Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MXSMCJLCE11AE3
자세히보기 데이터시트

MXSMCJLCE11AE3 Product Overview

Introduction

The MXSMCJLCE11AE3 belongs to the category of transient voltage suppressor diodes and is commonly used for surge protection in electronic circuits. This entry provides a comprehensive overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diodes
  • Use: Surge protection in electronic circuits
  • Characteristics: Fast response time, low clamping voltage, high surge current capability
  • Package: SMC (DO-214AB)
  • Essence: Protects sensitive electronic components from voltage transients
  • Packaging/Quantity: Available in reels or bulk packaging, quantity varies by manufacturer

Specifications

  • Voltage Rating: 11V
  • Peak Pulse Power: 1500W
  • Operating Temperature Range: -55°C to +150°C
  • Storage Temperature Range: -55°C to +175°C
  • RoHS Compliance: Yes

Detailed Pin Configuration

The MXSMCJLCE11AE3 follows the standard SMC (DO-214AB) package configuration with two leads.

Functional Features

  • Transient Voltage Suppression: Provides protection against voltage transients induced by lightning, ESD, or electrical noise.
  • Fast Response Time: Quickly clamps transient voltages to safe levels, protecting downstream components.
  • Low Clamping Voltage: Limits the voltage across the protected circuit during transient events.

Advantages and Disadvantages

Advantages

  • Effective surge protection for sensitive electronic components
  • Fast response time ensures minimal impact on circuit operation
  • RoHS compliant, environmentally friendly

Disadvantages

  • Limited to specific voltage ratings, may require multiple devices for broader protection range
  • Higher cost compared to traditional diode-based protection methods

Working Principles

The MXSMCJLCE11AE3 operates by diverting excess transient current away from sensitive components, thereby limiting the voltage across the circuit. When a transient event occurs, the diode rapidly switches into its low-impedance state, effectively shunting the excess energy to ground.

Detailed Application Field Plans

The MXSMCJLCE11AE3 is widely used in various applications requiring surge protection, including: - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics - Power supplies

Detailed and Complete Alternative Models

  • MXSMCJLCE6.5AE3: 6.5V voltage rating, 1500W peak pulse power
  • MXSMCJLCE15AE3: 15V voltage rating, 1500W peak pulse power
  • MXSMCJLCE24AE3: 24V voltage rating, 1500W peak pulse power

In conclusion, the MXSMCJLCE11AE3 transient voltage suppressor diode offers effective surge protection with fast response times and low clamping voltages. Its application spans across various industries, and it has several alternative models catering to different voltage requirements.

Word Count: 443

기술 솔루션에 MXSMCJLCE11AE3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is MXSMCJLCE11AE3?

    • MXSMCJLCE11AE3 is a transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and transients.

  2. What are the key features of MXSMCJLCE11AE3?

    • The key features include a high surge capability, low clamping voltage, and fast response time.

  3. What applications is MXSMCJLCE11AE3 suitable for?

    • MXSMCJLCE11AE3 is commonly used in power supplies, communication systems, automotive electronics, and industrial equipment to protect against voltage surges and transients.

  4. What is the maximum clamping voltage of MXSMCJLCE11AE3?

    • The maximum clamping voltage of MXSMCJLCE11AE3 is typically around 18.2V at 10A.

  5. How does MXSMCJLCE11AE3 provide protection?

    • MXSMCJLCE11AE3 diverts excessive current away from sensitive components by providing a low-impedance path to ground during voltage surges.

  6. What is the operating temperature range of MXSMCJLCE11AE3?

    • MXSMCJLCE11AE3 is designed to operate within a temperature range of -55°C to 150°C.

  7. Is MXSMCJLCE11AE3 RoHS compliant?

    • Yes, MXSMCJLCE11AE3 is compliant with the Restriction of Hazardous Substances (RoHS) directive.

  8. What is the package type of MXSMCJLCE11AE3?

    • MXSMCJLCE11AE3 is available in a surface mount DO-214AB package.

  9. Can MXSMCJLCE11AE3 be used for ESD protection?

    • Yes, MXSMCJLCE11AE3 can be used for electrostatic discharge (ESD) protection in various electronic devices.

  10. Are there any recommended layout considerations for using MXSMCJLCE11AE3?

    • It is recommended to minimize the length of traces between the protected component and the MXSMCJLCE11AE3, and to ensure a low-impedance connection to ground for optimal performance.