이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
CAT24C04C5ATR

CAT24C04C5ATR

Product Overview

Category

The CAT24C04C5ATR belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The CAT24C04C5ATR retains stored data even when power is removed.
  • Electrically erasable: Data can be erased and reprogrammed electronically.
  • High density: This chip has a storage capacity of 4 kilobits (512 bytes).
  • Low power consumption: It operates at low voltage levels, making it energy-efficient.
  • Fast write speed: The CAT24C04C5ATR offers quick data writing capabilities.

Package

The CAT24C04C5ATR is available in a small surface-mount package. It is commonly found in an 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of the CAT24C04C5ATR lies in its ability to store and retrieve data reliably, even in the absence of power. It provides a compact and efficient solution for non-volatile memory requirements in electronic systems.

Packaging/Quantity

These chips are typically sold in reels or tubes containing multiple units. The exact quantity may vary depending on the supplier and customer requirements.

Specifications

  • Storage Capacity: 4 kilobits (512 bytes)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Endurance: 1 million cycles
  • Data Retention: 100 years

Detailed Pin Configuration

The CAT24C04C5ATR features an 8-pin configuration with the following pin assignments:

  1. A0: Address Input
  2. A1: Address Input
  3. A2: Address Input
  4. GND: Ground
  5. SDA: Serial Data Input/Output
  6. SCL: Serial Clock Input
  7. WP: Write Protect
  8. VCC: Power Supply

Functional Features

  • Random Access: The CAT24C04C5ATR allows random access to any memory location, enabling efficient data retrieval.
  • Sequential Read: It supports sequential read operations, allowing for faster data access in consecutive memory locations.
  • Write Protection: The WP pin can be used to protect the stored data from accidental modification.
  • I2C Interface: This chip utilizes the widely-used I2C (Inter-Integrated Circuit) protocol for communication with other devices.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data retention even during power loss.
  • High-density storage capacity in a compact form factor.
  • Low power consumption extends battery life in portable devices.
  • Fast write speed enables quick data updates.
  • Compatibility with the I2C interface simplifies integration into existing systems.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively slower read and write speeds compared to some alternatives.
  • Vulnerable to electromagnetic interference (EMI) due to its small package size.

Working Principles

The CAT24C04C5ATR operates based on the principles of EEPROM technology. It utilizes electrically controlled floating gate transistors to store and retrieve data. When data is written, an electrical charge is applied to the floating gate, altering its conductivity and storing the desired information. To read the data, the transistor's conductivity is measured, allowing the stored information to be retrieved.

Detailed Application Field Plans

The CAT24C04C5ATR finds applications in various fields, including:

  1. Embedded Systems: It is used in microcontrollers and embedded systems for storing configuration data, calibration values, and firmware updates.
  2. Consumer Electronics: This chip is employed in devices like smart TVs, set-top boxes, and audio equipment to store user preferences, settings, and log data.
  3. Automotive: The CAT24C04C5ATR is utilized in automotive electronics for storing critical data such as mileage, vehicle identification numbers (VIN), and diagnostic information.
  4. Industrial Automation: It finds application in industrial control systems for storing parameters, sensor calibration data, and production logs.

Detailed and Complete Alternative Models

  1. AT24C02: This EEPROM chip offers a smaller storage capacity of 2 kilobits but shares similar characteristics and pin configuration with the CAT24C04C5ATR.
  2. CAT24C08: With double the storage capacity of the CAT24C04C5ATR, this chip provides 8 kilobits of non-volatile memory.
  3. ST24C04: This alternative model from STMicroelectronics offers similar specifications and functionality to the CAT24C04

기술 솔루션에 CAT24C04C5ATR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of CAT24C04C5ATR in technical solutions:

  1. Q: What is CAT24C04C5ATR? A: CAT24C04C5ATR is a 4K-bit I2C Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by ON Semiconductor.

  2. Q: What is the operating voltage range for CAT24C04C5ATR? A: The operating voltage range for CAT24C04C5ATR is typically between 1.7V and 5.5V.

  3. Q: What is the maximum clock frequency supported by CAT24C04C5ATR? A: CAT24C04C5ATR supports a maximum clock frequency of 400 kHz.

  4. Q: How many bytes of data can be stored in CAT24C04C5ATR? A: CAT24C04C5ATR has a storage capacity of 512 bytes, organized into 32 pages of 16 bytes each.

  5. Q: Can CAT24C04C5ATR be used for both read and write operations? A: Yes, CAT24C04C5ATR supports both read and write operations, allowing data to be written to and read from the EEPROM.

  6. Q: Does CAT24C04C5ATR have any built-in write protection features? A: Yes, CAT24C04C5ATR provides a hardware write protection feature that can be enabled to prevent accidental writes to the EEPROM.

  7. Q: What is the typical endurance of CAT24C04C5ATR? A: CAT24C04C5ATR has a typical endurance of 1 million write cycles, meaning it can be written to and erased up to 1 million times.

  8. Q: What is the typical data retention period of CAT24C04C5ATR? A: CAT24C04C5ATR has a typical data retention period of 200 years, ensuring that stored data remains intact for long durations.

  9. Q: Can CAT24C04C5ATR operate in harsh environmental conditions? A: Yes, CAT24C04C5ATR is designed to operate in a wide temperature range (-40°C to +85°C) and is suitable for various industrial applications.

  10. Q: Are there any application examples where CAT24C04C5ATR can be used? A: Yes, CAT24C04C5ATR can be used in various applications such as smart meters, automotive systems, medical devices, and consumer electronics where non-volatile memory storage is required.

Please note that these answers are general and may vary depending on specific requirements and use cases.