MXP4KE75CAE3 Encyclopedia Entry

Product Overview

Use

It is used for protecting sensitive electronic equipment from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.

Characteristics

High power handling capability
Fast response time
Low clamping voltage
RoHS compliant

Package

The MXP4KE75CAE3 is typically available in a DO-214AC (SMA) package.

Essence

The essence of the MXP4KE75CAE3 is to provide robust protection against transient voltage events to ensure the reliability and longevity of electronic devices.

Packaging/Quantity

It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

Peak Power Dissipation: 4000W
Breakdown Voltage: 64.5V to 71.5V
Maximum Clamping Voltage: 104V at 10A
Operating Temperature Range: -55°C to 175°C
Storage Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The MXP4KE75CAE3 TVS diode typically has two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.

Functional Features

Bi-directional clamping capability
Low incremental surge resistance
High temperature stability
Excellent clamping capability

Advantages and Disadvantages

Advantages

Robust protection against transient voltage events
High power handling capability
Fast response time

Disadvantages

Higher cost compared to lower power TVS diodes
Requires careful consideration of placement in circuit design

Working Principles

The MXP4KE75CAE3 operates by diverting excessive transient current away from sensitive components, thereby limiting the voltage across the protected load.

Detailed Application Field Plans

The MXP4KE75CAE3 is commonly used in the following applications: - Power supplies - Communication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the MXP4KE75CAE3 include: - P6KE75CA - 1.5KE75CA - SA75CA

In conclusion, the MXP4KE75CAE3 is a high-power TVS diode that offers robust protection against transient voltage events, making it an essential component in various electronic applications.

[Word count: 366]

기술 솔루션에 MXP4KE75CAE3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

What is MXP4KE75CAE3?
- MXP4KE75CAE3 is a type of transient voltage suppressor diode used to protect electronic circuits from voltage spikes and transients.
How does MXP4KE75CAE3 work?
- MXP4KE75CAE3 works by diverting excessive voltage away from sensitive components in a circuit, thereby preventing damage from voltage surges.
What are the typical applications of MXP4KE75CAE3?
- MXP4KE75CAE3 is commonly used in power supplies, automotive electronics, industrial equipment, and telecommunications systems to protect against voltage transients.
What is the maximum voltage rating of MXP4KE75CAE3?
- The maximum peak pulse voltage for MXP4KE75CAE3 is 75V.
What is the peak pulse power handling capability of MXP4KE75CAE3?
- MXP4KE75CAE3 can handle peak pulse power up to a specified level, typically around 400W.
How should MXP4KE75CAE3 be mounted in a circuit?
- MXP4KE75CAE3 should be mounted close to the protected circuitry and connected with short leads to minimize inductance.
What are the temperature specifications for MXP4KE75CAE3?
- MXP4KE75CAE3 typically operates within a temperature range of -55°C to +175°C.
Can MXP4KE75CAE3 be used in high-frequency applications?
- Yes, MXP4KE75CAE3 is suitable for high-frequency applications due to its fast response time and low capacitance.
Are there any specific handling precautions for MXP4KE75CAE3?
- It is important to follow proper ESD (electrostatic discharge) handling procedures when working with MXP4KE75CAE3 to prevent damage to the device.
Where can I find detailed technical specifications for MXP4KE75CAE3?
- Detailed technical specifications for MXP4KE75CAE3 can be found in the manufacturer's datasheet or product documentation.