ON Semiconductor
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
FCP20N60_G

FCP20N60_G

Product Overview

Category: Power MOSFET
Use: Power electronics applications
Characteristics: High voltage, high current capability
Package: TO-220AB
Essence: Power switching and amplification
Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Voltage Rating: 600V
  • Current Rating: 20A
  • RDS(ON): 0.25Ω
  • Gate Charge (Qg): 50nC
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The FCP20N60_G has a standard TO-220AB pin configuration with three pins: gate, drain, and source.

Functional Features

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Advantages and Disadvantages

Advantages: - Suitable for high power applications - Low conduction losses - Fast switching times

Disadvantages: - Higher gate drive requirements compared to lower voltage MOSFETs - More sensitive to voltage spikes due to higher voltage rating

Working Principles

The FCP20N60_G operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET allows current to flow through it, acting as a switch or amplifier in power electronic circuits.

Detailed Application Field Plans

The FCP20N60_G is commonly used in: - Switching power supplies - Motor control - Inverters - Audio amplifiers - LED lighting

Detailed and Complete Alternative Models

  • IRFP460: Similar voltage and current ratings
  • STP20N60: Comparable specifications and package type
  • FDPF20N60: Alternative from a different manufacturer with similar characteristics

This comprehensive entry provides an in-depth understanding of the FCP20N60_G, covering its product details, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

기술 솔루션에 FCP20N60_G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum voltage rating of FCP20N60_G?

    • The maximum voltage rating of FCP20N60_G is 600V.

  2. What is the maximum continuous drain current of FCP20N60_G?

    • The maximum continuous drain current of FCP20N60_G is 20A.

  3. What is the on-state resistance (RDS(on)) of FCP20N60_G?

    • The on-state resistance (RDS(on)) of FCP20N60_G is typically 0.2 ohms.

  4. What type of package does FCP20N60_G come in?

    • FCP20N60_G comes in a TO-220 package.

  5. What are the typical applications for FCP20N60_G?

    • FCP20N60_G is commonly used in power supplies, motor control, and lighting applications.

  6. What is the operating temperature range of FCP20N60_G?

    • The operating temperature range of FCP20N60_G is -55°C to 150°C.

  7. Does FCP20N60_G have built-in protection features?

    • FCP20N60_G does not have built-in protection features and may require external circuitry for overcurrent or overvoltage protection.

  8. Is FCP20N60_G suitable for high-frequency switching applications?

    • Yes, FCP20N60_G is suitable for high-frequency switching due to its low on-state resistance and fast switching characteristics.

  9. What gate-source voltage is required to fully turn on FCP20N60_G?

    • A gate-source voltage of around 10V is typically required to fully turn on FCP20N60_G.

  10. Can FCP20N60_G be used in parallel to increase current handling capability?

    • Yes, FCP20N60_G can be used in parallel to increase current handling capability, but proper thermal management is essential to ensure balanced current sharing.