The CAT24C01YI-GT3 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.
The CAT24C01YI-GT3 is available in an 8-pin SOIC (Small Outline Integrated Circuit) package.
The essence of the CAT24C01YI-GT3 lies in its ability to store and retrieve data reliably in a non-volatile manner. It provides a convenient solution for storing critical information in electronic systems.
The chip is typically sold in reels or tubes, with a quantity of 2500 units per reel/tube.
The CAT24C01YI-GT3 features the following pin configuration:
The CAT24C01YI-GT3 utilizes a floating gate transistor structure to store data. When programming or erasing, an electric charge is applied to the floating gate, altering its electrical characteristics. This change determines whether the transistor represents a logical "0" or "1". The stored data can be accessed by applying appropriate voltage levels to the address and control pins.
The CAT24C01YI-GT3 finds applications in various fields, including:
These alternative models offer increased storage capacity while maintaining similar characteristics and functionality to the CAT24
Sure! Here are 10 common questions and answers related to the application of CAT24C01YI-GT3 in technical solutions:
Q: What is CAT24C01YI-GT3? A: CAT24C01YI-GT3 is a 1K-bit I2C Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by ON Semiconductor.
Q: What is the operating voltage range for CAT24C01YI-GT3? A: The operating voltage range for CAT24C01YI-GT3 is typically between 1.7V and 5.5V.
Q: What is the maximum clock frequency supported by CAT24C01YI-GT3? A: CAT24C01YI-GT3 supports a maximum clock frequency of 400 kHz.
Q: How much data can be stored in CAT24C01YI-GT3? A: CAT24C01YI-GT3 has a storage capacity of 1 kilobit, which is equivalent to 128 bytes.
Q: Can CAT24C01YI-GT3 be used for both read and write operations? A: Yes, CAT24C01YI-GT3 supports both read and write operations, allowing data to be stored and retrieved from the EEPROM.
Q: Is CAT24C01YI-GT3 suitable for low-power applications? A: Yes, CAT24C01YI-GT3 is designed for low-power operation, making it suitable for battery-powered devices or energy-efficient systems.
Q: Does CAT24C01YI-GT3 have any built-in security features? A: No, CAT24C01YI-GT3 does not have built-in security features. It is a standard EEPROM without any hardware encryption or protection mechanisms.
Q: Can CAT24C01YI-GT3 withstand harsh environmental conditions? A: CAT24C01YI-GT3 has an industrial temperature range of -40°C to +85°C, making it suitable for operation in various environments.
Q: What is the typical write endurance of CAT24C01YI-GT3? A: CAT24C01YI-GT3 has a typical write endurance of 1 million cycles, meaning it can be written to and erased approximately 1 million times before potential failure.
Q: Are there any specific application examples for CAT24C01YI-GT3? A: CAT24C01YI-GT3 can be used in a wide range of applications, including consumer electronics, industrial automation, automotive systems, medical devices, and more, where non-volatile memory storage is required.
Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.