NXP USA Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MC56F82723VFM
자세히보기 데이터시트

MC56F82723VFM

Product Overview

Category

MC56F82723VFM belongs to the category of microcontrollers.

Use

It is primarily used for embedded control applications.

Characteristics

  • High-performance microcontroller
  • Low power consumption
  • Integrated peripherals for various applications
  • Real-time control capabilities

Package

MC56F82723VFM comes in a compact and durable package suitable for electronic devices.

Essence

The essence of MC56F82723VFM lies in its ability to provide efficient and reliable control for embedded systems.

Packaging/Quantity

The product is typically packaged individually and is available in various quantities depending on the manufacturer's specifications.

Specifications

  • Architecture: 16-bit Digital Signal Controller (DSC)
  • CPU Speed: Up to 60 MHz
  • Flash Memory: Up to 128 KB
  • RAM: Up to 8 KB
  • Operating Voltage: 2.7V to 5.5V
  • Number of I/O Pins: 48
  • Communication Interfaces: UART, SPI, I2C, CAN
  • Analog-to-Digital Converter (ADC): 12-bit, up to 16 channels
  • Timers: Multiple timers with various functionalities

Detailed Pin Configuration

The MC56F82723VFM microcontroller has a total of 48 pins. The pin configuration is as follows:

  • Pins 1-8: Port A (GPIO or peripheral functions)
  • Pins 9-16: Port B (GPIO or peripheral functions)
  • Pins 17-24: Port C (GPIO or peripheral functions)
  • Pins 25-32: Port D (GPIO or peripheral functions)
  • Pins 33-40: Port E (GPIO or peripheral functions)
  • Pins 41-48: Power supply and ground pins

Functional Features

  • High-speed processing capabilities
  • Enhanced control algorithms for real-time applications
  • Integrated peripherals for communication and data acquisition
  • Flexible input/output configurations
  • Low power consumption modes for energy efficiency

Advantages and Disadvantages

Advantages

  • High-performance microcontroller suitable for demanding applications
  • Versatile communication interfaces for seamless integration with other devices
  • Efficient power management options for optimized energy consumption
  • Extensive range of integrated peripherals for enhanced functionality

Disadvantages

  • Limited memory capacity compared to some other microcontrollers in the market
  • Higher cost compared to lower-end microcontrollers

Working Principles

MC56F82723VFM operates based on the principles of digital signal processing and real-time control. It executes instructions stored in its memory to perform various tasks, such as data acquisition, processing, and output control. The microcontroller interacts with external devices through its communication interfaces and utilizes its integrated peripherals to achieve precise control in embedded systems.

Detailed Application Field Plans

MC56F82723VFM finds applications in a wide range of fields, including but not limited to: - Industrial automation - Motor control systems - Power electronics - Automotive systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionalities to MC56F82723VFM are: - MC56F82726VFM - MC56F82728VFM - MC56F82730VFM - MC56F82732VFM

These models provide comparable performance and features, allowing users to choose the most suitable option for their specific requirements.

Word count: 511

기술 솔루션에 MC56F82723VFM 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum operating frequency of MC56F82723VFM?
    - The maximum operating frequency of MC56F82723VFM is 100 MHz.

  2. What are the key features of MC56F82723VFM?
    - MC56F82723VFM features a dual-core architecture, integrated peripherals, and enhanced control and processing capabilities.

  3. Can MC56F82723VFM be used in motor control applications?
    - Yes, MC56F82723VFM is well-suited for motor control applications due to its advanced control features and integrated peripherals.

  4. What communication interfaces are supported by MC56F82723VFM?
    - MC56F82723VFM supports various communication interfaces including SPI, I2C, UART, and CAN.

  5. Is MC56F82723VFM suitable for real-time control applications?
    - Yes, MC56F82723VFM is designed for real-time control applications with its fast response and precise timing capabilities.

  6. What development tools are available for MC56F82723VFM?
    - Development tools such as CodeWarrior IDE and Processor Expert support the development of applications for MC56F82723VFM.

  7. Can MC56F82723VFM be used in industrial automation systems?
    - Yes, MC56F82723VFM is suitable for industrial automation systems due to its robust performance and control features.

  8. What are the power management capabilities of MC56F82723VFM?
    - MC56F82723VFM features flexible power management options and low-power modes for efficient energy usage.

  9. Is MC56F82723VFM suitable for digital power supply applications?
    - Yes, MC56F82723VFM is well-suited for digital power supply applications with its advanced control and monitoring capabilities.

  10. Are there any application notes or reference designs available for MC56F82723VFM?
    - Yes, NXP provides application notes and reference designs to assist in the implementation of MC56F82723VFM in various technical solutions.