MPXHZ6130A6U
Introduction
The MPXHZ6130A6U is a pressure sensor belonging to the category of integrated silicon pressure sensors. It is commonly used for measuring absolute pressure in various applications due to its high accuracy and reliability. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the MPXHZ6130A6U.
Basic Information Overview
- Category: Integrated Silicon Pressure Sensor
- Use: Measurement of Absolute Pressure
- Characteristics: High Accuracy, Reliability
- Package: Not specified
- Essence: Pressure Sensing
- Packaging/Quantity: Not specified
Specifications
- Pressure Range: 0 to 130 kPa
- Supply Voltage: 4.75 V to 5.25 V
- Output Type: Analog
- Operating Temperature Range: -40°C to 125°C
- Accuracy: ±1.5% Full Scale Span (typical)
Detailed Pin Configuration
The MPXHZ6130A6U has a standard pinout configuration with specific pins designated for supply voltage, ground, and analog output.
| Pin Number | Function | |------------|--------------| | 1 | Vout | | 2 | Vsupply | | 3 | NC | | 4 | NC | | 5 | GND |
Functional Features
- High Accuracy: The sensor provides precise measurements of absolute pressure.
- Rugged Design: Suitable for harsh environments due to its robust construction.
- Low Power Consumption: Ideal for battery-powered applications.
Advantages and Disadvantages
Advantages
- High Accuracy
- Robust Construction
- Low Power Consumption
Disadvantages
- Lack of Packaging Information
- Limited Operating Temperature Range
Working Principles
The MPXHZ6130A6U operates on the principle of piezoresistive sensing, where changes in pressure cause a corresponding change in the resistance of the sensing element. This change is then converted into an analog output signal proportional to the applied pressure.
Detailed Application Field Plans
The MPXHZ6130A6U is suitable for a wide range of applications including: - Automotive Systems - Industrial Automation - Medical Devices - HVAC Systems - Consumer Electronics
Detailed and Complete Alternative Models
- MPXHZ6400AC6T1
- MPXHZ6115AC6T1
- MPXHZ6250AC6T1
- MPXHZ6115AC6U
In conclusion, the MPXHZ6130A6U is a highly accurate and reliable pressure sensor suitable for various applications. Its robust design and low power consumption make it an ideal choice for demanding environments.
[Word Count: 410]
기술 솔루션에 MPXHZ6130A6U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure, here are 10 common questions and answers related to the application of MPXHZ6130A6U in technical solutions:
Q: What is MPXHZ6130A6U? A: MPXHZ6130A6U is a pressure sensor designed for use in various applications, including automotive, industrial, and medical devices.
Q: What is the operating voltage range of MPXHZ6130A6U? A: The operating voltage range of MPXHZ6130A6U is typically 4.75V to 5.25V.
Q: What is the pressure range that MPXHZ6130A6U can measure? A: MPXHZ6130A6U can measure pressure within the range of 0 to 130 kPa (0 to 18.9 psi).
Q: How does MPXHZ6130A6U communicate with microcontrollers or other devices? A: MPXHZ6130A6U typically communicates using an analog voltage output proportional to the sensed pressure.
Q: Can MPXHZ6130A6U be used in harsh environments? A: Yes, MPXHZ6130A6U is designed to operate reliably in harsh environments, making it suitable for industrial and automotive applications.
Q: What is the accuracy of MPXHZ6130A6U? A: The typical accuracy of MPXHZ6130A6U is around ±1.5% full-scale span over the specified temperature range.
Q: Is MPXHZ6130A6U suitable for measuring liquid pressure? A: MPXHZ6130A6U is designed for measuring dry air and non-corrosive gases, so it may not be suitable for direct measurement of liquid pressure.
Q: Can MPXHZ6130A6U be used in battery-powered devices? A: Yes, MPXHZ6130A6U's low power consumption makes it suitable for use in battery-powered devices.
Q: What is the temperature range within which MPXHZ6130A6U operates? A: MPXHZ6130A6U typically operates within a temperature range of -40°C to 125°C.
Q: Are there any special considerations for mounting MPXHZ6130A6U in a system? A: It is important to follow the manufacturer's guidelines for proper mounting and handling to ensure accurate and reliable performance of MPXHZ6130A6U.