NXP USA Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MKL26Z64VFT4R
자세히보기 데이터시트

MKL26Z64VFT4R

Introduction

The MKL26Z64VFT4R is a microcontroller belonging to the MKL26Z family, designed and manufactured by NXP Semiconductors. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Product Overview

  • Category: Microcontroller
  • Use: The MKL26Z64VFT4R is commonly used in embedded systems for various applications such as consumer electronics, industrial control, and Internet of Things (IoT) devices.
  • Characteristics: This microcontroller features low power consumption, high performance, and a wide range of integrated peripherals suitable for diverse applications.
  • Package: The MKL26Z64VFT4R is available in a compact and industry-standard 32-pin QFN package.
  • Essence: The essence of this microcontroller lies in its ability to provide efficient processing and control capabilities in resource-constrained embedded systems.
  • Packaging/Quantity: The MKL26Z64VFT4R is typically supplied in tape and reel packaging with a specific quantity per reel.

Specifications

  • Processor: ARM Cortex-M0+ core running at up to 48 MHz
  • Memory: 64 KB Flash, 16 KB SRAM
  • Peripherals: Integrated analog and digital peripherals including ADC, DAC, UART, SPI, I2C, and GPIO
  • Operating Voltage: 1.71 V to 3.6 V
  • Operating Temperature: -40°C to 105°C
  • Package Type: 32-pin QFN

Detailed Pin Configuration

The detailed pin configuration of the MKL26Z64VFT4R can be found in the official datasheet provided by NXP Semiconductors.

Functional Features

  • Low Power Consumption: The microcontroller is designed for energy-efficient operation, making it suitable for battery-powered applications.
  • Integrated Peripherals: A wide range of integrated peripherals allows for versatile connectivity and control options.
  • High Performance: The ARM Cortex-M0+ core provides efficient processing capabilities for various tasks.

Advantages and Disadvantages

Advantages

  • Energy-efficient design
  • Versatile integrated peripherals
  • High-performance ARM Cortex-M0+ core

Disadvantages

  • Limited memory compared to higher-end microcontrollers
  • Restricted operating temperature range

Working Principles

The MKL26Z64VFT4R operates based on the ARM Cortex-M0+ core architecture, utilizing its processing power and integrated peripherals to execute programmed tasks and interface with external components.

Detailed Application Field Plans

The MKL26Z64VFT4R is well-suited for a wide range of applications, including but not limited to: - Consumer Electronics: Remote controls, smart home devices - Industrial Control: Automation systems, motor control - IoT Devices: Sensor nodes, wearable devices

Detailed and Complete Alternative Models

  • MKL25Z128VMP4: Similar microcontroller with higher memory capacity
  • MKL27Z256VMP4: Upgraded version with extended temperature range and additional features

In conclusion, the MKL26Z64VFT4R microcontroller offers a balance of performance, power efficiency, and integrated peripherals, making it suitable for diverse embedded system applications.

Word Count: 536

기술 솔루션에 MKL26Z64VFT4R 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the MKL26Z64VFT4R microcontroller used for?

    • The MKL26Z64VFT4R microcontroller is commonly used in various technical solutions such as IoT devices, consumer electronics, and industrial control systems.

  2. What are the key features of the MKL26Z64VFT4R?

    • The MKL26Z64VFT4R features an ARM Cortex-M0+ core, 64KB flash memory, 16KB RAM, multiple communication interfaces, and low power consumption, making it suitable for battery-powered applications.

  3. How can I program the MKL26Z64VFT4R microcontroller?

    • The MKL26Z64VFT4R can be programmed using various integrated development environments (IDEs) such as Keil, IAR Systems, and NXP's MCUXpresso IDE.

  4. What are the typical voltage and current requirements for the MKL26Z64VFT4R?

    • The MKL26Z64VFT4R typically operates at a voltage range of 1.71V to 3.6V and has low power consumption, making it suitable for battery-operated devices.

  5. Can the MKL26Z64VFT4R interface with other components or sensors?

    • Yes, the MKL26Z64VFT4R supports various communication interfaces such as SPI, I2C, UART, and GPIO, allowing it to interface with a wide range of components and sensors.

  6. What are some common applications of the MKL26Z64VFT4R in technical solutions?

    • Common applications include sensor nodes, smart home devices, wearable electronics, motor control, and portable healthcare devices.

  7. Does the MKL26Z64VFT4R support real-time operating systems (RTOS)?

    • Yes, the MKL26Z64VFT4R is capable of running RTOS such as FreeRTOS, enabling multitasking and efficient resource management in complex applications.

  8. Are there any development boards available for prototyping with the MKL26Z64VFT4R?

    • Yes, there are development boards such as the NXP FRDM-KL26Z that provide a convenient platform for prototyping and testing applications based on the MKL26Z64VFT4R.

  9. What kind of security features does the MKL26Z64VFT4R offer?

    • The MKL26Z64VFT4R includes hardware security features such as a secure boot loader, cryptographic accelerators, and tamper detection, enhancing the overall security of embedded systems.

  10. Is there a community or forum where I can find support for using the MKL26Z64VFT4R in technical solutions?

    • Yes, NXP's community forums and online resources provide valuable support and information for developers working with the MKL26Z64VFT4R and related technologies.