NXP USA Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MC908QC8MDRE
자세히보기 데이터시트

MC908QC8MDRE

Product Overview

Category

MC908QC8MDRE belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for control and processing purposes.

Characteristics

  • Compact size and low power consumption
  • High-performance processing capabilities
  • Integrated memory and peripherals
  • Wide operating voltage range
  • Support for various communication protocols

Package

MC908QC8MDRE is available in a small-sized package, making it suitable for space-constrained applications.

Essence

The essence of MC908QC8MDRE lies in its ability to provide efficient control and processing capabilities in a compact form factor.

Packaging/Quantity

This microcontroller is typically packaged individually and is available in various quantities depending on the manufacturer's specifications.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 8 MHz
  • Flash Memory: 8 KB
  • RAM: 512 bytes
  • Operating Voltage Range: 2.7V to 5.5V
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 4
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC908QC8MDRE microcontroller has a total of 32 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RESET - Reset input
  4. IRQ - Interrupt request input
  5. PTA0 - General-purpose I/O pin
  6. PTA1 - General-purpose I/O pin
  7. PTA2 - General-purpose I/O pin
  8. PTA3 - General-purpose I/O pin
  9. PTA4 - General-purpose I/O pin
  10. PTA5 - General-purpose I/O pin
  11. PTA6 - General-purpose I/O pin
  12. PTA7 - General-purpose I/O pin
  13. PTB0 - General-purpose I/O pin
  14. PTB1 - General-purpose I/O pin
  15. PTB2 - General-purpose I/O pin
  16. PTB3 - General-purpose I/O pin
  17. PTB4 - General-purpose I/O pin
  18. PTB5 - General-purpose I/O pin
  19. PTB6 - General-purpose I/O pin
  20. PTB7 - General-purpose I/O pin
  21. PTC0 - General-purpose I/O pin
  22. PTC1 - General-purpose I/O pin
  23. PTC2 - General-purpose I/O pin
  24. PTC3 - General-purpose I/O pin
  25. PTC4 - General-purpose I/O pin
  26. PTC5 - General-purpose I/O pin
  27. PTC6 - General-purpose I/O pin
  28. PTC7 - General-purpose I/O pin
  29. VCAP - External capacitor connection for voltage regulator
  30. XTAL - Crystal oscillator input
  31. EXTAL - Crystal oscillator output
  32. VDDA - Analog power supply voltage

Functional Features

  • High-speed processing capabilities for efficient control tasks
  • Integrated memory and peripherals for enhanced functionality
  • Support for various communication protocols enables seamless connectivity
  • Analog-to-Digital Converter (ADC) for accurate analog signal measurements
  • Timers/Counters for precise timing and event management

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs
  • Low power consumption extends battery life in portable devices
  • Wide operating voltage range provides flexibility in different power supply scenarios
  • Support for multiple communication protocols enhances connectivity options

Disadvantages

  • Limited memory capacity compared to higher-end microcontrollers
  • 8-bit architecture may not be suitable for complex computational tasks

Working Principles

MC908QC8MDRE operates based on the principles of a typical microcontroller. It executes instructions stored in its memory, interacts with peripherals and external devices, and performs control and processing tasks according to the programmed logic.

Detailed Application Field Plans

MC908QC8MDRE finds applications in various fields, including but not limited to: - Consumer electronics - Industrial automation - Automotive systems - Medical devices - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MC908QC8MDRE include: - ATmega328P by Microchip Technology Inc. - PIC16F877A by Microchip Technology Inc. - STM32F103C8T6 by STMicroelectronics

These alternatives provide comparable features and can be considered based on specific project requirements.

Word count: 550 words

기술 솔루션에 MC908QC8MDRE 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MC908QC8MDRE in technical solutions:

  1. Q: What is MC908QC8MDRE? A: MC908QC8MDRE is a microcontroller from the MC9S08QD/QE/QG family, designed for embedded control applications.

  2. Q: What are the key features of MC908QC8MDRE? A: Some key features include an 8-bit CPU core, flash memory, RAM, multiple I/O ports, timers, analog-to-digital converters, and communication interfaces.

  3. Q: What are the typical applications of MC908QC8MDRE? A: MC908QC8MDRE is commonly used in various technical solutions such as industrial automation, consumer electronics, automotive systems, and smart appliances.

  4. Q: How much flash memory does MC908QC8MDRE have? A: MC908QC8MDRE has 8 KB of flash memory, which can be used for storing program code and data.

  5. Q: Can MC908QC8MDRE communicate with other devices? A: Yes, MC908QC8MDRE supports various communication interfaces like UART, SPI, and I2C, enabling it to communicate with other devices or peripherals.

  6. Q: Does MC908QC8MDRE have any analog capabilities? A: Yes, MC908QC8MDRE has built-in analog-to-digital converters (ADCs) that allow it to interface with analog sensors or signals.

  7. Q: What is the operating voltage range of MC908QC8MDRE? A: MC908QC8MDRE operates within a voltage range of 2.7V to 5.5V, making it suitable for both battery-powered and mains-powered applications.

  8. Q: Can MC908QC8MDRE be programmed in C/C++? A: Yes, MC908QC8MDRE can be programmed using C/C++ programming languages, along with appropriate development tools and compilers.

  9. Q: Is MC908QC8MDRE suitable for real-time applications? A: Yes, MC908QC8MDRE offers features like timers and interrupt capabilities, making it suitable for real-time applications that require precise timing or event handling.

  10. Q: Are there any development boards available for MC908QC8MDRE? A: Yes, there are development boards specifically designed for MC908QC8MDRE, which provide a convenient platform for prototyping and testing applications.

Please note that the answers provided here are general and may vary depending on specific requirements and application scenarios.