Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MXLP6KE91CAE3
자세히보기 데이터시트

MXLP6KE91CAE3 Product Overview

Introduction

The MXLP6KE91CAE3 is a crucial component in the field of electronic devices, offering a wide range of applications and functionalities. This entry will provide an in-depth overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Surge Protection
  • Characteristics: High energy absorption, fast response time
  • Package: Axial Lead
  • Essence: Transient Voltage Suppressor (TVS) Diode
  • Packaging/Quantity: Bulk packaging, quantity varies based on supplier

Specifications

  • Voltage Rating: 6V
  • Power Dissipation: 600W
  • Breakdown Voltage: 6.67V
  • Clamping Voltage: 10.3V
  • Peak Pulse Current: 34.8A
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The MXLP6KE91CAE3 features an axial lead package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Transient Voltage Suppression: Provides protection against voltage spikes and transients.
  • Fast Response Time: Rapidly clamps transient voltages to safe levels.
  • High Energy Absorption: Capable of dissipating high surge currents without damage.

Advantages and Disadvantages

Advantages

  • Effective surge protection for sensitive electronic components
  • Fast response time ensures minimal impact on protected circuits
  • High energy absorption capacity for robust protection

Disadvantages

  • Limited to specific voltage and power ratings
  • Requires proper installation and circuit design for optimal performance

Working Principles

The MXLP6KE91CAE3 operates by diverting excessive transient currents away from sensitive electronic circuits, thereby safeguarding them from potential damage. When a transient voltage spike occurs, the diode rapidly conducts, shunting the excess energy to ground and limiting the voltage across the protected circuit.

Detailed Application Field Plans

The MXLP6KE91CAE3 finds extensive use in various applications, including: - Consumer Electronics: Protects integrated circuits, microcontrollers, and other sensitive components in electronic devices. - Telecommunications: Safeguards communication equipment from voltage surges and transients. - Automotive Electronics: Provides surge protection for vehicle electronics and onboard systems.

Detailed and Complete Alternative Models

Several alternative models offer similar surge protection capabilities, including: - MXLP6KE82CAE3: Lower voltage rating with comparable power dissipation - MXLP6KE100CAE3: Higher voltage rating for increased protection levels - MXLP6KE120CAE3: Enhanced power dissipation for higher surge handling capacity

In conclusion, the MXLP6KE91CAE3 serves as a critical component in ensuring the reliability and longevity of electronic devices by effectively mitigating the impact of transient voltage events. Its robust surge protection capabilities, fast response time, and versatile applications make it an indispensable asset in the realm of electronic circuit protection.

Word Count: 443

기술 솔루션에 MXLP6KE91CAE3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is MXLP6KE91CAE3?

    • MXLP6KE91CAE3 is a type of transient voltage suppressor diode used to protect electronic circuits from overvoltage transients.

  2. What are the key features of MXLP6KE91CAE3?

    • The key features include a peak pulse power of 600W, low clamping voltage, fast response time, and high surge current capability.

  3. In what applications can MXLP6KE91CAE3 be used?

    • MXLP6KE91CAE3 is commonly used in various technical solutions such as power supplies, automotive electronics, industrial equipment, and telecommunications systems for surge protection.

  4. How does MXLP6KE91CAE3 provide overvoltage protection?

    • MXLP6KE91CAE3 operates by diverting excessive voltage transients away from sensitive components, thereby limiting the voltage across the protected circuit.

  5. What is the maximum voltage rating of MXLP6KE91CAE3?

    • MXLP6KE91CAE3 has a maximum voltage rating of 77.4V, making it suitable for protecting circuits operating within this voltage range.

  6. Can MXLP6KE91CAE3 be used for ESD protection?

    • Yes, MXLP6KE91CAE3 can also provide electrostatic discharge (ESD) protection for sensitive electronic components.

  7. What is the typical response time of MXLP6KE91CAE3?

    • The typical response time of MXLP6KE91CAE3 is very fast, typically in the nanosecond range, ensuring rapid protection against voltage transients.

  8. Are there any specific mounting or handling considerations for MXLP6KE91CAE3?

    • MXLP6KE91CAE3 should be mounted close to the protected circuit and handled with appropriate ESD precautions to avoid damage during installation.

  9. What are the environmental specifications of MXLP6KE91CAE3?

    • MXLP6KE91CAE3 is designed to meet industry standards for temperature, humidity, and reliability, making it suitable for a wide range of operating environments.

  10. Where can MXLP6KE91CAE3 be sourced from?

    • MXLP6KE91CAE3 can be sourced from authorized distributors, electronic component suppliers, or directly from the manufacturer's official channels.