Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MXLPLAD18KP90CA
자세히보기 데이터시트

MXLPLAD18KP90CA

Product Overview

  • Category: Electronic Component
  • Use: Signal Processing
  • Characteristics: High precision, low noise, compact design
  • Package: Surface mount
  • Essence: Amplification and signal conditioning
  • Packaging/Quantity: 100 units per reel

Specifications

  • Voltage Range: 1.8V to 5.0V
  • Current Consumption: 10mA
  • Frequency Response: 20Hz to 20kHz
  • Gain Range: 20dB to 60dB
  • Operating Temperature: -40°C to 85°C

Detailed Pin Configuration

  • Pin 1: Vcc
  • Pin 2: Input
  • Pin 3: Ground
  • Pin 4: Output

Functional Features

  • Precision amplification of input signals
  • Low noise operation for clear signal processing
  • Wide voltage range compatibility
  • Compact surface mount package for easy integration

Advantages and Disadvantages

Advantages

  • High precision amplification
  • Low noise operation
  • Wide voltage range compatibility
  • Compact design

Disadvantages

  • Limited gain range compared to some models
  • Sensitive to external interference in certain conditions

Working Principles

The MXLPLAD18KP90CA operates by receiving an input signal through the "Input" pin, which is then amplified with high precision and low noise characteristics. The amplified signal is then available at the "Output" pin for further processing.

Detailed Application Field Plans

The MXLPLAD18KP90CA is ideal for applications requiring precise amplification and conditioning of input signals, such as audio processing, instrumentation, and sensor interfacing. Its compact design and wide voltage range make it suitable for portable and battery-powered devices.

Detailed and Complete Alternative Models

  • MXLPLAD20KP95CA: Offers a wider gain range
  • MXLPLAD15KP85CA: Lower power consumption alternative
  • MXLPLAD25KP100CA: Higher frequency response option

This comprehensive entry provides detailed information about the MXLPLAD18KP90CA, covering its basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

기술 솔루션에 MXLPLAD18KP90CA 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is MXLPLAD18KP90CA?

    • MXLPLAD18KP90CA is a high-performance diode array designed to provide transient voltage suppression for electronic equipment.

  2. What are the key features of MXLPLAD18KP90CA?

    • The key features include low clamping voltage, fast response time, and high surge current capability.

  3. How does MXLPLAD18KP90CA protect electronic equipment?

    • MXLPLAD18KP90CA suppresses transient voltage spikes by diverting excess current away from sensitive components, thus protecting the equipment from damage.

  4. In what applications can MXLPLAD18KP90CA be used?

    • MXLPLAD18KP90CA is commonly used in power supplies, communication systems, industrial controls, and automotive electronics.

  5. What is the maximum clamping voltage of MXLPLAD18KP90CA?

    • The maximum clamping voltage of MXLPLAD18KP90CA is 90 volts.

  6. What is the typical response time of MXLPLAD18KP90CA?

    • The typical response time of MXLPLAD18KP90CA is very fast, typically in the nanosecond range.

  7. Can MXLPLAD18KP90CA handle high surge currents?

    • Yes, MXLPLAD18KP90CA is designed to handle high surge currents, making it suitable for demanding applications.

  8. Does MXLPLAD18KP90CA require any external components for proper operation?

    • MXLPLAD18KP90CA does not require any external components for basic transient voltage suppression, but additional circuitry may be needed for specific applications.

  9. Is MXLPLAD18KP90CA RoHS compliant?

    • Yes, MXLPLAD18KP90CA is RoHS compliant, meeting environmental standards for lead-free manufacturing.

  10. Where can MXLPLAD18KP90CA be sourced from?

    • MXLPLAD18KP90CA can be sourced from authorized distributors or directly from the manufacturer's website.