet industry standards for surge protection devices, ensuring its reliability and performance.

  10. Are there any specific precautions to consider when integrating MXL15KP90A into a technical solution?

    • It's important to consider proper PCB layout, thermal management, and electrical isolation when integrating MXL15KP90A to maximize its effectiveness and longevity.