Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MXPLAD18KP22AE3
자세히보기 데이터시트

MXPLAD18KP22AE3 Product Overview

Introduction

The MXPLAD18KP22AE3 belongs to the category of transient voltage suppressor (TVS) diodes and is designed for use in electronic circuits to protect sensitive components from voltage spikes and transients. This entry provides a comprehensive overview of the MXPLAD18KP22AE3, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Protection against voltage spikes and transients in electronic circuits
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: SMC (DO-214AB)
  • Essence: Silicon TVS Diode
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Peak Pulse Power: 18000W
  • Standoff Voltage: 22V
  • Breakdown Voltage: 24.4V
  • Clamping Voltage: 35.5V
  • Peak Pulse Current: 289A
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The MXPLAD18KP22AE3 TVS diode has a standard SMC (DO-214AB) package with two pins. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • High surge capability for reliable protection
  • Low clamping voltage to minimize stress on protected circuits
  • Fast response time for rapid suppression of transients

Advantages and Disadvantages

Advantages

  • Provides robust protection against voltage spikes
  • Low clamping voltage ensures minimal impact on protected circuits
  • Fast response time for effective transient suppression

Disadvantages

  • Higher cost compared to traditional diode-based protection methods
  • Requires careful consideration of placement and routing for optimal performance

Working Principles

The MXPLAD18KP22AE3 operates by diverting excess transient current away from sensitive components when a voltage spike occurs. It achieves this through rapid conduction and clamping of the transient voltage to a safe level, thereby protecting downstream circuitry.

Detailed Application Field Plans

The MXPLAD18KP22AE3 is suitable for a wide range of applications, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • Alternative Model 1: MXPLAD15KP33AE3

    • Standoff Voltage: 15V
    • Breakdown Voltage: 16.7V
    • Peak Pulse Power: 15000W

  • Alternative Model 2: MXPLAD24KP18AE3

    • Standoff Voltage: 24V
    • Breakdown Voltage: 26.7V
    • Peak Pulse Power: 24000W

  • Alternative Model 3: MXPLAD30KP15AE3

    • Standoff Voltage: 30V
    • Breakdown Voltage: 33.3V
    • Peak Pulse Power: 30000W

In conclusion, the MXPLAD18KP22AE3 transient voltage suppressor diode offers high-performance protection against voltage spikes and transients in electronic circuits. Its robust characteristics, detailed specifications, and versatile application make it an essential component in various industries.

Word Count: 443

기술 솔루션에 MXPLAD18KP22AE3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is MXPLAD18KP22AE3?

    • MXPLAD18KP22AE3 is a high-performance transient voltage suppressor diode designed to protect sensitive electronics from voltage transients induced by lightning, ESD, and other transient voltage events.

  2. What is the maximum peak pulse power dissipation of MXPLAD18KP22AE3?

    • The maximum peak pulse power dissipation of MXPLAD18KP22AE3 is 18 kilowatts.

  3. What is the breakdown voltage of MXPLAD18KP22AE3?

    • The breakdown voltage of MXPLAD18KP22AE3 is 22 volts.

  4. What are the typical applications of MXPLAD18KP22AE3?

    • MXPLAD18KP22AE3 is commonly used in surge protection for telecommunications equipment, industrial control systems, automotive electronics, and power supplies.

  5. What is the response time of MXPLAD18KP22AE3?

    • The response time of MXPLAD18KP22AE3 is very fast, typically in the picosecond range, providing rapid protection against transient voltage events.

  6. Is MXPLAD18KP22AE3 RoHS compliant?

    • Yes, MXPLAD18KP22AE3 is RoHS compliant, making it suitable for use in environmentally conscious applications.

  7. What is the operating temperature range of MXPLAD18KP22AE3?

    • MXPLAD18KP22AE3 has an operating temperature range of -55°C to +175°C, allowing it to function reliably in a wide range of environments.

  8. Does MXPLAD18KP22AE3 require any external components for proper operation?

    • MXPLAD18KP22AE3 does not require any external components for proper operation, simplifying its integration into technical solutions.

  9. What is the packaging type of MXPLAD18KP22AE3?

    • MXPLAD18KP22AE3 is available in a surface mount package, making it suitable for automated assembly processes.

  10. Is MXPLAD18KP22AE3 suitable for high-speed data lines?

    • Yes, MXPLAD18KP22AE3 is suitable for protecting high-speed data lines such as USB, Ethernet, and HDMI interfaces due to its fast response time and low capacitance.