MXP6KE8.2A
Product Overview
Category
The MXP6KE8.2A belongs to the category of transient voltage suppressor (TVS) diodes.
Use
It is used to protect sensitive electronic components from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.
Characteristics
- Fast response time
- Low clamping voltage
- High surge current capability
Package
The MXP6KE8.2A is typically available in a DO-15 package.
Essence
The essence of the MXP6KE8.2A lies in its ability to divert excessive current away from sensitive components, thereby safeguarding them from damage.
Packaging/Quantity
These diodes are commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Peak Pulse Power: 600W
- Breakdown Voltage: 8.2V
- Maximum Clamping Voltage: 14V
- Operating Temperature Range: -55°C to 175°C
Detailed Pin Configuration
The MXP6KE8.2A TVS diode typically has two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.
Functional Features
- Bi-directional protection
- Low leakage current
- High reliability
Advantages and Disadvantages
Advantages
- Provides robust protection against transient voltage events
- Fast response time ensures minimal impact on the protected circuit
- Wide operating temperature range
Disadvantages
- May require additional circuitry for optimal performance in some applications
- Limited to specific voltage ranges
Working Principles
When a transient voltage event occurs, the MXP6KE8.2A TVS diode rapidly conducts excess current to ground, limiting the voltage across the protected circuit.
Detailed Application Field Plans
The MXP6KE8.2A is commonly used in: - Telecommunication equipment - Automotive electronics - Industrial control systems - Power supplies - Consumer electronics
Detailed and Complete Alternative Models
- MXP6KE6.8A
- MXP6KE10A
- MXP6KE12A
- MXP6KE15A
In conclusion, the MXP6KE8.2A transient voltage suppressor diode offers reliable protection against transient voltage events, making it an essential component in various electronic applications.
[Word count: 314]
기술 솔루션에 MXP6KE8.2A 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the maximum peak pulse power dissipation of MXP6KE8.2A?
- The maximum peak pulse power dissipation of MXP6KE8.2A is 600 watts for a 10/1000μs waveform.
What is the breakdown voltage of MXP6KE8.2A?
- The breakdown voltage of MXP6KE8.2A is 8.2 volts.
What is the typical clamping voltage of MXP6KE8.2A?
- The typical clamping voltage of MXP6KE8.2A is 14.4 volts at 10A.
What is the operating temperature range of MXP6KE8.2A?
- The operating temperature range of MXP6KE8.2A is -55°C to +175°C.
What is the peak pulse current capability of MXP6KE8.2A?
- The peak pulse current capability of MXP6KE8.2A is 167.0A for an 8/20μs waveform.
What are the typical applications of MXP6KE8.2A?
- MXP6KE8.2A is commonly used in surge protection for sensitive electronics, such as telecommunications equipment, industrial control systems, and automotive electronics.
Does MXP6KE8.2A meet RoHS compliance?
- Yes, MXP6KE8.2A is compliant with the Restriction of Hazardous Substances (RoHS) directive.
What is the package type of MXP6KE8.2A?
- MXP6KE8.2A is available in a DO-15 package.
Is MXP6KE8.2A suitable for overvoltage protection in power supply circuits?
- Yes, MXP6KE8.2A can be used for overvoltage protection in power supply circuits to safeguard against transient voltage spikes.
What are the key features of MXP6KE8.2A that make it suitable for transient voltage suppression?
- MXP6KE8.2A offers low clamping voltage, fast response time, and high surge current capability, making it effective for transient voltage suppression in various technical solutions.